Filters
Product Search

    Secure Checkout
    Your Shopping Cart Is Empty

    Secure Checkout

    SKU: MX880

    OSD MX8804-Zone 8-Channel Class D Amplifier, 80W/ Channel, Perfect for Home Theater Systems

    Purchase 4-Zone 8-Channel Class D Amplifier, 80W/ Channel, Perfect for Home Theater Systems - MX880
    • Outdoor Speaker Depot SKU: MX880
    • In Stock

      $549.99

      Compare at: $799.99
      You Save: $250

    • Countdown Truck
      FREE Delivery by ,
      Order within hours and minutes
      Change Shipping Zip ? Free Shipping Over $50
      More Delivery Options

    Lifetime Tech Support

    Guarantee

    Lifetime Tech Support

    Our MX880 is a powerful 4-zone 8-channel digital amplifier for commercial and residential audio systems that require reliable power in multiple zones. A slim 2U, rack-mountable and cool-running multi-room amplifier, the MX880 includes eight channels rated at 80 Watts each at 4 ohms/50 watts at 8-ohms and can be configured as the main amplifier for an audio distribution system such as for background music, paging, and multi-zone audio or as an amplifier for 5.1 or 7.2 home theater surround sound systems.

    Features:
    • High power four-zone/12-channel amplifier that supplies audiophile-level sound to distributed audio systems and home theaters
    • Provides 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms)
    • Uses highly-efficient Class D technology that runs cooler and keeps distortion low
    • Independent 4-zone control with global and independent zone triggering
    • Includes a bridged switch per each zone; both channels can be bridged internally with a single connection (left input) output (160 watts at 8 ohms)
    • Special protection circuitry safeguards the amplifier from thermal overload and short circuits
    • Includes Bus Global 12V Trigger and Dual Bus Inputs/Outputs 
    • Signal auto-sensing detects a signal to power up and powers down when a signal is not detected 
    • Pair with the NERO Link Streaming Module for the ultimate setup 
    • Front-panel status indicators 
    • Rack-mountable with hardware included
    Bridgeable with Independent Zone Control 
    When used with an audio distribution preamp or matrix processor, each zone can independently drive one of several different sources by using each zone’s line audio inputs, and if a particular area needs higher power, then two zones can be bridged for 160 watts per channel x 2 at 8 ohms. 

    Designed for Installation Flexibility 
    The MX880 accommodates a wide range of audio applications with global and independent zone triggering, audio sense circuitry with adjustable gain/vol per channel, two Bus Inputs/Outputs and independent left and right line inputs per zone. With high performance and ultra-low distortion output, the MX880 Multi-Zone Amplifier provides unmatched sound quality for any audio system.

    Pair with the NERO Link Streaming Source Module and Player App
    The NERO Link Streaming Source Module is an ideal match for our MX series Multi-Channel Amplifiers. The streaming module controlled by the OSD Audio Streaming Player App is available for either your Android or Apple smartphone or tablet for access to Spotify, Tidal, Napster, Intune, iHeart Radio, and other options. You can start with a single NERO Link connected to the Bus 1 input or two modules connected to the Bus2 and configured between the available zones. You can even add a NERO Link for each available zone, from one to four for the MX880, one to six for the MX1280 or one to eight for the MX1680. All or any combination can be grouped through the App for maximum flexibility. 

    Class D Efficiency 
    Our MX880 uses highly efficient Class D digital circuitry.  Class D amplifiers use output transistors that are fully turned on or off during operation, which keeps distortion low and efficiency is high (93%). Class D amps combine the best qualities of both class A and B technologies and are ideal for distributed audio and home theater setups because these amps run cooler than traditional amps and can easily run multiple pairs of speakers at a 4-ohm or 8-ohm load.

    Warning: California's Proposition 65

    Warning:

    This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

    • Power Output:
    • 80W /Channel, 1KHz into 4 Ohms, One Zone Driven
    • 50W /Channel, 1KHz into 8 Ohms, One Zone Driven
    • 160W, 1KHz into 8 ohms, Bridge
    • Amplifier Channels:
    • MX 880: 8 Channels, 4 Zones
    • Signal-to-NoiseRatio: >90dB A-weighted
    • Frequency Response: 20Hz to 20KHz + 1.7/-1dB at 1W output into 8 Ohms
    • Input Sensitivity: 600 mV for 80W @ 1 KHz 4 Ohm One Zone, 700 mV for 50W @ 1 KHz 8 Ohm One Zone
    • Input Impedance: >22K Ohms Line Input
    • Trigger Inputs / Outputs: Bus and Zone @12VDC
    • Zone Line Input: Line In, Bus In 1, Bus In 2 select switch per zone
    • Bridge Mode: Select Stereo or Bridge mode per zone 8 Ohm only
    • Speaker Connectors: Detachable speaker terminals support up to 14awg wire
    • Delay Time: When audio signal or trigger is not present after 5 munites.
    • Power Requirements (Switchable):
    • MX880: 100-120VAC 60Hz 600W Max, 220-240VAC 50Hz 600W Max
    • Fuse Rating:MX880:  100-120V/T5A, 250V, 220-240V/T2.5A, 250V
    • Dimensions (L x W x H): 16.81” x 16.14” x 3.46”
    • Weight: MX880: 19 lbs

    No Questions asked yet!