Features
- Eliminates power loss between amplifiers and speakers
- Allows longer speaker runs on large indoor installations
- Includes 100V primary amplifier input and 8 and 4-ohms secondary speaker output
- Easily connects between the speaker and amplifier
- Includes 100W, 80W, 60W, 40W and 20W taps
- Works with audio and PA amplifiers
- Includes self-adhesive pad
Our OSD Black BK-100W70T line matching
indoor audio transformer allows you to convert OSD Audio, 8-ohm speakers, into
high-power 70V line speakers. With taps at 20, 40, 60, 80, and 100 Watts,
integrators can deliver high wattage to 8-ohm speakers up to 2000 feet away
using 14 AWG speaker wire with minimum loss. This is an ideal solution for
commercial jobs where distance is an issue, and there is a wide array of 8-ohm
speakers. Offering a full range frequency response at 20Hz to 20kHz (plus-minus
1dB) with no insertion loss or effect on sound quality, the BK-10070T’s taps allow different
power levels and volumes for each speaker. The more power you have, set
the taps higher. The less power you have, set your taps lower for a truly
customized distributed audio system that won’t overload the amp. Six-inch cable
leads give you plenty of room to work around, and the BK-100W70T includes a self-adhesive
pad for quick and easy installation.
Warning: California's Proposition 65
Warning: This product can expose you to chemicals including Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Specifications
- Primary Voltage: 70V
- Power Rating: 100W
- Primary Taps: 100, 80, 60, 40, 20W
- Secondary Impedance: 8, 4 ohms
- Insertion Loss: 1dB
- Freq Response: 20Hz - 20kHz ± 1 dB
- Mounting Dim: 3.94"W x 2.76"0 x 2.76"H
View Owner's Manual