Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AMP200 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200


Purchase 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200
  • SKU: OSD-AMP200 high-power-stereo-amplifier

    2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

  • $299.99

    Compare at: $399.99 You Save $100.00

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

A team OSD favorite, the AMP200 is a high current 2-channel amp with loads of features. This amp lets you home run (directly to the back of the amp) two pairs of speakers or 4 speakers total. Since it's high current, you can add up to 4 pairs of speakers (8 speakers total) by adding OSD speakers selectors such as the DSM4. Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching circuit. When you connect two independent sources number (say your iPod and a TV in another room) source one takes priority when it is active. When source one is turned off, source number two comes on. Note: You cannot play two sources simultaneously. For this feature you need a multi-channel amp like our MX1260. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

High Performance, High Current Power 
Rated at 80 watts per channel at 8 ohms, and stable down to 2 ohms, the OSD-AMP200 is overload stable so it's ideal for use anywhere clean power is needed. It also includes a dual source switching automatic circuit. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls. 

AMP200 offers 80 watts RMS per channel of power, with bridgeable outputs for up to 250 watts RMS. A, B, or A+B speaker selector switches make managing connected outputs easy. And a signal-sensing power on feature lets the amp power up automatically when you power on your source. 

Automatic Source Switching 
The AMP200 can automatically switch between connected sources, thanks to a priority signal-sensing feature. So if you have your iPod connected to input 2, then decide you want to watch a movie, when the DVD player connected to the main input 1 is turned on, the AMP120 will automatically switch to that source. 

A variable delay control lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds, so things like gaps between CD tracks won't accidentally switch your inputs. 

Works with Smartphones, iPods, and Other Portable Devices 
Use the AMP200 to connect your Smartphone or other portable music device (as long as you have a headphone jack.) The AMP200 includes two RCA signal level inputs marked as red for right and white for left. Using an RCA-to-mini stereo cable (sold separately), plug the 3.5mm stereo connector into the headphone output of your iPod or other portable device, then connect the RCAs to one of the inputs of the AMP200.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Design Type: Class A/B
  • Peak Power Output: 200 Watts per channel
  • Maximum 8 ohm stereo output power at less than 0.2% THD+N: 80W
  • Maximum 4 ohm stereo output power at less than 0.2% THD+N: 125W
  • Maximum 8 ohm Bridged-Mono output power at less than 0.2% THD+N: 250W
  • Frequency Response: (20Hz to 20kHz) +0.0dB, -0.5dB
  • Impedance: 8 ohm to 2 ohm stable
  • Signal to Noise Ratio: -103dB referred to rated power at 4 ohms
  • Turn on options: maunal on, signal sensing, and 12V Trigger mode
  • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
  • Input and Output Terminals: Interrupting line input, main input/output, 12V trigger, speaker zone A output, speaker zone B output, RCA input (4 total)
  • Rack Mountable? Yes
  • Dual Source Switching? Yes
  • Dimensions (W x H x D): 16.5" x 3.5" x 13.5"
  • Weight: 30 Lbs
  • Warranty: 2 years
129 Questions asked on 2-Channel 125W Per Channel, High Current Class A/B Stereo Amplifier Toroidal Transformers - AMP200

steve • 12/17/2019, 2:17:43 PM Q Can you run both A and B speaker selection at the same time
Customer Service • 12/17/2019, 2:17:43 PM
A Steve, The Amp200 is a very popular, high current amplifier- and you can definitely run both A and B at the same time. CL
Steve Svrcek • 12/17/2019, 2:17:43 PM Q Hi, Question on the Shipping Calculations. Shipping quote came up vai snail mail at 112.70 to Calgary , Alberta , Canada, T2E2G2. Thats correct ? and this is new in the box? Thanks For Your Time Steve
Customer Service • 12/17/2019, 2:17:43 PM
A Steve, Our most economical method to Canada is USPS priority international. This would be a brand new amp in the box, yes. CL
Steve Svrcek • 12/17/2019, 2:17:43 PM Q Hi again Question #3. Will this amp200 be stable running 4 butt kickers that are 4 ohms each. Thanks Again Steve
Customer Service • 12/17/2019, 2:17:43 PM
A Steve, Based upon your application, driving 4 butt kickers, you should get the SMP250 our High Current Dedicated Subwoofer Amplifier which features a high cut filter. According to the butt kicker diagram online, you will be able to connect these speakers in series- parallel. CL
Steve Svrcek • 12/17/2019, 2:17:43 PM Q Hi CL We are using as seat shakers for two chairs, the Clark Synthsis Silver TST239 75 watt @4 ohms Transducers as one pair and want to add 2 more chairs with Aura AST-2B-4 50 watt @ 4ohms Transducer Pro Bass Shakers as the other pair. Both sets recommend an amplifier stable at 4 ohms. I have a small Audiosource AMP100 A/B switching 2 channel amp running the Clarks right now but, works great, but you can't run A and B at the same time . I was hopping yours would operate just fine Thanks Steve PS The shipping quote sounds fine. Its understandable when you have to cross that 49th parallel Thanks Steve
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Steve: The AudioSource AMP100 is similar to our AMP120, You can push both A and B in at the same time but it is not recommended. These are both Chip Amps that play only 8 ohm for any length of time. Both the SMP250 and AMP200 are in fact High Current Amplifier featuring large Toradial Power Supplies and ample internal heatsink. Output devices are Bo-Polar Fully discrete. The AMP200 will drop down to 2 ohm. The SMP250 which is bridged Mono will do 4 ohm. I hope that helps... CL
Jon • 12/17/2019, 2:17:43 PM Q I have a Denon AVR 2112CI powering a 5.1 set up. I have 2 sets of outdoor speakers... one on the deck and one on the patio. Currently both sets of speakers are being powered by the surround channels on the Dennon, but I am not getting enough volume without kickup up the db output to Zone 2. Is this the right amp to power BOTH sets of outdoor speakers at the same time? Can I get away with the AMP 120? Please advise and thanks.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Jon, The unit is a perfect fit for your application. Our high current AMP200 will drive two pairs of speakers simultaneously. CL/MA 745