Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AMP200 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200


Purchase 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200
  • SKU: OSD-AMP200 high-power-stereo-amplifier

    2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

  • $299.99

    Compare at: $399.99 You Save $100.00

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

A team OSD favorite, the AMP200 is a high current 2-channel amp with loads of features. This amp lets you home run (directly to the back of the amp) two pairs of speakers or 4 speakers total. Since it's high current, you can add up to 4 pairs of speakers (8 speakers total) by adding OSD speakers selectors such as the DSM4. Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching circuit. When you connect two independent sources number (say your iPod and a TV in another room) source one takes priority when it is active. When source one is turned off, source number two comes on. Note: You cannot play two sources simultaneously. For this feature you need a multi-channel amp like our MX1260. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

High Performance, High Current Power 
Rated at 80 watts per channel at 8 ohms, and stable down to 2 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching automatic circuit. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

AMP200 offers 80 watts RMS per channel of power, with bridgeable outputs for up to 250 watts RMS. A, B, or A+B speaker selector switches make managing connected outputs easy. And a signal-sensing power on feature lets the amp power up automatically when you power on your source. 

Automatic Source Switching 
The AMP200 can automatically switch between connected sources, thanks to a priority signal-sensing feature. So if you have your iPod connected to input 2, then decide you want to watch a movie, when the DVD player connected to the main input 1 is turned on, the AMP120 will automatically switch to that source. 

A variable delay control lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds, so things like gaps between CD tracks won't accidentally switch your inputs. 

Works with Smartphones, iPods, and Other Portable Devices 
Use the AMP200 to connect your Smartphone or other portable music device (as long as you have a headphone jack.) The AMP200 includes two RCA signal level inputs marked as red for right and white for left. Using an RCA-to-mini stereo cable (sold separately), plug the 3.5mm stereo connector into the headphone output of your iPod or other portable device, then connect the RCAs to one of the inputs of the AMP200.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 200 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 80W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 125W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 250W
  • Frequency Response: (20Hz to 20kHz) +0.0dB, -0.5dB
  • Impedance: 8 ohm to 2 ohm stable
  • Signal to Noise Ratio: -103dB referred to rated power at 4 ohms
  • Turn on options: maunal on, signal sensing, and 12V Trigger mode
  • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
  • Input and Output Terminals: Interrupting line input, main input/output, 12V trigger, speaker zone A output, speaker zone B output, RCA input (4 total)
  • Rack Mountable? Yes
  • Dual Source Switching? Yes
  • Dimensions (W x H x D): 16.5" x 3.5" x 13.5"
  • Weight: 30 Lbs
  • Warranty: 2 years
129 Questions asked on 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

Jamie • 12/17/2019, 2:17:43 PM Q Hi, Will this work in New Zealand where our mains power is 240V? Also what you recommend to power 2 outdoor speakers and 6 indoor speakers.? I also need radio tuner? thanks very much!
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Jamie Thanks for the question. Yes the amp200 and the amp300 are capable of switching to 230-240V power. For an application to power 8 speakers (4 pairs), consider the amp300. Its high current capability along with its increased power output over the amp200 would be a better fit for your system and also provide you with the capability to add more speakers in the future. For a radio tuner, any home receiver or radio device with an RCA (red & white) stereo output would pair nicely with our amplifiers. DB 2126
FT • 12/17/2019, 2:17:43 PM Q I have a Pioneer VSX-51 and want to connect this amp to my zone two output on my receiver to run two sets of speakers for my pool area. One set of Polk Atrium 7 and one set of Bose Free Space 51's. Will this amp handle both sets of speakers without a volume control or do I need to install an outdoor volume control between the amp and speakers?
Customer Service • 12/17/2019, 2:17:43 PM
A HI FT: The Amplifier will have no problem driving both pairs of speakers at the same time. You can even hook up the BOSE on Speaker A and the Polk Atrium 7's on Speaker B so you can play either A or B or both. You can add a Impedance matching Volume control for each if you are looking to have more control for matching both speakers volume levels to each other. But you can go with the AMP first and add the Volume Controls afterwards. TL-2150
Rich • 12/17/2019, 2:17:43 PM Q I have Denon Dr-AN5. I would like to use the speaker lines out of the denon to connect to this amp's speaker line in connections then power 4 of OSD ceiling speakers. They are 8 ohm MK850. The denon does not have stability to run all 4. Would this work?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Rich: Perfect choice if you are talking two pair or four each. Just connect one pair to Speaker A and the second pair to Speaker B. This will allow you to switch between the two pair A or B or both at the same time. Technically you could run both pair of Speaker A and add a third pair to Speaker B and run both A and B at the same time. This is very efficient High Current Amplifier that runs is 2 ohm stable. Three pair of 8 ohm speakers wired in Parallel produces 2.6 ohm. TS-2189
jake • 12/17/2019, 2:17:43 PM Q I am looking at this package with the 4 way speaker selector and the 4 volume controls. I am wondering it I can bridge the output of this amp, and run that to the speaker selector "input". Then the 4 speaker outputs would go to the volume controls? Any reason why I couldn't? Thanks
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Jake, See my answer to your follow up question. Thanks!
jake • 12/17/2019, 2:17:43 PM Q I think I answered my own question... I was just trying to get more power out of the amp. I will only be using speaker A, and looks like speaker b will go unused thanks
Customer Service • 12/17/2019, 2:17:43 PM
A Correct! If only one zone is active, all power will be directed through that zone, as the two zones are dependent. If you need even more power, you can always go with the AMP300. There are two 'Master Level' volume controls on the back of these amps which control the volume on the left and right channels. You will get the most power out of either amp when these dials are turned up to max. We usually recommend keeping them between the 12 - 3 o'clock position. Let us know if you have further questions. Thanks! -BM 2317