Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-ICE600WRS 6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS


Purchase 6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS
  • SKU: OSD-ICE600WRS outdoor-in-ceiling-speakers

    6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS

  • $69.99

    Compare at: $99.95 You Save $29.96

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

Relax in the tub and enjoy beautiful sound with these water-resistant 6.5" in-ceiling speakers! With 150W power handling, these in-ceiling speakers are the solution to bringing quality audio to high moisture areas, and are constructed of durable, moisture-resistant materials for use in high-humidity areas such as bathrooms, laundry rooms, kitchens, under outdoor eaves or covered porches. Sold in pairs, these weather-resistant speakers are also great for covered porches and patios! The aluminum grill cover is rust-resistant for wet application. The ICE600WRS weather-resistant in-ceiling speaker pair works well with a CL3 in-wall rated speaker wire, which is designed to run inside walls.

Pivoting Tweeter
The job of the tweeter is to deliver the higher frequencies of music and soundtracks. The tweeter is also adjustable, meaning it can be aimed toward the listening area. This can make a big difference in sound quality especially for dialog and higher frequencies.

How Does this Speaker Mount in the Ceiling?
Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.

What Type of Speaker Wire and What Gauge?
Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

Testing the Sound Quality of In-Ceiling Speakers
Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.

For a retrofit installation, no construction bracket is needed.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Speaker Type: 6.5" Weather Resistant Indoor/Outdoor Ceiling Speaker
  • Woofer: 6.5" Polypropylene Cone with Santoprene Surround
  • Tweeter: 1" Pivoting Polycarbonate Dome
  • Frequency Response: 48Hz-20kHz
  • Power Handling: 150W
  • Sensitivity: 90 dB
  • Impedance: 8 Ohms
  • Weather-resistant for High Moisture Situations
  • Perfect for Outdoor or Indoor Use
  • Inputs: Spring Loaded Binding Posts
  • Install-friendly Dog Ear Installation Brackets
  • See New Construction Brackets For Compatibility
  • Diameter & Depth: 9" x 3.5"
  • Cutout Diameter: 7.75"
  • Sold As: Pair
  • Warranty: 10 Years
43 Questions asked on 6.5" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE600WRS

Barry • 12/17/2019, 2:17:43 PM Q Thinking of putting 2 pair in my garage ceiling. It is a 25x25. Will these 6.5" work good or do I need the 8"?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Barry: If you have the room the 8 inch will provide a little more bass than the 6.5" I would recommend roughly 10 feet apart and lay the speakers out Left and Right in the front and Right and Left in the back. Good Luck TL/3996
Sam • 12/17/2019, 2:17:43 PM Q Hi, in your item pictures, you have these speakers mounted in soffit. Do you need a bracket to hold them or will soffit be strong enough for them to just clap onto?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Sam: The ICE 600 WRS does not need a pre-construction bracket to make it work mounted to a soffit. The dog ears work up to a depth of 1.25" so should work for you. TL/4021
Kyle Reid • 12/17/2019, 2:17:43 PM Q I'm building an outdoor kitchen/bar and would like to mount these on the front of the bar right under the overhang of the countertop. A blowing rain could possibly hit the speaker. Could these speakers withstand that?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Kyle: These are in-ceiling speakers meant to be mounted to a surface with a dedicated enclosed area behind it. Otherwise we would recommend a patio speaker with a sealed enclosure like our AP525 (5.25" 2 way) or the AP650 (6.5" 2 way). If you are mounting into a surface with the enclosure than the ICE-600 WRS will work for your application. The AP patio speakers will work in any application. TL/4183
Dean • 12/17/2019, 2:17:43 PM Q Can you use Cat-5 to wire these for sound directly to/from your computer?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Dean: Most computers need powered speakers to connect to. You can add an amplifier like out XMP 100 and wire speaker wire like our CL3/FT4 rated in-wall, outdoor and direct burial wire from the amplifier. Then connect your computer/laptop with a 3.5mm to RCA adaptor cable connected to the Headphone or audio jack of the computer/laptop. Then you can power up to two pair of speakers maybe one indoor and a second pair at you computer. There are A or B speaker buttons that can be pushed in at the same time to play both speakers at once. The XMP 100 is a digital amplifier that runs at 93% efficiency. TL/4335
Neil • 12/17/2019, 2:17:43 PM Q I would like to install these speakers in soffits on my patio. The roof line for this soffit is a flat roof, so it is straight across. There is also a gutter in front of the soffit. Will these speakers be able to withstand the weather?
Customer Service • 12/17/2019, 2:17:43 PM
A HI Neil: Yes they will work, these were designed just for this type of application. The ICE 800 WRS will give you a little more bass if you have the room. TL/4409