Filters

Secure Checkout
Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-MX1260 MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)


Purchase MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)
  • SKU: OSD-MX1260 6-zone-multi-channel-amp-osd-mx1260

    MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)

  • $574.99

    Compare at: $1259.95 You Save $684.96

    Sold Out. Please check back later for an ETA. Notify Me When Back In Stock!

Calculate Shipping

Guarantee

Lifetime Tech Support

Design and customize a home theater that fits seamlessly into your home decor. Or go big with complete, whole-house audio solutions. Whether you want to maximize your home theater experience or transform your living space, OSD Audio has total solutions to help you get the most out of your movies and music--from clean power amplifiers to in-wall and outdoor speakers, subwoofers, custom controls, and more.

Rated at 40 Watts per channel RMS at 8 ohms, the MX1260 is a serious contender for complex audio systems and will distribute sound to 12 different locations without the risk of overload. Equipped with brains and brawn, this sturdy, rack-mountable high current amp includes 6 zones or 12 channels (speakers), so owning this amp is like having six 2-channel amps in one efficient location.

What is a Multi-Channel Amplifier?
Multi-channel amps incorporate high-efficiency, space-saving digital technology. Multi-channel amps eliminate the complexity of wiring up multiple two-channel amps, save space by reducing the number of components that must be placed in cabinets, and drive down your amplifier costs by as much as a third over multiple two-channel models, or adding impedance matching equipment to the two channel systems. Having a 12 or 16 channel amplifier will allow you to directly connect 12 or 16 rooms, directly to the amplifier without overloading.

Warning: California's Proposition 65

Warning:

 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 60 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 40W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 60W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 80W Frequency Response: 5Hz to 72kHz
  • Impedance: 8 ohm to 4 ohm stable
  • Signal to Noise Ratio: 95dB A-weighted
  • Turn on options: manual on, signal sensing, and 12V Trigger mode
  • Unique bus system distributes a signal from 1 source to multiple locations
  • Input and Output Terminals: Bus 1 & 2 inputs/outputs, individual zone line inputs, speaker terminals
  • 12 Independent Channels / up to 6 stereo zones
  • Rack Mountable: Yes, rack mount ears included
  • Dual Source Switching: Yes
  • Dimensions (W x H x D): 16.7" x 4" x 14.25"
  • Weight: 34 lbs
  • Warranty: 2 years
56 Questions asked on MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)

Setiawan Soetopo • 12/17/2019, 2:17:43 PM Q I opened the amp but I didnít see the fuse that you were referring to, but I saw there was a wire not connected properly on P20 , than I fixed it (Please find a picture attached). After that I tried to play, Oh my God, the amp is working fine. The sound is very good, and all zone lighting blue for all channels. Now I ask to you even I disconnected audio input LED Zone still blue ?. After a few minute turn it on, I smell something slightly burn, Is it normal ?. I was wondering, where is the fuse place, Do I need replace with a new fuse T10AL ?. Thank you for your help and patiently responded of my question.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Setiawan, We recommend you change the fuse to the value for 230 Volt, T5AL. Then you will need to make sure you set the voltage switch to 230V. You then can eliminate your up converter and use an adopter plug to connect to your wall outlet. It will also try to duplicate the LED staying on once you disconnect. You may experience a slight burn in smell when an amp is first turned on. If it escalates or continues, you may have a problem. Normally, we would not suggest removing the cover but due to the distance and the fact you may have found the problem that is good news. TL/MA- 1492 Note: We are also loading an image showing customers how to get to the fuse on all our multi- voltage amplifiers.
Dillon • 12/17/2019, 2:17:43 PM Q I would like to connect 20 rock speakers. What amp do you recommend I use?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Dillon, To clarify, you wish to connect 20 each or 10 pairs of rock speakers? Will you be using volume controls? If you mean 10 pairs, the best choice would be our AMP300 along with a TSM12 speaker selector with internal transformers for impedance-matching protection. If there is not enough power, then we recommend adding a second AMP300 and bridging both of them and running one amp as your left channel and the second amp as your right channel. Make sure you use both amps in bridged mono mode. Please let us know more about your setup. TL/MA - 1504
LARRY YETTTER • 12/17/2019, 2:17:43 PM Q i USE A "L-PAD" RADIO SHACK VOLUME CONTROL AT EACH REMOTE SPEAKER LOCATION. MY REMOTE STEREO SPEAKERS ARE 8 OHM. THE L-PAD ARE IMPEDANCE MATCHING INDUCTIVE INTERFACES. PROBLEMS ARE; 1. THE VOLUME CONTROL FROM THE SOURCE (PC GENERATED WITH 365 LIVE INTERNET RADIO OR THE CREATIVE SUSYTEM SOUND BLASTER INTERFACE FROM CD OR USB) AND SENSE THE REMOTE SPEAKERS ARE REMOTE, AS YOU CANNOT HEAR THEM FROM THE AUDIO CENTER, THE VOLUME IS SO VARIABLE THAT IT CANVARY FROM TO FULL FVOLUME IS TOO LOW OR THE LOWEST SETTING IS TOO LOUD. 2.I HAVE BEEN USING 4 STEREO CHANNELS AND ONE SET OF PEAKERS HAVE PROBLEMW FROM DISTORTION TO VOLUME IS NOT MANAGEABLE. THE CHANNEL APPARENTLY HAS FAILED AND AFTER SWITCHING TOANOTHER OPEN CHANNEL THE VOLUME CONTROL HAS FAILED ON ALL CHANNELS. I RE-READ THE OWNER'S MANUEL AND DO NOT SEE AN APPARENT APPROCH TO TROUBLESING THIS PROBLEM. HELP Larry Yetter
Customer Service • 12/17/2019, 2:17:43 PM
A HI LARRY, FOR THIS COMPLEX ISSUE, WE NEED A BETTER UNDERSTANDING OF YOUR WIRING. PLEASE PROVIDE US WITH A BASIC HAND DRAWN DIAGRAM OF HOW EVERYTHING IS CONNECTED IN YOUR SYSTEM. YOU CAN EMAIL THAT TO ME @ CASEY@OUTDOORSPEAKERDEPOT.COM CL/MA 1907
Mike • 12/17/2019, 2:17:43 PM Q Are these Class AB or Class D amplifiers?
Customer Service • 12/17/2019, 2:17:43 PM
A Mike, Thank you. Our amplifiers are Class AB. We really only carry analog amplifiers currently. -BM 2081
Sunday • 12/17/2019, 2:17:43 PM Q I have some questions: 1. Can I use the ISS 8 Zone speaker selector to connect 12 Speakers to this amp? 2. Can I also use SVC 100 volume controls and how do I connect the volume control and the speaker selector? 3. Does the ISS 8 Zone selector support up to 14 Gauge speaker wires? And how does the amp m1260 perform compared to Nuvo Essentia?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Sunday: Question #1, yes if they are six stereo pairs or a combination of single stereo speakers with DVC's (Dual Voice Coils). Question #2) the volume controls are connected between the speaker and speaker selector. The Volume Controls are stereo as well with right and left inputs (+/-). It is recommended using a Volume Control (Impedance Matching VC) for each zone you connect. Then make sure protection switch on the ISS8 is disabled (turned off). If you have 6 stereo pairs connected to six impedance matching Volume controls you will set the switch on the volume controls to 8X. Question #3) Different applications, the MX-1260 is a pure 12 channel six stereo Power Amplifier. The NUVO Essential is a complete control system with the same amount of channels but is also features a pre-amp controlling six zones and includes Key Pads one for each of those zones with two way communication between the Control Amp and key pads. TL - 2096