The OSD Audio AMP120 Amplifier is a high performance 2-channel power amp for powering two paris of 8 Ohm speakers. You can use the AMP120 as a single zone, rear channel amp for Dolby Surround Sound systems, or to bump up the power of your OSD outdoor speakers.

High Performance Amp with 50 Watts per Channel

The AMP120 is a high performance 2 channel power amp that packs big, custom installer features into an affordable package, such as front panel mounted volume and balance knobs, manual and signal sensing power on, automatic source switching, and 5 way speaker wire binding post for accommodating both bare wire and banana plugs.

AMP120 offers 50 watts RMS per channel of power, with bridgable outputs for up to 150 watts RMS. A, B, or A+B speaker selector switches make managing connected outputs easy. Line 2 also offers a powered line out for connecting a subwoofer to your secondary source. And a signal sensing power on feature lets the amp power up automatically when you power on your source.

Automatic Source Switching

The AMP120 can automatically switch between connected sources, thanks to a priority signal sensing feature. So if you have your iPod connected to input 2, then decide you want to watch a movie, when th DVD player connected to the main input 1 is turned on, the AMP120 will automatically switch to that source.

Works with iPod and Other Portable Devices

Use the AMP120 to connect your iPod or other portable music devices. The AMP120 includes two RCA signal level inputs marked as red for right and white for left. Using an RCA to mini stereo cable (sold seperately), plug the 3.5mm stereo connector the headpgone output of your iPod or other portable devices, then connect the RCAs to one of the inputs of the AMP120

Warning: California's Proposition 65

---

Warning:

This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

• 75 Watts per channel Peak Stereo Power
• Bridged Mono Output 160 Watts Peak (Minimum 8 ohm)
• 50W RMS per Channel at 8 Ohms with .20% THD
• 60W RMS per Channel at 4 Ohm, with .02% THD
• A or B Speaker Output, 8 Ohm Speakers Minimum
• Dual Source Priority Switching
• Turn on Choices: Auto Sensing or Manual On/Off switch
• Dims: (L x D x H) 21 x 11 x 5.25
• Weight: 9.6 lbs