SKU: OSD-TSM-484
LCD/LED/ Plasma TV Mount Tilt & Swivel 37"-70" - OSD-TSM-484
Even the biggest of big screens can be mounted so you can get that behemoth beauty off the credenza and on the wall. For larger LCD or plasma sets from 37" all the way up to 70", the TSM-484 can be mounted on the wall, over a fireplace and it's even corner friendly. The unit has a remarkably low profile, less than 5 inches when retracted, and can extend over 20 inches. It also tilts 15 degrees up and down and offers 120 pan and swivel. The built-in bubble is a nice touch so you won't drive yourself crazy wondering if it's straight. Like all our mounts, the ratings mean it will fit the mounting holes of your particular set.
Warning: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight of all attached equipment and hardware. We will not be held liable for the improper use or installation of these products.
Warning: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight of all attached equipment and hardware. We will not be held liable for the improper use or installation of these products.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Screen Size: 37" - 70"
- Max Support Weight: 132lbs
- Profile: 4.92" - 20.27"
- Tilt: 15 degrees up and down
- Pan/Swivel: 120 degrees
- Mount Pattern: VESA 800 x 400
- Corner Mountable
- Limited Lifetime Warranty
- Shipping Weight: 24.80 lbs
4 Questions asked
Have a Questions?
What's on your mind?
Darius Shayegan • 12/17/2019, 2:17:43 PM Hi, Do the arms get attached to the TV set, and then "Slide" onto the horizontal bar that's attached to the mount itself? I ask because we want to know if its easy to slide the TV off the mount without unbolting anything. TV is only 33 lbs so want to take it off and bring it inside after use. Thanks!
Customer Service • 12/17/2019, 2:17:43 PM
HI Darius:
Yes the two arms attach to the back of the TV and slide onto the horizontal bar. And can be removed easily. There is a set screw on the back side of the arm that can be tightened to hold the arms to the horizontal bar that secures the arms to the bar. Then just unscrew to loosen the arms so the TV can be lifted off the bar and taken in as you described for your application.
TL/3964
Jason • 12/17/2019, 2:17:43 PM Can you use this mount for outdoor use?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jason:
This mount will work fine in certain outdoor applications. I would not recommend it for mounting in an area where it is exposed to direct weather elements. It should work fine in covered outdoor patios, porches or other outdoor enclosed structures.
There is another choice that might work better that is an Elegant Lightweight Aluminum Design, the OSD TSM-19-464X LED/LCD/Plasma Tilt & Swivel Mount 32" - 70". The Aluminum would be more weather resistant than the powder coated steel. There are 6 different models in the TSM-19 series, just depends on your TV size
TL/4001
Cody • 12/17/2019, 2:17:43 PM Will this support a curved TV?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Cody:
If it is an early version of the Curved TV you may have issues with both our mounts and the competition. Manufacturers did not follow the universal VESA spec needed to match the TV mount to the hole patterns of the Curved TVs. The newest TV, that problem has been solved. Check with the manufacturer of your TV you are looking at and check for VESA rating. Note the Curved TVs tend to protrude out more from the wall but make such a difference in picture quality it is more than acceptable.
TL/4210
Jack Sirak • 11/08/2021, 11:47:13 AM I already have the TSM-484 in place from an old Toshiba. Can I use it for the Sony A80J 55 Inch TV: BRAVIA XR OLED 4K Ultra HD TV
Customer Service • 11/09/2021, 5:04:26 PM
Hi Jack:
The TSM-484 will work perfect with your SONY 55 inch:
Screen Size: 37" - 70" (SONY: 55")
Max Support Weight: 132lbs (SONY 39lbs.)
Profile: 4.92" - 20.27"
Tilt: 15 degrees up and down
Pan/Swivel: 120 degrees
Mount Pattern: VESA 800 x 400 (SONY 300x 300)
The TSM-848 Meets or beats the three top specs; Weight, Screen Size, and VESA rating.
TimL/11-8-2021