Filters

Secure Checkout
Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-6-ZONE-KIT 6 Zone Multi-Room Audio System w/ Amplifier, Speaker Selector, and (6) In-Wall Volume Controls


6 Zone Multi-Room Audio System w/ Amplifier, Speaker Selector, and (6) In-Wall Volume Controls
Purchase 6 Zone Multi-Room Audio System w/ Amplifier, Speaker Selector, and (6) In-Wall Volume Controls
  • SKU: OSD-6-ZONE-KIT 6-zone-multiroom-audio-bundle

    6 Zone Multi-Room Audio System w/ Amplifier, Speaker Selector, and (6) In-Wall Volume Controls

  • $572.99

    In Stock
  • Free Shipping over $50
    30 Day trial
    Lifetime Tech Support
If you're wondering how to set up multi-room audio, it's easier than you think. We take the guesswork out of picking some of the basics for a multi-zone setup. This 6-zone audio system from OSD Audio lets you separately control music in 6 different rooms, and the audio quality is pristine and beautiful. You can fill your entire home with rich-sounding audio that includes a high current amplifier, volume controls and a speaker selector. With this multi-room stereo system, all you'll need to do is select the best speakers for each room and run the wires. Outdoor Speaker Depot is your premiere source for home entertainment systems and audiophile audio systems, and we're here to answer any questions you have.

When you choose your speakers, keep these simple rules in mind. For rooms that are 150 square feet or less, 5.25" speakers are a good size. Select 6.5" speakers for rooms that are 200 square feet and larger, and 8" speakers for rooms that are bigger than 400 square feet. As for speaker style, Contractor and Custom series speakers are good for background music. For stronger bass and louder sound, see our High Definition series. The Kevlar series speakers have the best overall sound that's ideal for a home theater and audiophile tastes. In the Trimless series, the speakers are designed to blend into your decor.

Included in this kit:

AMP300 2-Channel Amplifier

A solid high-power amplifier does more than make the sound you love louder. A well-built power amp cleans up sound quality, improves bass response and delivers the right amount of power to efficiently drive multiple speakers in distributed audio system or home theater. Our AMP300 is a flagship amp that sells well for a reason. This 350-Watt A/B two-channel dual source amplifier is ideal for use as a remote amplifier to power your whole house audio system or as a single amp for a dedicated home theater or media room, and you won’t find an amp with the same features that we pack in at such an affordable price. It is stable at 2 ohm load.

Features:
• Ideal for powering whole-house audio system or dedicated home theaters
• Equipped with 350 Watts per channel peak power, 470 watts Bridged Mono into 8 ohms
• Dual source capable for greater listening flexibility
• Clean, brushed metal front panel with a volume control, power on/off button and balance control
• Protection circuitry safeguards the amp from a short circuit
• Can be configured as bridged or stereo amp

Dual Source Switching
The AMP300 also includes dual source switching to connect two audio sources and toggle between them for greater listening flexibility. Automatic source switching switches between connected sources with a priority signal-sensing feature, so if a DVD player is connected to input 2, then you decide to stream a movie through a game console, when the console is turned on, the AMP300 automatically switches to that source. The AMP300 also includes a variable delay control that lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds. This prevents gaps between music tracks from accidentally switching your inputs. This high power amplifier includes two RCA signal level inputs so with the addition of an RCA-to-mini stereo cable (sold separately), you can connect your smartphone or other device.

Plenty of Power for the Price 
Pair our AMP300 with the power-hungry speakers, and the sound quality will transform your listening experience. Rated at 350 Watts per channel peak power (470 Watts Bridged Mono into 8 ohms), the AMP300 can be configured as bridged or stereo. In bridged mode, you can combine the left and right channels into one audio channel which bumps up the power to a whopping 470 Watts (8 ohms). When playing dual sources, switch to stereo mode which reduces the power to 350 Watts per channel. It is the only high current 2 ohm load stable amp in the market.

Price-defying Features
The AMP 300 also includes two sets of speaker outputs with front panel controls, auto-on signal sensing or 12-volt trigger, rear panel master level controls, dual line-level inputs with priority override switching and dual voltage of 110V/220V and auto signal sensing. This amp has a clean, brushed metal front panel with a volume control, power on and off button and a balance control knob to adjust the balance between the left and right channels and dial in just the right sound level mix. Special protection circuitry safeguards the amp from a short circuit.

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
6-Zone Speaker Selector

The ISS6 High Power Speaker Selector is an easy and effective way to distribute music to up to six listening zones (six pairs of speakers) and play any pair, a combination of pairs, or all pairs simultaneously. Easy to connect with a low-profile design that easily fits into a cabinet or equipment rack.n choose. Front-panel push buttons let you quickly turn each pair of speakers on or off independently, and die cut labels fit within the recessed area on the buttons for easy labeling of each zone. A passive device that does not require power to operate, the ISS6 also includes impedance-matching circuitry so you can safely drive all six pairs at once without damaging your receiver or amp. Designed with quality in mind, the ISS6 is constructed of 16-gauge steel with a durable black powder coating and gray silk-screening.

Features
  • Distributes audio from a receiver or amp to multiple pairs of speakers
  • Send one signal to up to six pairs of speakers in different listening zones
  • Impedance protection allows a single amplifier to safely power multiple speakers
  • Removable input/output connectors allow easy cable termination
  • Includes on/off switches for each zone
  • Low profile with beautiful black brushed aluminum finish
  • Works with any amplifier or receiver
  • Includes a two-year warranty

Upgraded Input/Output Connectors
The ISS6 is easy to install (even for non-technical types) and accepts up to 14-gauge cable. The European-style input/output connectors are removable, which gives you better leverage when terminating cable than traditional spring-loaded terminals. This speaker selector takes either four or two conductor speaker wire stripped at the ends that are inserted into the screw-down input/output terminals for a tight fit to ensure the best signal transmission and sound quality possible.

