Filters

Secure Checkout
Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-MX1260 MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)


Purchase MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)
  • SKU: OSD-MX1260 6-zone-multi-channel-amp-osd-mx1260

    MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)

  • $574.99

    Compare at: $1259.95 You Save $684.96

    Sold Out. Please check back later for an ETA. Notify Me When Back In Stock!

Calculate Shipping

Guarantee

Lifetime Tech Support

Design and customize a home theater that fits seamlessly into your home decor. Or go big with complete, whole-house audio solutions. Whether you want to maximize your home theater experience or transform your living space, OSD Audio has total solutions to help you get the most out of your movies and music--from clean power amplifiers to in-wall and outdoor speakers, subwoofers, custom controls, and more.

Rated at 40 Watts per channel RMS at 8 ohms, the MX1260 is a serious contender for complex audio systems and will distribute sound to 12 different locations without the risk of overload. Equipped with brains and brawn, this sturdy, rack-mountable high current amp includes 6 zones or 12 channels (speakers), so owning this amp is like having six 2-channel amps in one efficient location.

What is a Multi-Channel Amplifier?
Multi-channel amps incorporate high-efficiency, space-saving digital technology. Multi-channel amps eliminate the complexity of wiring up multiple two-channel amps, save space by reducing the number of components that must be placed in cabinets, and drive down your amplifier costs by as much as a third over multiple two-channel models, or adding impedance matching equipment to the two channel systems. Having a 12 or 16 channel amplifier will allow you to directly connect 12 or 16 rooms, directly to the amplifier without overloading.

Warning: California's Proposition 65

Warning:

 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 60 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 40W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 60W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 80W Frequency Response: 5Hz to 72kHz
  • Impedance: 8 ohm to 4 ohm stable
  • Signal to Noise Ratio: 95dB A-weighted
  • Turn on options: manual on, signal sensing, and 12V Trigger mode
  • Unique bus system distributes a signal from 1 source to multiple locations
  • Input and Output Terminals: Bus 1 & 2 inputs/outputs, individual zone line inputs, speaker terminals
  • 12 Independent Channels / up to 6 stereo zones
  • Rack Mountable: Yes, rack mount ears included
  • Dual Source Switching: Yes
  • Dimensions (W x H x D): 16.7" x 4" x 14.25"
  • Weight: 34 lbs
  • Warranty: 2 years
56 Questions asked on MX1260 12-Channel, 60W Per Channel, 6 Zone Power Amplifier, Toroidal Transformers. (4 Ohm stable)

Whatley Bush • 12/17/2019, 2:17:43 PM Q I have an onkyo two zone receiver. I have a Sonos connect as one of the sources. I also have a 4 speaker selector Connected to Zone 2. I would like to upgrade to a volume control speaker selector that I could also control with my android tablet. Thanks Whatley Bush 706 691-6041
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Whatley: Questions, What is the current Speaker Selector that you are using (upgrading)? What model ONKYO are you using, does it come with a control Application that you can download to control the basic functions of the AV Receiver? You are having no problems with your current setup (the speaker selector connected to the four pair of speakers)? Note: Most AV Receiver manufacturers recommend going to a external Amplifier when attempting to power multiple speakers on the single Zone 2 output. Even if you went to the SSVC4 as an upgrade we would recommend going to our AMP200 to have the dire ct pre-amp output of the ONKYO. Something we will know if a pre-amp output is available on your Receiver once we know the model number. When you add an SSVC4 with four internal Impedance Matching Volume controls you are adding an additional load to the output more so than the standard speaker selector used previously. And you will still only be able to control the SONOS for the single common output with no control over the mechanical volume controls of the SSVC4. I am not sure we can solve all your questions until you answer our additional questions. But it is a good starting point. TS-2285
Eric • 12/17/2019, 2:17:43 PM Q Hello, I'm trying to drive 8 outdoor Definitive Tech AW6500 speakers in 3 separate zones that I can turn on/off individually. I'm unclear on whether to use the MX1260 or a combo of the AMP300 & TSM12 speaker selector. Any guidance?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Eric, You don't need a 12 zones speaker sector for 8 speakers, as you will be running 2 speakers off each zone typically. I would run an AMP300 to either our DSM4 or SSVC4 speaker selector. The AMP300 would give you optimal power plus some. Thanks! BM 2715
Ben • 12/17/2019, 2:17:43 PM Q I have a house with six zones and two speakers in each zone. Each room has it's own volume control knob as well. Is this the amp I need to power these speakers in all six zones (12 total speakers)? Also, I'm guessing I would need a Sonos amp or connect to stream music through this to all the speakers? Right now all the wiring from the speakers just runs down to one cabinet in the basement but there is no receiver or anything there. It's just an empty box with all the wiring run to it.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Ben, The MX1260 would be a good fit for your system. Each speaker pair would wire to one of the six zones on the amp. You can have separate source for each zone or one source going to all zones.
paulmitford • 12/17/2019, 2:17:43 PM Q Can i use my android note 3 to control each speaker zone with wifi anywhere in my house ?
Customer Service • 12/17/2019, 2:17:43 PM
A Hello, You must connect your source to this amp, as it does not have WiFi or Bluetooth. You can however connect either a WiFi or Bluetooth transmitter via 3.5mm or RCA and then use that to connect your phone to it.
paulmitford • 12/17/2019, 2:17:43 PM Q Can i use my android note 3 to control each speaker zone with wifi anywhere in my house ?
Customer Service • 12/17/2019, 2:17:43 PM
A Hello, You must connect your source to this amp, as it does not have WiFi or Bluetooth. You can however connect either a WiFi or Bluetooth transmitter via 3.5mm or RCA and then use that to connect your phone to it.