Mobile Navigation
My Account

1.888.779.4968

Call for Support
Home / Product Category / SPEAKERS / Ceiling Speakers / Ceiling In-Wall Speaker Brackets and Boxes / Ceiling Speaker Brackets for 8" Ceiling Speakers / NCCB8 New Construction Bracket Pair For 8" In Ceiling Speaker

NCCB8 New Construction Bracket Pair For 8" In Ceiling Speaker

Product code: OSD-NCCB8

In Stock
OSD Price: $20.95
Compare at: $35.00 You Save: $14.05 (40%)
Sold in pairs 1 = 1 pair
Qty:
30-Day Money Back Guarantee
LIFETIME TECH SUPPORT

Features & Specifications

8" ceiling speakers, this new construction bracket is installed when the studs or joists are exposed before mounting the sheet rock or ceiling tiles. New construction brackets are not required when you purchase OSD Audio speakers as all models feature dog-eared clamps that secure speakers to the ceiling. However, new construction brackets do provide additional support and allow you to determine the exact placement of the speaker while providing a template to cut the mounting hole.


Cut-Out Hole Diameter: 9.5"

QUESTIONS & ANSWERS

14 Questions & 14 Answers
Robert
from Crystal Beach, FL asked:
October 31, 2018
Can anyone confirm if these will work with Polk Audio 80 F/X-LS? I can't find Polk's brackets. Everyone is out of stock.
1 Answer
Hi Robert: The Niles cutout is 9.38", the cutout size on lour NCCB8 is 9.5". These should work fine for your Niles which have an outer dimension of 11.125" so you have more than 3/4" overhang. TL/5268
Tim Leahy
on November 2, 2018

Arvin
from Utah asked:
June 27, 2018
I am in need of mounting two speakers to an exterior soffit with no other support than the beams in the ceiling. The vinyl soffit is not strong enough to hold any speaker. Are these designed to be mounted to the ceiling beams and then after the vinyl soffit is installed I could screw the speakers directly to this ring? Is this ring strong e lift to support a speaker only by the two side strips? If not how do you mount speakers to the underbelly of an overhead porch cover?
1 Answer
HI Arvin: The Ring with the two wings should work for your application. They will work for both 16" to 24" joists depending on how far apart your particular joists are. The wings are wide enough for two screws to hold them in place. Another option would be our AP650 speakers which have a unique mounting bracket that both swivels and tilts so you could mount it vertically so two screws would go directly into one of your joists. And it possibly has a broader dispersion pattern for your application. TL/5080
Customer Service - Q&A
on June 28, 2018

Randall
from Chillicothe, Ohio asked:
June 13, 2018
Are these set up for 16 on center, or 24 on center joists to be used wig soffit in a patio?
1 Answer
Hi Randall: The 8" kits feature wings that are 18" long and 6.5" just under 18". So you have plenty of overhang for 24 inches for both sizes. The wings can be cut down for 16" on center as well. TL/5055
Tim Leahy
on June 17, 2018

Scott
from NC asked:
June 6, 2018
Will the nccb8 construction bracket work with ice800wrs 8" ceiling speakers?
1 Answer
HI Scott: The NCCB8 has a cutout of 9.5". The cutout needed for the ICE800WRS is 9.0". The Diameter of the speaker is 10.25". That leaves you 1/8" overhang for the Dog ears to grab on to. The bracket features a ring that is raised a quarter inch that the dog ears will attach to. It will not have a large margin of error. TL/5040
Tim Leahy
on June 7, 2018

Al
from Ottawa, Canada asked:
February 24, 2018
Will these work with Yamaha NS-IW360C ceiling speakers? According to their manual, the template cut-out they provide is 9-7/16” diameter.
1 Answer
Hi Al: The OSD NCCB8 New Construction Bracket is 9.5" or 8 1/2" which will work for the Yamaha which is speaker with a cutout of 9 7/16. Just a note, I did not verify the Cutout size. Even Yamaha's own site did not list a cutout so if you have the speaker it my be worth while to measure and verify yourself. TL/4815
Customer Service - Q&A
on March 3, 2018

Michael
from Salt Lake City, Utah asked:
January 22, 2018
I need a bracket with a 9 5/8" opening. Where can I find them?
1 Answer
Hi Michael: The bracket you need is the NCBC8-K New Construction Bracket Pair For 8" In Ceiling Speaker. This has 9.8" opening and will work with your 9 5/8 speaker. These are currently out of stock.. Check with our customer service to find out an ETA. Good luck TL/4767
Customer Service - Q&A
on January 26, 2018

Nick
from Indiana asked:
January 2, 2018
Will these work with Monoprice Caliber In-Ceiling Speakers, 8in Fiber 2-Way? Overall D: °11.3" x 3.6" (°287 x 91 mm) Cutout: °9.69" (°246mm)
1 Answer
HI Nick: The NCCB8 will not work with your Monoprice speakers. The cutout is not large enough for those speakers. The NCCB8 is only 9.5". You need 9.69". The NCCB8-K is actually what you need at 9.8" but these are currently out of stock. New shipment due by February 2018. TL/4724
Customer Service - Q&A
on January 2, 2018

