Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-ICE600WRS 6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS


Purchase 6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS
  • SKU: OSD-ICE600WRS outdoor-in-ceiling-speakers

    6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS

  • $69.99

    Compare at: $99.95 You Save $29.96

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

Relax in the tub and enjoy beautiful sound with these water-resistant 6.5" in-ceiling speakers! With 150W power handling, these in-ceiling speakers are the solution to bringing quality audio to high moisture areas, and are constructed of durable, moisture-resistant materials for use in high-humidity areas such as bathrooms, laundry rooms, kitchens, under outdoor eaves or covered porches. Sold in pairs, these weather-resistant speakers are also great for covered porches and patios! The aluminum grill cover is rust-resistant for wet application. The ICE600WRS weather-resistant in-ceiling speaker pair works well with a CL3 in-wall rated speaker wire, which is designed to run inside walls.

Pivoting Tweeter
The job of the tweeter is to deliver the higher frequencies of music and soundtracks. The tweeter is also adjustable, meaning it can be aimed toward the listening area. This can make a big difference in sound quality especially for dialog and higher frequencies.

How Does this Speaker Mount in the Ceiling?
Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.

What Type of Speaker Wire and What Gauge?
Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

Testing the Sound Quality of In-Ceiling Speakers
Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.

For a retrofit installation, no construction bracket is needed.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Speaker Type: 6.5" Weather Resistant Indoor/Outdoor Ceiling Speaker
  • Woofer: 6.5" Polypropylene Cone with Santoprene Surround
  • Tweeter: 1" Pivoting Polycarbonate Dome
  • Frequency Response: 48Hz-20kHz
  • Power Handling: 150W
  • Sensitivity: 90 dB
  • Impedance: 8 Ohms
  • Weather-resistant for High Moisture Situations
  • Perfect for Outdoor or Indoor Use
  • Inputs: Spring Loaded Binding Posts
  • Install-friendly Dog Ear Installation Brackets
  • See New Construction Brackets For Compatibility
  • Diameter & Depth: 9" x 3.5"
  • Cutout Diameter: 7.75"
  • Sold As: Pair
  • Warranty: 10 Years
43 Questions asked on 6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS

Rick • 12/17/2019, 2:17:43 PM Q I want to replace a pair of MK650's with the ICE600WRS. Will this speaker fit properly in the existing holes for the MK650?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Rick, The cut out diameter for the MK650 is 8 1/8" when the cut out for the ICE600WRS is 7 5/8" so it is slightly smaller. It would be able to work still as the outer trim would cover the hole. If you are able to cut a bigger hole, I would suggest the ICE800WRS which the cut out is 9 5/16" CS 2545
kcohen48@yahoo.com • 12/17/2019, 2:17:43 PM Q I have a 7 1/2 " cutout in my patio ceiling. One of my current speakers is blown so I am looking to replace both speakers - what do you recommend to fit the cutout
Customer Service • 12/17/2019, 2:17:43 PM
A HI, The ICE600WRS have a 7 5/8" cutout and the ICE800WRS 9 5/16" cutout so either of these speakers can work as long as you don't mind cutting a little bit more. CS 2590
Joe • 12/17/2019, 2:17:43 PM Q Is there a recommendation for added weatherproofing of these speakers? I have used these speakers on a covered outdoor porch for 3 years in the salt air of coastal Florida. The outside grate covering eventually rusted. I am now replacing them and would like to know what else I can do to prevent this. Should I add a coat of rust preventive paint? To do this, I suppose I would loose the mesh cloth that adheres to the inside of the grate. Also, an installer here said he sprays the speakers with lubricant (although bugs stick to it). Any suggestions?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Joe, You can use a Rust-O-Leum paint for extra rust resistance. Yeah, the mesh cloth will have to be removed before painting and glued back on after if still usable.
nathan • 12/17/2019, 2:17:43 PM Q Is the grill on this speaker paintable? My customer would like these to be able to match the bronze finish shower trims for the can light trims. since the profile matches so closely, they would like the finishes to look at least similar.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Nathan, Yes - these speakers are able to be painted. Just make sure you use the best possible method to ensure the holes in the grills do not get covered by the paint.
Mike • 12/17/2019, 2:17:43 PM Q If installing these in ceiling, do I need to purchase a bracket or does the box come with it?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Mike, You do not need to install a pre-construction bracket for installation, but if you want to, they are sold separately. Unless this is a new construction install, just cut the hole, connect the wire and then it will clamp into place.