Skip to main content
Free shipping over $50 | 60-day returns
Since 2003

Account 0 Cart
Purchase OSD Audio ICE800TTWRS 8" Weather Resistant Stereo In Ceiling Speaker, 150W, Single
  • outdoor-ceiling-speakers
  • In-Ceiling Speaker

  • ICE800TTWRS 8" Weather Resistant Stereo In Ceiling Speaker, 150W, Single

  • $76.29
    8" Dual Tweeter Weatherproof
    • Stereo sound from one speaker, dual voice coil
    • Indoor or outdoor ceilings
    • Weather-resistant, rust-resistant aluminum grille
  • In Stock
    Countdown Truck
    FREE Delivery by ,
    Order within hours and minutes
    Change Shipping Zip ? $50+ Free Shipping (Exceptions Apply)
    More Delivery Options

  • Free shipping over $50
  • 60-day money-back guarantee
  • Lifetime tech support

Lifetime Tech Support

Guarantee

Lifetime Tech Support

Specifications

SKU
OSD-ICE800TTWRS
  • Speaker Type: 8" Weather Resistant Indoor/Outdoor Dual Tweeter Trimless Ceiling Speaker
  • Woofer: 8" Polypropylene Cone with Santoprene Surround
  • Tweeter: Dual 1" Polycarbonate Dome
  • Frequency Response: 38Hz-21kHz
  • Power Handling: 150W
  • Sensitivity: 89 dB
  • Impedance: 8 Ohms
  • Weather-resistant for High Moisture Situations
  • Perfect for Outdoor or Indoor Use
  • Dual Voice Coil (DVC) Provides Stereo Sound Within One Speaker
  • Spray Paintable Rust-Resistant Aluminum Grille Included
  • Inputs: Spring Loaded Binding Posts
  • Install-friendly Dog Ear Installation Brackets
  • See New Construction Brackets For Compatibility
  • Diameter & Depth: 10.24" x 4.13"
  • Cutout Diameter: 9.06"
  • Sold As: Single
  • Warranty: 10 Years

Description

The OSD Audio ICE800TTWRS is an 8 inch weather resistant in-ceiling speaker that delivers stereo sound from a single location. It is made for spaces where a pair of speakers will not fit, such as bathrooms, closets, hallways, laundry rooms and covered porches.

A dual voice coil woofer lets both channels of a stereo signal drive one 8 inch polypropylene cone, while two 1 inch polycarbonate dome tweeters, one for each channel, keep highs clear and detailed. The larger 8 inch cone reaches down to 38Hz for fuller bass. Just connect the left channel conductors to one set of inputs and the right channel conductors to the other.

Built for high moisture areas, the woofer uses a Santoprene surround that stands up to heat, cold and humidity without hardening or cracking, and the aluminum grille is rust resistant. Use it indoors or under covered outdoor eaves and patios. With 150 watts of power handling and 89 dB sensitivity, it works with most stereo amplifiers and receivers.

Built-in dog ear clamps grip the drywall as you tighten the screws, so no mounting brackets are needed for retrofit installs. The grille can be spray painted to match your ceiling. For best results, use CL3 or FT4 rated in-wall speaker wire, 16 gauge up to 100 feet and 14 gauge for longer runs. This is a passive speaker and requires an amplifier or receiver.

Check the Fit

Needs a 9.06 inch cutout and 4.13 inches of clearance above the ceiling; paintable grille is 10.24 inches across. Replacing speakers? Measure the old hole first. Dog ear clamps, no brackets needed. Sold as single stereo speaker

Key Features

  • Stereo From One Speaker: Dual voice coil design plays both left and right channels through a single 8 inch woofer, ideal for bathrooms, closets, hallways and rooms that only have space for one speaker
  • Dual Tweeters, Deeper Bass: Two 1 inch polycarbonate dome tweeters, one per channel, plus an 8 inch polypropylene woofer deliver clear, full sound from 38Hz to 21kHz with 150 watts of power handling
  • Built For Moisture: Santoprene surround resists heat, cold and humidity without hardening or cracking; rust-resistant aluminum grille handles bathrooms, laundry rooms, kitchens and covered patios
  • Simple Wiring: Connect the left channel to one set of terminals and the right channel to the other; 89 dB sensitivity and 8 ohm impedance per channel work with most stereo amplifiers and receivers

Warning: California's Proposition 65
Warning:  

This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Reviews

Customers say

Generated by AI from 20 customer reviews

Customers say the sound quality is excellent, describing it as crystal clear with great bass, along with superior workmanship. They also appreciate the value for money and sturdy build quality, and find the speaker easy to install, with clear instructions making setup a breeze.

