Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AMP200 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200


Purchase 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200
  • SKU: OSD-AMP200 high-power-stereo-amplifier

    2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

  • $299.99

    Compare at: $399.99 You Save $100.00

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

A team OSD favorite, the AMP200 is a high current 2-channel amp with loads of features. This amp lets you home run (directly to the back of the amp) two pairs of speakers or 4 speakers total. Since it's high current, you can add up to 4 pairs of speakers (8 speakers total) by adding OSD speakers selectors such as the DSM4. Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching circuit. When you connect two independent sources number (say your iPod and a TV in another room) source one takes priority when it is active. When source one is turned off, source number two comes on. Note: You cannot play two sources simultaneously. For this feature you need a multi-channel amp like our MX1260. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

High Performance, High Current Power 
Rated at 80 watts per channel at 8 ohms, and stable down to 2 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching automatic circuit. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

AMP200 offers 80 watts RMS per channel of power, with bridgeable outputs for up to 250 watts RMS. A, B, or A+B speaker selector switches make managing connected outputs easy. And a signal-sensing power on feature lets the amp power up automatically when you power on your source. 

Automatic Source Switching 
The AMP200 can automatically switch between connected sources, thanks to a priority signal-sensing feature. So if you have your iPod connected to input 2, then decide you want to watch a movie, when the DVD player connected to the main input 1 is turned on, the AMP120 will automatically switch to that source. 

A variable delay control lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds, so things like gaps between CD tracks won't accidentally switch your inputs. 

Works with Smartphones, iPods, and Other Portable Devices 
Use the AMP200 to connect your Smartphone or other portable music device (as long as you have a headphone jack.) The AMP200 includes two RCA signal level inputs marked as red for right and white for left. Using an RCA-to-mini stereo cable (sold separately), plug the 3.5mm stereo connector into the headphone output of your iPod or other portable device, then connect the RCAs to one of the inputs of the AMP200.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 200 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 80W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 125W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 250W
  • Frequency Response: (20Hz to 20kHz) +0.0dB, -0.5dB
  • Impedance: 8 ohm to 2 ohm stable
  • Signal to Noise Ratio: -103dB referred to rated power at 4 ohms
  • Turn on options: maunal on, signal sensing, and 12V Trigger mode
  • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
  • Input and Output Terminals: Interrupting line input, main input/output, 12V trigger, speaker zone A output, speaker zone B output, RCA input (4 total)
  • Rack Mountable? Yes
  • Dual Source Switching? Yes
  • Dimensions (W x H x D): 16.5" x 3.5" x 13.5"
  • Weight: 30 Lbs
  • Warranty: 2 years
129 Questions asked on 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

Eisa Ahmed • 12/17/2019, 2:17:43 PM Q Can I use this amp to power a passive subwoofer?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Eisa, It depends on if the passive subwoofer has a dedicated low-pass filter. If so, you can connect to one of the two speaker outputs. If not, you would be be better off looking at our OSD SMP250 subwoofer amplifier which features either an LFE input or dedicated high-cut filter and phase controls. Is this for music or home theater or both? Will it be connected to a audio/video receiver? Let us know more and we can offer more input. TL?MA - 1488
Sunday • 12/17/2019, 2:17:43 PM Q Does this amp have an aux output or how can I connect it to a music source?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Sunday, The AMP200 does not have an aux input but lets you connect two sources. This amp features two separate right and left RCA stereo signal level (pre-amplified) inputs as well as a single speaker level (amplified) which can be either line 1 or line 2 input. You can use the speaker level input as well for one of the sources. If you only have a 3.5mm (like a headphone jack), you can use an RCA to mini adapter like our OSD-MS-6ft. The AMP200 features a signal line out in case you need to connect another amp or receiver and use the same source. TL/CL -1507
Sunday • 12/17/2019, 2:17:43 PM Q Does this amp have an aux output or how can I connect it to a music source?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Sunday, The AMP200 lets you have 2 sources, if you need to you can use the Speaker level input as well for one of the sources. The AMP200 features automatic source switching between Line 1 and Line 2 with Line 1 taking the priority. If you only have a 3.5mm (like a headphone jack) you can use an RCA to mini adapter like our OSD-MS-6ft. The AMP200 features a signal line out in case you need to connect another amp or receiver and use the same source.
paul • 12/17/2019, 2:17:43 PM Q Does this have to be used as a whole home audio system, or can i hook it up to my TV and use it for a home theater system?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Paul, You should be looking at a basic 5.1 surround sound system receiver. The AMP200 is 2 channel amplifier that you would use if you picked out a AV receiver with a second zone output with the intention of expanding your system to multiple zones while using the AV receiver for your central source. TL/MA - 1585
Filipe • 12/17/2019, 2:17:43 PM Q Could I plug a subwoofer into this amp?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Filipe, You can connect a powered sub to the AMP200 using the Line 2 output via RCA cables. (NOTE: Line 2 output only affects what is connected to Line 2 input/ If you want to use both Line 1 & 2 you must use the Hi-level output for the sub to work for both ) If your sub is passive (non-powered), this amplifier will not drive it without a built-in crossover; for example, our OMSUB200 outdoor omni sub includes a built-in crossover. If you are looking for a sub amp, we recommend our SMP250 CL/MA 1660