Filters

Secure Checkout
Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-MX1260 MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)


Purchase MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)
  • SKU: OSD-MX1260 6-zone-multi-channel-amp-osd-mx1260

    MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)

  • $574.99

    Compare at: $1259.95 You Save $684.96

    Sold Out. Please check back later for an ETA. Notify Me When Back In Stock!

Calculate Shipping

Guarantee

Lifetime Tech Support

Design and customize a home theater that fits seamlessly into your home decor. Or go big with complete, whole-house audio solutions. Whether you want to maximize your home theater experience or transform your living space, OSD Audio has total solutions to help you get the most out of your movies and music--from clean power amplifiers to in-wall and outdoor speakers, subwoofers, custom controls, and more.

Rated at 40 Watts per channel RMS at 8 ohms, the MX1260 is a serious contender for complex audio systems and will distribute sound to 12 different locations without the risk of overload. Equipped with brains and brawn, this sturdy, rack-mountable high current amp includes 6 zones or 12 channels (speakers), so owning this amp is like having six 2-channel amps in one efficient location.

What is a Multi-Channel Amplifier?
Multi-channel amps incorporate high-efficiency, space-saving digital technology. Multi-channel amps eliminate the complexity of wiring up multiple two-channel amps, save space by reducing the number of components that must be placed in cabinets, and drive down your amplifier costs by as much as a third over multiple two-channel models, or adding impedance matching equipment to the two channel systems. Having a 12 or 16 channel amplifier will allow you to directly connect 12 or 16 rooms, directly to the amplifier without overloading.

Warning: California's Proposition 65

Warning:

 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 60 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 40W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 60W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 80W Frequency Response: 5Hz to 72kHz
  • Impedance: 8 ohm to 4 ohm stable
  • Signal to Noise Ratio: 95dB A-weighted
  • Turn on options: manual on, signal sensing, and 12V Trigger mode
  • Unique bus system distributes a signal from 1 source to multiple locations
  • Input and Output Terminals: Bus 1 & 2 inputs/outputs, individual zone line inputs, speaker terminals
  • 12 Independent Channels / up to 6 stereo zones
  • Rack Mountable: Yes, rack mount ears included
  • Dual Source Switching: Yes
  • Dimensions (W x H x D): 16.7" x 4" x 14.25"
  • Weight: 34 lbs
  • Warranty: 2 years
56 Questions asked on MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)

Setiawan Soetopo • 12/17/2019, 2:17:43 PM Q I bought OSD MX 1260 12 channels x 60 watt serial MX12601012154700411 from Amazon com. I want to ask you 1/ Can you explain about trigger input 3Vrms-75mVrms?. 2/ Electrical for Power 230V is as shown in the label? #/ I need an outdoor speakers, what kind of speaker specification list I have to chose for the best music soun ? or do you have recommendation outdoor music speaker brand for less than $60 ?. thanks
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Setiawan, The trigger input on the OSD MX1260 is what tells the amplifier to turn on and off. 3v-75mv is the voltage range that the port is supported to receive. As far as excellent outdoor speakers for under $60, we have just the item. Take a look at our AP490s: http://www.outdoorspeakerdepot.com/aphifioupapa.html CL/MA 1473
Setiawan • 12/17/2019, 2:17:43 PM Q I have followed your manual but still there is no sound. even the LED zone never light red or blue
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Setiawan, The trigger input on the OSD MX1260 is what tells the amplifier to turn on and off. 3v-75mv is the voltage range that the port is supported to receive. As far as excellent outdoor speakers for under $60, we have just the item. Take a look at our AP490s: http://www.outdoorspeakerdepot.com/aphifioupapa.html CL/MA 1473
Setiawan Soetopo • 12/17/2019, 2:17:43 PM Q Sorry again one more, for reset should I insert a 12 Volt DC cable standard male ? , and should be inserting audio input and connection speaker cable.
Customer Service • 12/17/2019, 2:17:43 PM
A Setiawan, There is no need for 12 v DC, You should operate the MX1260 on Normal mode. CL 1482
Setiawan Soetopo • 12/17/2019, 2:17:43 PM Q There is no sound coming out from my amp, even when I try many configurations for each channel. The only thing working is the LED power button, red if trigger switch on trigger position or red and then become blue if trigger switch on or auto position, However, never lighting on LED. zones (in red or blue). I am very sure there is no current short in my amp.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Setiawan, We'll need more information for diagnose the issue. What do you have connected to your inputs? Have you tried connecting both the Bus Inputs as well as directly to the dedicated channel inputs making sure you have set the switch to the corresponding inputs, Bus1, Bus2 or line input? The LEDs on the front should lite up blue if active and will be red if there is a problem. If the LEDs do not light at all, even though you have the source connected and playing, then there may be a problem with the amp. Please let us know. TL/MA - 1485
Setiawan Soetopo • 12/17/2019, 2:17:43 PM Q Electric power at my house is 220 VAC and the frequency is 50 Hz. I try to use the transformer converter was at 110 VAC and 50 HZ. And my amp was setting on 115 VAC (looks 115 on the red switch on the back amp) According to specification list, this amp should be able to function properly, but why still no sound and the LED zone still never lighting (blue). Do I need a specific converter or It must be two phase frequency output? Please tell me the cheapest converter.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Setiawan, The MX1260 amplifier is setup for multiple voltages. However, you need to set the voltage switch to 230V and change the fuse to T5AL versus the T10AL. You may have blown the fuse. Remove the fuse in the unit and replace with the proper fuse. It will be same style but half the value. Then you can use an adapter plug to connect to the local input plug in Indonesia (either a C-, F- or G-type). The adapter does not do the conversion; that is done internally by the amplifier. Let us know if that helps. TL/MA-1490