Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AMP200 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200


Purchase 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200
  • SKU: OSD-AMP200 high-power-stereo-amplifier

    2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

  • $299.99

    Compare at: $399.99 You Save $100.00

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

A team OSD favorite, the AMP200 is a high current 2-channel amp with loads of features. This amp lets you home run (directly to the back of the amp) two pairs of speakers or 4 speakers total. Since it's high current, you can add up to 4 pairs of speakers (8 speakers total) by adding OSD speakers selectors such as the DSM4. Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching circuit. When you connect two independent sources number (say your iPod and a TV in another room) source one takes priority when it is active. When source one is turned off, source number two comes on. Note: You cannot play two sources simultaneously. For this feature you need a multi-channel amp like our MX1260. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

High Performance, High Current Power 
Rated at 80 watts per channel at 8 ohms, and stable down to 2 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching automatic circuit. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

AMP200 offers 80 watts RMS per channel of power, with bridgeable outputs for up to 250 watts RMS. A, B, or A+B speaker selector switches make managing connected outputs easy. And a signal-sensing power on feature lets the amp power up automatically when you power on your source. 

Automatic Source Switching 
The AMP200 can automatically switch between connected sources, thanks to a priority signal-sensing feature. So if you have your iPod connected to input 2, then decide you want to watch a movie, when the DVD player connected to the main input 1 is turned on, the AMP120 will automatically switch to that source. 

A variable delay control lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds, so things like gaps between CD tracks won't accidentally switch your inputs. 

Works with Smartphones, iPods, and Other Portable Devices 
Use the AMP200 to connect your Smartphone or other portable music device (as long as you have a headphone jack.) The AMP200 includes two RCA signal level inputs marked as red for right and white for left. Using an RCA-to-mini stereo cable (sold separately), plug the 3.5mm stereo connector into the headphone output of your iPod or other portable device, then connect the RCAs to one of the inputs of the AMP200.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 200 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 80W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 125W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 250W
  • Frequency Response: (20Hz to 20kHz) +0.0dB, -0.5dB
  • Impedance: 8 ohm to 2 ohm stable
  • Signal to Noise Ratio: -103dB referred to rated power at 4 ohms
  • Turn on options: maunal on, signal sensing, and 12V Trigger mode
  • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
  • Input and Output Terminals: Interrupting line input, main input/output, 12V trigger, speaker zone A output, speaker zone B output, RCA input (4 total)
  • Rack Mountable? Yes
  • Dual Source Switching? Yes
  • Dimensions (W x H x D): 16.5" x 3.5" x 13.5"
  • Weight: 30 Lbs
  • Warranty: 2 years
129 Questions asked on 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

esf7461 • 12/17/2019, 2:17:43 PM Q Currently have the AMP200 connected as zone 2 from an Onkyo 8555 (driving 2 pair of 8 ohm speakers and RCA connected to amp. This device is connected to an Onkyo NR609 as zone 2 via line outs. Recently had to change line outs between 8555 and AMP200 due to "bad cable" and since replacing the line connection, the auto sensing trigger no longer switches off/on the amp from/to standby. Is there a way (or should I have) to reset the amp after replacing the connector cables? Thanks.
Customer Service • 12/17/2019, 2:17:43 PM
A Hello, You shouldn't have to reset the amplifier, but it wouldn't hurt to unplug it. If this problem continues, you can send it in for warranty service. You will find information on the link "how to return a product" at the bottom of our home page. CL/MA 1991
Mark • 12/17/2019, 2:17:43 PM Q Hi, i am looking to hook up 6 pairs of spkrs. have a spkr selector box for the 6 pairs with idependent volume . will this amp be able to hook up to a XM radio source? this will be the only music played through it. I guess Im asking if it could take the place of a 120 watt/ch steroercvr and run all 6 pairs of 8 ohm spkrs
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Mark, The XM radio connects via RCA cables. The AMP200 is a high current amp with dual source so two sources can be plugged in and one can be given priority for "auto sensing." CL/MA 2018
mark • 12/17/2019, 2:17:43 PM Q if i use a ipod with this unit. Would i not need a stereo rcvr? also would i hook up the A/B speakerson amp to a/b on my 6 channel spkr selector with ind. volume controls.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Mark, You can connect your iPod with an RCA mini cable directly to the amp. http://www.outdoorspeakerdepot.com/6ft-mini-to-stereo-adapter.html To connect to a dual source speaker selector with six zones, consider our AMP300 and only connect to A. Input B would connect to a separate amp. CL/MA 2028
Jason • 12/17/2019, 2:17:43 PM Q I have a Yamaha receiver that only powers one set of speakers. I have them connected in my family room for both stereo and surround TV. I just added 2 outdoor inground Bose speakers in my back yard. I was considering just using your speaker selector to connect both sets of speakers and connect that to my receiver. Can I do that, or should I be connecting both sets of speakers to this AMP200 and then connecting that to my receiver? 2nd question, if I use the amp, I assume I just connect the 2 main speakers from the home theatre, the additional surround sound stay connected to the receiver?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Jason Typically you will let your home theater receiver drive your surround sound and ideally the AMP200 driving any additional sets with or without the use of a speaker selector. Your receiver connects to the AMP200 via RCA cables providing the audio source. It does have an additional input, line 2 for a second source if applicable. Your receiver might suffice with just a speaker selector but it could strain your receiver and you might not get the volume you are looking for. I would go with the high current AMP200, in the long run you can drive up to 4 pairs- (8 total speakers) if you ever wanted to expand. CL 2029
Ricardo • 12/17/2019, 2:17:43 PM Q Will this amplifier be able to handle 3 pairs of AP670 in bridged mode? If so, what type of wiring would you reommend (parallel, series, etc)?
Customer Service • 12/17/2019, 2:17:43 PM
A Yes. The AMP200 can usually handle up to 4-5 pairs of speakers depending on the size of the speaker and the desired volume of the entire system. Wire gauge really depends on the length of the run from amp to speaker. 16-gauge up to 80ft 14-gauge up to 200ft 12-gauge over 200ft -BM