Uncover unbeatable value with our Open Box item-rigorously inspected, quality-assured, and performance-tested for an exceptional audio experience. Take advantage of this excellent deal, where a minor packaging imperfection translates into a significant discount on your premium Outdoor Speaker Depot product.

• Delivers 150 watts per channel at 8 ohms or 300 watts per channel at 4 ohms
• Bridges to 450 watts mono at 8 ohms for higher-output single-speaker applications
• Selectable Speaker A, Speaker B or A+B outputs for flexible multi-room audio setups
• Main and Interrupt inputs automatically prioritize a connected local audio source
• Includes signal-sensing auto power, 12V trigger, balance, volume, bass and treble controls

The OSD Audio XMP300 is a powerful and flexible stereo amplifier designed for home audio, distributed sound and dedicated zone applications. Its high-current output supports a wide range of speaker systems, while selectable A/B speaker outputs allow one or two pairs of speakers to be connected. When operating both speaker outputs simultaneously, each connected speaker should have an impedance of 8 ohms or greater.

For systems with multiple audio sources, the Interrupt input automatically overrides the Main input whenever an active local source is detected. Once the local source is turned off or muted, the amplifier returns to the primary source after a brief delay. A Main output can also pass the primary audio signal to another amplifier or additional audio zones. Signal sensing, 12V trigger operation and rear-mounted tone controls make the XMP300 well suited for both standalone and integrated audio installations.

Warning: California's Proposition 65

Warning:  

This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

• Product Type: Digital Stereo Power Amplifier
• Stereo Output at 8 Ohms: 150W x 2, <1% THD+N
• Stereo Output at 4 Ohms: 300W x 2, <1% THD+N
• Bridged Mono Output at 8 Ohms: 450W, 1kHz, <1% THD+N
• Frequency Response: 10Hz–30kHz, -2dB/+1dB
• Minimum Speaker Impedance: 4 Ohms Stereo; 8 Ohms Bridged
• Signal-to-Noise Ratio: 100dB below 150W output into 8 ohms with 20kHz low-pass filter
• Channel Separation: 65dB at 1kHz, referenced to 150W output into 8 ohms
• Input Sensitivity: 700mV for rated 150W output into 8 ohms
• Bass and Treble Control: ±12dB at 100Hz and 10kHz
• Turn-On Options: Manual, signal-sensing auto-on and 12V trigger
• Source Switching: Main and Interrupt inputs with automatic priority switching
• Speaker Outputs: Selectable Speaker A, Speaker B or A+B
• Connections: Interrupting line input, Main input/output, 12V trigger and Speaker A/B outputs
• AC Power Consumption: 450W Maximum
• Dimensions (W x H x D): 16.9" x 2.15" x 11"
• Net Weight: 7.9 lbs
• Warranty: 2 Years