Filters

Secure Checkout
Your Shopping Cart Is Empty

Secure Checkout

SKU: BSTK-KIT-BMA6012PIR BMA6012P 12x Channel, 6x Zone 70V/100V/8 Ohm Commercial Multi Combination Amplifier with IR Remote


Open Box
Purchase BMA6012P 12x Channel, 6x Zone 70V/100V/8 Ohm Commercial Multi Combination Amplifier with IR Remote
  • SKU: BSTK-KIT-BMA6012PIR multi-zone-amp-8ohms-70v-switchable-12-channel-pam1270

    BMA6012P 12x Channel, 6x Zone 70V/100V/8 Ohm Commercial Multi Combination Amplifier with IR Remote

  • $420.00

    Compare at: $499.99 You Save $79.99

    Sold Out. Please check back later for an ETA. Notify Me When Back In Stock!
    FREE Delivery by ,
    If ordered within hours and minutes
    (*Orders over $50*) Not Shipping to ?
    More Delivery Options

Calculate Shipping

Guarantee

Lifetime Tech Support

*Open Box Units - Open box units may not arrive in original packaging or their packaging may have signs of use. However, all B-Stock/Open Box Units are tested to ensure products are in 100% working condition before listing.*

The OSD BMA6012PIR is a major step forward in installation amplifiers technology. It features either Twelve Zone mono channels (70V) or Six Stereo Zones (8/4 Ohm) or a combination of both 70V and 8/4 Ohm 85% class D design technology, can operate as 6 independent Stereo Zone amplifiers. Self-explanatory Input and Output connections are easy to follow since any of the 12 mono amplifiers can be connected to either 70-Volt, 8-Ohm or 4-ohm speaker circuits.

Each of the 12 mono amplifiers has their own input and output connectors and level Controls. Up to 6 stereo Zones (4-ohm or 70-Volt at 50Watts/channel), 6 mono/bridged Zone amplifiers (110 Watt bridged 8-ohm). Each zone can be configured independently allowing a combination of Stereo 4-ohm or 70Volt and Mono/Bridged 8-ohm. Dual-function LEDs on the front panel provide both activity and Clip indication for each pair of amplifiers. Additional features selectable on the back panel include Six Limiter Button and Six Stereo/Bridge modes for the individual Stereo or Bridged Mono Zones. The Channel Input Line/Bus switch selects between either the Bus Input (button depressed) or the individual Zone's Input signal.

The BMA6012PIR includes a RS232 for IP interface with Home Automation Systems Additional features include: any amplifier with no signal at its input is automatically shut off and the CA1250 is Multi Voltage; able to operate either on 110V-120V/60Hz or 220V-240V /50Hz AC mains.

Warning: California's Proposition 65

Warning:

WARNING: This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Design Type: Class D
  • Peak Power Output: 60 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.1% THD+N: 30W
  • Maximum 4 ohm stereo output power at less than 0.1% THD+N: 50W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.1% THD+N: 100W
  • Maximum 70V/100V output power at less than 0.1% THD+N: 30W
  • Frequency Response: 20Hz to 20kHz+/-1Db
  • Impedance: 8 ohm to 4 ohm stable
  • Signal to Noise Ratio: 90dB A-Weighted 1Kz
  • Turn on options: manual on, signal sensing, and 12V Trigger mode
  • Unique bus system distributes a signal from 1 source to multiple locations
  • Input and Output Terminals: zone IR, mute & status terminal, zone speaker terminal, zone line/ bus trigger in, master control in/out, RS232 terminal, zone line in
  • 12 Independent Channels / up to 6 stereo zones
  • Rack Mountable? Yes, rack mount ears included
  • Dual Source Switching? Yes
  • 12 zone mono channels (70V) or 6 stereo zones (8/4 ohm)
  • Dimensions (W x H x D): 16.7" x 4" x 14.25"
  • Weight: 34 lbs
  • Warranty: 2 years

No Questions asked yet!