Product Search

    Secure Checkout
    Your Shopping Cart Is Empty

    Secure Checkout


    OSD ICE600WRS6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair

    Purchase 6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS
    • Outdoor Speaker Depot SKU: OSD-ICE600WRS outdoor-in-ceiling-speakers
    • In Stock


    • FREE Delivery by ,
      Order within hours and minutes
      Change Shipping Zip ? Free Shipping Over $50
      More Delivery Options

    Lifetime Tech Support


    Lifetime Tech Support

    Relax in the tub and enjoy beautiful sound with these water-resistant 6.5" in-ceiling speakers! With 150W power handling, these in-ceiling speakers are the solution to bringing quality audio to high moisture areas, and are constructed of durable, moisture-resistant materials for use in high-humidity areas such as bathrooms, laundry rooms, kitchens, under outdoor eaves or covered porches. Sold in pairs, these weather-resistant speakers are also great for covered porches and patios! The aluminum grill cover is rust-resistant for wet application. The ICE600WRS weather-resistant in-ceiling speaker pair works well with a CL3 in-wall rated speaker wire, which is designed to run inside walls.

    Pivoting Tweeter
    The job of the tweeter is to deliver the higher frequencies of music and soundtracks. The tweeter is also adjustable, meaning it can be aimed toward the listening area. This can make a big difference in sound quality especially for dialog and higher frequencies.

    How Does this Speaker Mount in the Ceiling?
    Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.

    What Type of Speaker Wire and What Gauge?
    Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

    Testing the Sound Quality of In-Ceiling Speakers
    Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.

    For a retrofit installation, no construction bracket is needed.

    Warning: California's Proposition 65


    This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to

    • Speaker Type: 6.5" Weather Resistant Indoor/Outdoor Ceiling Speaker
    • Woofer: 6.5" Polypropylene Cone with Santoprene Surround
    • Tweeter: 1" Pivoting Polycarbonate Dome
    • Frequency Response: 48Hz-20kHz
    • Power Handling: 150W
    • Sensitivity: 90 dB
    • Impedance: 8 Ohms
    • Weather-resistant for High Moisture Situations
    • Perfect for Outdoor or Indoor Use
    • Inputs: Spring Loaded Binding Posts
    • Install-friendly Dog Ear Installation Brackets
    • See New Construction Brackets For Compatibility
    • Diameter & Depth: 9.06" x 4.33"
    • Cutout Diameter: 7.95"
    • Sold As: Pair
    • Warranty: 10 Years
    44 Questions asked
    Have a Questions?

    What's on your mind?

    Trey • 12/17/2019, 2:17:43 PM I am looking to set up a 4 zone system, with the AMP200 and DSM4 speaker selector. Is it OK to have volume controls on 3 of the zones but not on the 4th? The 4th zone does not have a good place to wire volume control so I would like to leave it out if possible.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Trey, It is better to have volume controls for each zone, so our suggestion for your fourth zone is connect that pair to the speaker B output on the Amp200 rather than zone 4 on the speaker selector. CL 1324
    kurt brendon • 12/17/2019, 2:17:43 PM Whats the impedance of this speaker?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Kurt, That would be 8ohms Cl 1349
    kurt brendon • 12/17/2019, 2:17:43 PM Whats the impedance of this speaker?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Kurt, That would be 8ohms Cl 1349
    Rick • 12/17/2019, 2:17:43 PM I am replacing four in wall speakers after 16 years. the cut out hole is 8 X 51/2. They will function and the front and rear surround speakers. I have an old JBL center speaker that works fine. Do you have any recommendations. Thanks Rick
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Rick: Your cutout hole would tell us that you are replacing 5.25" In-Wall Speakers. Our best 5.25" In-Wall would be the IW540 but the Cut-Out Diameter is 9 5/8" x 6 1/8". It would help to know the JBL center Channel model number so I can see the specifications. Is it a Dual 5.25" with a 1" Tweeter; what is the cone material used for both the woofer and Tweeter? That will also help to pick out the best timbre matched speakers to compliment the JBL Center. Also do you have the ability to enlarge the hole size to accommodate a 6.5 inch 2 way typically with a Cutout of 7 5/8" x 10 13/16". You have more choices in 6.5" and matches better to a Dual 5.25" Center (if that is what your JBL speaker is). Please let us know what you think. TL #1409
    Andy • 12/17/2019, 2:17:43 PM Does this model have a pivoting tweeter? Thanks!
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Andy, The tweeters on the ICE600WRS are stationary and do not pivot. The internal components are sealed for humidity so these speakers are ideal for bathrooms or covered patios. CL/MA 1690