Skip to main content
Free shipping over $50 | 60-day returns
Since 2003

Account 0 Cart
Purchase OSD Audio ICE610 6.5" 2 Way In Ceiling Speakers, 120W, Pivoting Tweeter, Pair
  • htincesp1
  • In-Ceiling Speaker

  • ICE610 6.5" 2 Way In Ceiling Speakers, 120W, Pivoting Tweeter, Pair

  • $98.09
    6.5" 8Ohm 120W
    • Solid, full sound at a value price
    • Retrofit install, no construction bracket needed
    • Butyl rubber surround, paintable snap-in grille
  • In Stock
    Countdown Truck
    FREE Delivery by ,
    Order within hours and minutes
    Change Shipping Zip ? $50+ Free Shipping (Exceptions Apply)
    More Delivery Options

  • Free shipping over $50
  • 60-day money-back guarantee
  • Lifetime tech support

Lifetime Tech Support

Guarantee

Lifetime Tech Support

Specifications

SKU
OSD-ICE610
  • Speaker Type: 6.5" Flush-Mount Ceiling Speakers
  • Woofer: 6.5" Polypropylene Cone with Rubber Surround
  • Tweeter: 0.5" Pivoting PEI Dome
  • Frequency Response: 50Hz - 20kHz
  • Power Handling: 120W
  • Sensitivity: 88 dB
  • Impedance: 8 Ohms
  • Infinite Baffle Design
  • Spray Paintable Snap-In Grille Included
  • Inputs: Spring Loaded Binding Posts
  • Install-friendly Dog Ear Installation Brackets
  • See New Construction Brackets For Compatibility
  • Diameter & Depth: 9.06" x 3.31"
  • Cutout Diameter: 7.95"
  • Sold As: Pair
  • Warranty: 10 Years

Description

The OSD Audio ICE610 is a 6.5 inch 2 way in-ceiling speaker pair that gives builders and homeowners a cost effective way to add quality sound to every room. It is a strong fit for whole home audio, multi-room systems, kitchens, living rooms and home theater surrounds.

Each speaker combines a 6.5 inch polypropylene cone woofer with a butyl rubber surround and a 1/2 inch pivoting PEI dome tweeter. Butyl rubber is tough and moisture resistant and provides excellent damping, with a much longer service life than foam. The pivoting tweeter can be aimed toward your listening area for crisp, focused highs.

With 120 watts of power handling, 88 dB sensitivity and 8 ohm impedance, the ICE610 works with most stereo amplifiers and AV receivers and delivers a wide 50Hz to 22kHz frequency response.

Built-in dog ear clamps grip the drywall as you tighten the screws, so no mounting brackets are needed for retrofit installs. The snap-in grille can be spray painted to match your ceiling. For best results, use CL3 or FT4 rated in-wall speaker wire, 16 gauge up to 100 feet and 14 gauge for longer runs. These are passive speakers and require an amplifier or receiver.

Check the Fit

Needs a 7.95 inch cutout and 3.31 inches of clearance above the ceiling; paintable grille is 9.06 inches across. Replacing speakers? Measure the old hole first. Dog ear clamps, no brackets needed. Sold as pair (2 speakers)

Key Features

  • Balanced Room-Filling Sound: 6.5 inch polypropylene cone woofer and 1/2 inch PEI dome tweeter deliver clear highs, natural vocals and solid bass from 50Hz to 22kHz
  • Pivoting Tweeter: Aim the tweeter toward your seating area for better clarity and imaging, ideal for living rooms, kitchens, bedrooms, media rooms and home theater surrounds
  • 120W Power Handling: 88 dB sensitivity and 8 ohm impedance work with most stereo amplifiers, AV receivers and multi-zone systems; spring loaded terminals for quick wiring
  • Built To Last: Butyl rubber surround offers better damping and a longer life than foam, so the speakers keep sounding good for years

Warning: California's Proposition 65
Warning:  

This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Reviews

Customers say

Generated by AI from 23 customer reviews

Customers say these speakers offer great value for the money and deliver impressive sound quality, working well for spaces like basement game rooms and surround sound setups. They also find them easy to install, with clear instructions and helpful mounting legs.

Reviews for Outdoor Speaker Depot are collected and verified by Shopper Approved. Read our verified customer reviews.

Bought this? Shopper Approved will email you a link to review it after your purchase.

Questions & Answers

14 Questions asked

What's on your mind?

ray • 12/17/2019, 2:17:43 PM My cutout is 8 1/2, will 6 1/2s work or do I need to go 8?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Ray, The ICE610 ceiling speaker’s cut-out diameter is 7 3/4ths inch. We list this in the features and specs under 'view more'. It is easier to make a pre-existing hole larger than smaller. As an alternative, our ICE530 ceiling speakers have a cut out of 6 5/8ths which is almost perfect for your application. CL/MA 1899
David • 12/17/2019, 2:17:43 PM when they say pair is it 1 or 2 speakers
Customer Service • 12/17/2019, 2:17:43 PM
Hi David A pair means 2 speakers, a left and right stereo pair. If the speaker is labeled pair, a quantity of 1 equals one pair (2 speakers). CL/MA 1938
Bruce • 12/17/2019, 2:17:43 PM I am going to paint the speakers. Do you recommend latex paint or spray paint from a can? I am worried about the latex paint and the grill. The spray paint seems to be a better choice.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Bruce: Spray paint works just fine. Make sure there is no cloth on the inside of the grill. If so it needs to be removed and discarded. TL-2098
Jack • 12/17/2019, 2:17:43 PM can I hook this direct to my flat screen tv ( osd audio ice610 )
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jack, The ICE610 is a passive device and would need an amp or receiver to power it. CS 2408
Phil • 12/17/2019, 2:17:43 PM Do I need to purchase impedance matching volume controls? I'm installing speakers in 8 rooms...I already have the splitter, just not sure about the volume controls.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Phil: It depends on the Speaker Selector Box (splitter)you have. Some are better than others for internal protection. While some speaker selectors work better with Impedance Matching Volume Control. As an example when you use our ISS and DSM speaker Selectors and you enable the Protection it cuts the power handling from 140 watts down to 70 Watts. While the TSM series features higher power handling and selectable protection settings. So we recommend using Impedance matching Volume Controls for the ISS and DSM speaker selectors and the TSM Speaker selector on its own. Note: you have to use Impedance Matching Volume Controls for all eight zones. We also offer the ATM7 (7 zone with IR Remote control) and SPW8 (a splitter box) which have no internal protection so we recommend using Impedance matching Volume Controls with both. Good Luck TL/3927