Reviews for Outdoor Speaker Depot are collected and verified by Shopper Approved. Read our verified customer reviews.

Bought this? Shopper Approved will email you a link to review it after your purchase.

Questions & Answers

43 Questions asked

What's on your mind?

Erlin • 12/17/2019, 2:17:43 PM Hello, What is the RMS watt power for this speaker? is 150 watts Max Power or RMS? also, can it take 2 4ohm channels to equal 8 ? Can the Tweeters pivot? Thanks,
Customer Service • 12/17/2019, 2:17:43 PM
HI Erlin: The speaker is rated at 150 Watts Peak 75 watts peak. I not sure there is a 4 ohm output on an amplifier or Receiver. It may be 8 ohm typically but have the ability to go to 4 or even 2 ohm. But it depends on the load you apply and in this case the speaker is a dual voice coil speaker that when connected to your amplifier it will show a 8 ohm load. So no problem. Note your amplifier may show a 4 ohm load and list an 8 ohm load which maybe half the power. These speaker at 8 ohm speakers would put less demand and only draw half the power than your rated 4 ohm spec. TL/4499
ryan • 12/17/2019, 2:17:43 PM New to the speaker world....So I am installing a covered 13x36 gable style patio with a pool behind it in the yard. Want to have speakers in the ceiling . How many would I need in this area? I plan on having a Tv out there and would like to be able to have the volume play either over the tv or over the speakers. Also would like to play songs from iphone when needed. What kind of equipment will I need and how many speakers should I get? I would like to hear music while in the pool as well.
Customer Service • 12/17/2019, 2:17:43 PM
HI Ryan: Checkout our Upload Your Plans option on our Outdoor Speaker Depot Web Site. I would suggest submitting a blueprint or diagram of your area plus as many images of the area you can take from different angles. You will need to determine where your equipment will be located as far as amplification and sources. My contact info: [email protected] TL/4519
Christian • 12/17/2019, 2:17:43 PM Hello, Do you see any reason why I wouldn't install these indoor for main areas in my home? I am looking for 8" stereo speakers and the ICE840TT is currently out of stock and this speaker seems to be the same but it is weather proof? I really don't want the trimless so I didn't want to go with the ACE840TT. I was just worried that the sound quality would not be as good as the indoor rated.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Christian: You should to checkout the new ICE840TT WRS, the step up Indoor/outdoor speaker. It has a similar crossover as the ACE840TT. Sound quality is very close. TL/4644
Dave • 12/17/2019, 2:17:43 PM I have two of these hooked up currently. Unfortunately I only hooked up one side of each of these speakers and now I’m regretting it. Unfortunately it was a huge pain in neck to run the wire and I just can’t do it again. My question is can I run a two wire cable from one speaker to the other, like a jumper cable? Would that work?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Dave: A tricky problem, first will need to know what amplifier you are connected to and if it can be bridged mono? You might be able to get away wiring these in series-parallel but will need to know if you can have abridged mono output so you are connecting only the 2 positives from your amp's speaker A, Of course, the amp has to have stereo/Bridged mono switch and be labeled on the output side in order for this to work. Please let me know so I can supply you with a diagram how to wire it. You need four connections for this to work and you have 2 connections per speaker. And it will involve running the additional wire between the two speakers while utilizing the current two conductor cable you already have. [email protected] TL/5027
Byron Carlson • 12/17/2019, 2:17:43 PM If I use a 2 channel amp connected to the ICE800TTWRS and then further connect (in parallel) an AP670's off each side of the ICE800TTWRS, I have 3 questions: 1) Will my AMP experience a 4ohm load? 2) Will my AP 670's keep their stereo separation? 3) Would Volume levels at the AP670 be impacted by this setup. See diagram for clarity.
Customer Service • 12/17/2019, 2:17:43 PM
HI Brian Good questions; 1) Yes, the Amplifier will see a 4-ohm load 2) They should keep their stereo separation if you are concerned then you might run a four conductor speaker wire to each input for the ICE800TTWRS and terminate two of the conductors to one of the input connections. Then take the remaining two conductors and extend them to each AP670 with a new Two conductor speaker cable. You would terminate the two sets of four conductor cable directly to the right and left output of the Amplifier. This connection would become your parallel connecting point. 3) Both the AP670 and ICE800TTWRS have similar specs; I would assume your performance level would be affected by the quality of the Power Amplifier you are using. Our AMP300 and AMP200 would have no problem with a 4-ohm load since they are High Current Amplifiers that are 2-ohm stable. TL/5327