Protecting Valuable Audio Equipment with Impedance Protection
When connecting multiple speakers to a receiver or amplifier, you need to stay above the amp’s minimum load requirements. Going below the impedance rating can overheat or even damage expensive equipment. The ISS6 includes selectable impedance matching protection circuitry that allows a single amplifier to safely power several pairs of speakers. The speaker selector handles 140 watts per channel total input power without the manual protection engaged and 70 watts per channel with the protection engaged.

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
100W In-wall Volume Control

OSD Audio’s SVC100 is an impedance-matching volume control that lets you adjust the volume of a pair of speakers independently of other speakers within a whole house audio system. Ideal for areas such dining or conference rooms where you may want softer volumes or for saunas or garages where you may want higher volumes, the SVC100 maintains the full hi-fi audio frequency response with no low frequency roll-off. Equipped with the same features of volume controls that cost twice as much, the SCV100 is rated at 100 Watts peak and includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously. The impedance-matching feature helps stabilize the ohm load going back to the amp or receiver to avoid overheating and damaging expensive equipment. A complete volume control kit that fits into a standard single-gang box, the SVC100 also includes the junction box, screws and assorted color trim plates (white, ivory and almond) so you can choose the color that best matches the room. This versatile whole house volume control is compatible with almost any dedicated audio zone or whole house system, and the 12-step rotary knob adjusts the volume from inaudible to loud and everything in between.

Features:
  • Decora style impedance-matching volume control for whole house audio systems and dedicated audio zones
  • Rated at 100 Watts per channel with minimal bass roll-off
  • Impedance-matching feature stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier
  • Front-mounted adjustable jumpers allow easy adjustment when multiple pairs of speakers are connected to a single receiver or amplifier
  • Accepts up to 14-gauge wiring and fits in a standard gang box with a depth of 2.9”
  • Includes junction box and screws as well as white, ivory and almond trim plates to match any room décor
  • Precision electronics provide low distortion and a ruler flat frequency response
  • 12-step linear rotary-style knob for a wide range of listening volumes
  • Installs easily and works with almost any audio system
What Is Impedance Protection?
Speakers are specified by impedance, which is a measurement of resistance to alternating current, and a common value for speakers is 8 ohms. When you’re connecting multiple speakers to a receiver or amplifier, you need to stay above the amp’s minimum load requirements because going below the impedance rating can overheat or even damage expensive equipment. The SVC100 allows you to match the impedance with the number of speakers being controlled with the capabilities of your amp. A basic multi-room system will typically have an amplifier/receiver, a speaker selector, four to eight pairs of speakers, and volume controls. Impedance-matching volume controls feature three settings depending on how many speakers you are connecting. For one to two pairs of 8-ohm speakers, the setting is 1/2x; for three or four pairs of 8 ohm speakers, the setting is 4X. Keep in mind that volume controls do not add gain (volume) to your speakers but simply attenuate the volume up or down. During setup, you'll set the source volume to its optimum level, then the volume control turns the sound down to inaudible levels.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Amplifier
  • Amplifier Type: Stereo
  • Amplifier Class: High Current Class A/B
  • Channels: 2; Speakers A, B or A&B Output
  • Power Handling: 75W(RMS)/ 150W(MAX) Per Channel @ 8 Ohm
  • Power Handling: 225W(RMS)/ 450W(MAX) Per Channel @ 4 Ohm
  • Bridged Rating (Watts): 470W @ 8 Ohms
  • Impedance: 8 Ohm to 2 Ohm Stable
  • Frequency Response: 20Hz-20kHz ±0.5 dB
  • Signal to Noise Ratio: -103 dB Referred to Rated Power @ 4 Ohms
  • 12V Trigger Mode
  • Inputs: Dual Source with Priority / Speaker-In
  • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
  • Rack Mountable: Needs Rack Shelf
  • Dimensions (L x H x D): 16.5" x 5.2" x 13.7"
  • Weight: 35 lbs
  • Warranty: 2 Years

Speaker Selector
  • Speaker Selector Type: 6 Zone Single Source Speaker Selector
  • # of Zones or Speaker Pairs: 6
  • Single Source
  • Power Handling: 140W Per Channel
  • Input Source: Single Amplifier or Receiver
  • Speaker Impedance: 8 Ohms
  • Impedance Protection: Yes
  • Input/ Output Connector Type: Spring-loaded Guillotine-style Push Terminals
  • Removable Input/ Output Connectors Allow Easy Cable Termination
  • Wiring Requirement: Up to 14 Gauge Wire
  • Includes On/ Off Switches for Each Zone
  • Dimensions (L x H x D): 17" x 1.75" x 4.5"
  • Weight: 4 lbs
  • Warranty: 2 Years

In-Wall Volume Control
  • Volume Control Type: 100W Impedance Matching Rotary Knob Style
  • Power Handling: 100W Peak; 50W RMS Per Channel
  • Frequency Response: 20Hz - 20kHz
  • Total Attenuation: 52 dB (Max)
  • Steps: 12 (Make Before Break)
  • Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers
  • *Can be Used as Non-Impedance Matching if Leaving Default on Jumper Setting at 1X
  • Wiring Requirement: Up to 14 Gauge Wire
  • Removable Input and Output "Quick Connect" Phoenix Connectors
  • Fits in a Standard Single Gang Box - See LV1 for Mounting Bracket
  • Unit Dimensions: (L x H x D) 1.62" x 2.5" x 2.5"
  • What's Included: White, Ivory and Almond Plates, Inserts, Screws, and Knob
  • Warranty: 5 Years

No Questions asked yet!