Keyur
from USA asked:
October 9, 2017
Will this work with Yamaha NSIC800WH?
1 Answer
Hi Keyur: The NCCB8 would be too small with a cutout of 9 3/8. You will need at least 9 3/4". So look at our NCBC8-K; New Construction Bracket Pair For 8" In Ceiling Speaker with a cutout of 9.8" TL/4582
Customer Service - Q&A
on October 12, 2017

Lee
from Boston asked:
October 9, 2017
Will these fit Polk RC80i speakers? Thanks
1 Answer
HI Lee: The cutout dimensions are the same 9 3/8" so the bracket should work for your application. TL/4584
Customer Service - Q&A
on October 12, 2017

Tom Nguyen
from California asked:
September 5, 2017
This item is sold in pair (2 brackets?), so if i have 6 yamaha speakers then how many bracket should i order? Thanks
1 Answer
Hi Tom: Are these six speakers different then the 6.5" 3 way speakers you were asking about the NCBC8 K new Construction Bracket? If so you will need 3 pair of these for your six speakers. But the NCBC8 K will work for the NS-IW280CWH. TL/4554
Customer Service - Q&A
on September 21, 2017

Ashton
from Denver, CO asked:
August 4, 2017
Does this bracket also fit your ICE850 speaker? If not, do you have a bracket that does?
1 Answer
Hi Ashton: Yes this is the only New Construction Bracket that will work for the ICE850. It is 3/8: wider than the actual speaker so there will be a small gap but should not affect you installation. TL/4506
Customer Service - Q&A
on August 6, 2017

Derek
from Ca asked:
July 24, 2016
Will these fit most 8" speakers. I have Pyle PDIC80 and cant find brackets
1 Answer
Hi Derek: The Pyle Speakers show a cutout hole of 9 3/8" which is the exact opening size of these new construction brackets. Should work fine. Good luck TL/3999
Customer Service - Q&A
on July 25, 2016

Eric Van Cleave
from Hot Springs Village, AR. asked:
January 10, 2012
We are still concerned about our installation. The mount we have is a circle with one side flat and smooth. The other side has a inner ring that sticks out about a 1/2 inch. Is the part that sticks out more supposed to face out? Our rep today says the inner part (with the lip that sticks out) is supposed to be facing outward. She has been very helpful and knows here product but since the pictures I see look different than what we have (same part number NCCB8) I just need to know ASAP because the drywall in 2 days. Circle and the 2 wire mesh mounts. The picture shows the way we mounted it...this inner ring/lip facing out.
1 Answer
Hi Eric, The lip needs to be turned downward into the actual hole cut out on the drywall or tile. The wings that snap into the center ring work better when the ring is turned down. TL/MAG
Customer Service - Q&A
on January 11, 2012

Justin Byers
from Ohio asked:
December 7, 2011
Can you give me the exact inside dimension (diameter across) of the inside of these brackets?
1 Answer
the NCCB8 measures 9 5/8"
Customer Service - Q&A
on December 7, 2011

Product Reviews

4.6
5 Reviews
5
60% (3)
4
40% (2)
3
0% (0)
2
0% (0)
1
0% (0)
60% Recommend this product (3 of 5 responses)
By ben gentile
new jersey
May 2, 2013
brackets
made it easy to mount the speakers
By Leonard
Fresno, California
April 18, 2013
NCCB8 Speaker brackets
They are easy to install and look very sturdy. OSD confirmed I can use them for the ACE -850MK speakers since they are out of the bracket usually used for these speakers.
ProsEasy to install Great for new construction. Sheet rock guys will cut the hole for me if the bracket is up. Great price.
By Nick Ramos
San Diego, CA
January 28, 2013
Hard to beat value - install tips
Hard to beat, as similar products can cost several times as much for no apparent reason. The rings are plastic and the straps are metal, which makes the mounting nice and sturdy. I used a pneumatic stapler to attach to joists and they went on easy. The total lack of instructions is frustrating because they can click together multiple ways. Here's the correct way: The side of the ring with the lip that sticks out faces DOWN (eg, it will poke thru the drywall hole). The flat side of the ring faces up (into the attic/crawlspace). The arms then click onto the ring from the top, so that the plastic bulge is on the top of the ring. Otherwise, the plastic bulge where the arms snap to the ring will be on the bottom, and the drywall will hit it, making drywall installation impossible. Would be a 5-star product if they just had one sheet of paper with a picture on it as instructions.
ProsGood Value, Easy to Mount
ConsPoor instructions
Best UsesOutdoors, Home Theater, Larger Rooms, Smaller Rooms
By Mr Mick
Wisconsin
June 22, 2012
Very good product
These were very helpful and good quality. However, it would be good if they added instructions. The straps can attach two ways (from both the top and bottom). Unfortunately, I attached the straps incorrectly and had to re-do all of them.
ProsEasy To Set Up, Easy to Mount
By Sam
Phoenix, AZ
June 7, 2010
Nice built braket - we ...
Nice built braket - we have vinyl soffit on our porch. Use this braket to attach to the joists