Filters

Secure Checkout
Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AMP200 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200


Purchase 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200
  • SKU: OSD-AMP200 high-power-stereo-amplifier

    2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

  • $299.99

    Compare at: $399.99 You Save $100.00

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

A team OSD favorite, the AMP200 is a high current 2-channel amp with loads of features. This amp lets you home run (directly to the back of the amp) two pairs of speakers or 4 speakers total. Since it's high current, you can add up to 4 pairs of speakers (8 speakers total) by adding OSD speakers selectors such as the DSM4. Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching circuit. When you connect two independent sources number (say your iPod and a TV in another room) source one takes priority when it is active. When source one is turned off, source number two comes on. Note: You cannot play two sources simultaneously. For this feature you need a multi-channel amp like our MX1260. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

High Performance, High Current Power 
Rated at 80 watts per channel at 8 ohms, and stable down to 2 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching automatic circuit. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

AMP200 offers 80 watts RMS per channel of power, with bridgeable outputs for up to 250 watts RMS. A, B, or A+B speaker selector switches make managing connected outputs easy. And a signal-sensing power on feature lets the amp power up automatically when you power on your source. 

Automatic Source Switching 
The AMP200 can automatically switch between connected sources, thanks to a priority signal-sensing feature. So if you have your iPod connected to input 2, then decide you want to watch a movie, when the DVD player connected to the main input 1 is turned on, the AMP120 will automatically switch to that source. 

A variable delay control lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds, so things like gaps between CD tracks won't accidentally switch your inputs. 

Works with Smartphones, iPods, and Other Portable Devices 
Use the AMP200 to connect your Smartphone or other portable music device (as long as you have a headphone jack.) The AMP200 includes two RCA signal level inputs marked as red for right and white for left. Using an RCA-to-mini stereo cable (sold separately), plug the 3.5mm stereo connector into the headphone output of your iPod or other portable device, then connect the RCAs to one of the inputs of the AMP200.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 200 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 80W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 125W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 250W
  • Frequency Response: (20Hz to 20kHz) +0.0dB, -0.5dB
  • Impedance: 8 ohm to 2 ohm stable
  • Signal to Noise Ratio: -103dB referred to rated power at 4 ohms
  • Turn on options: maunal on, signal sensing, and 12V Trigger mode
  • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
  • Input and Output Terminals: Interrupting line input, main input/output, 12V trigger, speaker zone A output, speaker zone B output, RCA input (4 total)
  • Rack Mountable? Yes
  • Dual Source Switching? Yes
  • Dimensions (W x H x D): 16.5" x 3.5" x 13.5"
  • Weight: 30 Lbs
  • Warranty: 2 years
129 Questions asked on 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

Jason • 12/17/2019, 2:17:43 PM Q I am looking to purchase this item. I also am looking to purchase the WR150 2.4Hz wireless speakers and AP840 8" patio speakers. Will this amp run all of these speakers? Can I add more speakers for inside of the house? If I can run more speakers, how many and at how many watts? Do I need any more equipment? Thanks.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Jason, We offer the AMP200 high current amp in a 4-Zone kit. If you add a speaker selector like our DSM4, you can expand up to 4 pairs. This amp is ideal for driving multiple pairs. You could put in volume controls as well. CL/MA 1695
Jason • 12/17/2019, 2:17:43 PM Q I am looking to have speakers throughout my house and outside. I have four rooms with 2 in-ceiling 8" speakers, 2 patio 8" speakers, and 2 wireless rock speakers. That is a total of 12 speakers. I am looking to have one amp and selector to run these speakers. I plan to run the wires up across the attic to the seperate speakers in the rooms. What amp, selector, etc. do I need?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Jason, The wireless rock speakers should be self powered (with an internal amp). To determine your amp and speaker selector, count how many passive (non-powered) speakers you have that are to be run off speaker cable. For up to 4 pairs, the AMP200 and the DSM4 would be great. For 6 to 8 pairs, go with the AMP300 and either the DSM6 or DSM8 speaker selector. CL/MA 1698
Dr. B. • 12/17/2019, 2:17:43 PM Q I have a Yamaha RX-V2095 AV receiver. I also have SSV C4 and amp 200. Before I bought these I was told there is "dedicated room2 output that allows you to play a different source for your room 2 at the same time you are using the receiver for surround sound" from TL/MA- 1510. Where is this located on the Rx-V2095? Does something have to changed ie jumper pins? I am bit lost on finding this output.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Dr. B, Take a look at page 79-80 of your Yamaha manual. Page 79 has the details (complete with diagram) regarding the receiverís multi-room/multi-source capability. You may wish to contact Yamaha directly if you have technical questions. CL/MA 1728
Scott • 12/17/2019, 2:17:43 PM Q I am currently using a Sony str-dh130 to power 2 sets of 8 ohm speakers. The speakers are sometimes turned up around max volume for extended periods. Occasionally this will cause the receiver to go into protect mode and stop playing. Would the AMP200 be able to play music at a level comprable to that Sony receiver while avoiding problems with overheating? What if we added one more set of speakers, as well? If we were going to use three sets of speakers, could we run them through a speaker selector and run the speaker selector just into either the speaker a or speaker b input of the amplifier, or would we lose out on power from the other input? Thanks for the help!
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Scott, The AMP200 allows you to connect the two pairs of speakers and not worry about overheating and shutting down. You could add a third pair of speakers as well and add a speaker selector like our ISS4. You could even use your STR-DH130 to power a pair of speakers off Speaker A and then connect the AMP200 to the Tape output using a RCA patch cord (then power a pair of speakers off Speaker A and Speaker B). The Sony can be used as a receiver for one pair of 8-ohm speakers and then use the Sony receiverís pre-amp capabilities for the AMP200 to power the two pair of speakers. Now you can turn any of the three speakers on or off or play all three at once because you have an A/B switch on the Sony (speaker A) and A/B on the AMP200. The Sony will also control the volume for all three pairs of speakers; set the gains of the AMP200 to the desired levels and use the SONY master volume control for total system control. You could even add a third pair of speakers to the AMP200 for further expansion. TL/MA - 1739
Greg • 12/17/2019, 2:17:43 PM Q Connecting to an Onkyo 609...do I use the RCA plug on the Zone 2 output or do I connect via the Zone 2 speaker terminals on the Onkyo..and for whichever is correct, where does it connect to the AMP200?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Greg, Since you don't need the receiver for the power, use the line level inputs (RCA). You could use either, but the RCA outputs should be as your first choice. CL/MA 1777