Filters

Secure Checkout
Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AMP200 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200


Purchase 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200
  • SKU: OSD-AMP200 high-power-stereo-amplifier

    2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

  • $299.99

    Compare at: $399.99 You Save $100.00

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

A team OSD favorite, the AMP200 is a high current 2-channel amp with loads of features. This amp lets you home run (directly to the back of the amp) two pairs of speakers or 4 speakers total. Since it's high current, you can add up to 4 pairs of speakers (8 speakers total) by adding OSD speakers selectors such as the DSM4. Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching circuit. When you connect two independent sources number (say your iPod and a TV in another room) source one takes priority when it is active. When source one is turned off, source number two comes on. Note: You cannot play two sources simultaneously. For this feature you need a multi-channel amp like our MX1260. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

High Performance, High Current Power 
Rated at 80 watts per channel at 8 ohms, and stable down to 2 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching automatic circuit. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

AMP200 offers 80 watts RMS per channel of power, with bridgeable outputs for up to 250 watts RMS. A, B, or A+B speaker selector switches make managing connected outputs easy. And a signal-sensing power on feature lets the amp power up automatically when you power on your source. 

Automatic Source Switching 
The AMP200 can automatically switch between connected sources, thanks to a priority signal-sensing feature. So if you have your iPod connected to input 2, then decide you want to watch a movie, when the DVD player connected to the main input 1 is turned on, the AMP120 will automatically switch to that source. 

A variable delay control lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds, so things like gaps between CD tracks won't accidentally switch your inputs. 

Works with Smartphones, iPods, and Other Portable Devices 
Use the AMP200 to connect your Smartphone or other portable music device (as long as you have a headphone jack.) The AMP200 includes two RCA signal level inputs marked as red for right and white for left. Using an RCA-to-mini stereo cable (sold separately), plug the 3.5mm stereo connector into the headphone output of your iPod or other portable device, then connect the RCAs to one of the inputs of the AMP200.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 200 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 80W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 125W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 250W
  • Frequency Response: (20Hz to 20kHz) +0.0dB, -0.5dB
  • Impedance: 8 ohm to 2 ohm stable
  • Signal to Noise Ratio: -103dB referred to rated power at 4 ohms
  • Turn on options: maunal on, signal sensing, and 12V Trigger mode
  • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
  • Input and Output Terminals: Interrupting line input, main input/output, 12V trigger, speaker zone A output, speaker zone B output, RCA input (4 total)
  • Rack Mountable? Yes
  • Dual Source Switching? Yes
  • Dimensions (W x H x D): 16.5" x 3.5" x 13.5"
  • Weight: 30 Lbs
  • Warranty: 2 years
129 Questions asked on 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

Michael • 12/17/2019, 2:17:43 PM Q how do you hook up a sub woofer? using just 1 set of bookshelf speakers.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Michael, If you are wanting to connect a powered subwoofer, simply run an RCA cable from the Line 2 output of the AMP200 to the subwoofer's input. Note that for this to work, you must be running your music source to Line 2 input. If you are running the source to the Line 1 input, the Line 2 output will not activate. If you are wanting to run a passive (non powered) subwoofer, it must have a built-in crossover and you would run speaker wire from Zone B on the AMP200 to the sub. Let us know if that about answers your question. Thanks! -BM 2507
randy • 12/17/2019, 2:17:43 PM Q I wan to use a projector as a source, the projector has a 3.5mm Stereo jack for a output, I would use a Y mini jack with RCA connectors going to Line 1 in on the AMP200, will this work, the projector will be a Casio XJ-ST155
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Randy, That should work. It will be just like connecting a handheld device such as an iPhone or iPad. We do have 3.5mm to RCA cables as well. -BM 2510
randy • 12/17/2019, 2:17:43 PM Q I wan to use a projector as a source, the projector has a 3.5mm Stereo jack for a output, I would use a Y mini jack with RCA connectors going to Line 1 in on the AMP200, will this work, the projector will be a Casio XJ-ST155
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Randy, That should work. It will be just like connecting a handheld device such as an iPhone or iPad. We do have 3.5mm to RCA cables as well. -BM 2510
Joe • 12/17/2019, 2:17:43 PM Q Hello, I am new to amplifiers and need you to educate me. My living room is a 5.1 system powered by a Pioneer VSX-1020 a/v receiver and contains a DirecTV Genie and blu-ray player. My back patio consists of a TV, DirecTV Mini Genie, volume knob, and outdoor speakers powered by a Yamaha RX-V375. So essentially an amplifier safely pushes more power through the speakers making it louder? Is this the correct amp that I need? How do I install it? Thank you! Subwoofer: Boston Acoustics CS Sub 10 Center: Definitive Technology Procenter 2000 In-Cieling speakers: (4) Proficient Audio C626 Outdoor speakers: Proficient Audio AW525
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Joe, Adding an AMP to your setup would give your speakers more power but your speakers can only handle a certain amount of power so you wouldn't want to push too much to them or you will damage them. If you were to get the AMP200, you would run from the receiver's Zone 2 or line level out (RCA) to the amp. From the amp you would run to the volume control and then on to the speakers. The AMP200 can handle anything from a 2ohm - 8ohm load, so you can run more than one pair off each zone on the AMP200. The surround sound receiver will run your 5.1 speakers, while the AMP200 will run your other speakers in stereo. CS 2534
mark mathews • 12/17/2019, 2:17:43 PM Q when i turn the front volume control to just below half way my amp is tripping off. this just started happening when i hooked my amp up to my ditect tv reciever to listen to pandora it never did this when i listened to pandora off my phone...?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Mark, What line do you have the directTV hooked up to, 1 or 2? You want to connect your main source into your line 2. If the line is not seeing enough power, it switches to line 1. Is this what is happening? CS 2575