Filters

Secure Checkout
SAME DAY SHIPPING IF ORDERED BEFORE 2PM PST + Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-ICE800WRS 8" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE800WRS


Purchase 8" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE800WRS
  • SKU: OSD-ICE800WRS weather-proof-ceiling-speakers

    8" Weather-Resistant 150W Outdoor/Indoor In-Ceiling Speaker Pair - ICE800WRS

  • $67.46

    Compare at: $100.99 You Save $33.53

    In Stock
    FREE Delivery by ,
    If ordered within hours and minutes
    Not Shipping to ?
    More Delivery Options

Calculate Shipping

Guarantee

Lifetime Tech Support

This 8-inch in-ceiling, weather-resistant speaker pair is ideal for high-humidity areas, including outdoor patios, bathrooms, laundry rooms, and covered porches! With high power handling and an 8-inch polypropylene woofer in each, these speakers deliver superior sound that covers large spaces. With swivel tweeter adjustment, you can easily create sweet spot for your listening area. Better crossover, tweeter and woofer materials add sound quality. The aluminum grill cover is rust-resistant for wet application.These weather-resistant indoor/ outdoor in-ceiling speakers work well with a CL3 in-wall rated speaker wire, which is designed to run inside walls.

Pivoting Tweeter
The job of the tweeter is to deliver the higher frequencies of music and soundtracks. The tweeter is also adjustable, meaning it can be aimed toward the listening area. This can make a big difference in sound quality especially for dialog and higher frequencies.

How Does this Speaker Mount in the Ceiling?
Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.

What Type of Speaker Wire and What Gauge?
Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

Testing the Sound Quality of In-Ceiling Speakers
Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.

For a retrofit installation, no construction bracket is needed.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Speaker Type: 8" Weather Resistant Indoor/Outdoor Ceiling Speaker
  • Woofer: 8" Polypropylene Cone with Santoprene Surround
  • Tweeter: 1" Pivoting Polycarbonate Dome
  • Frequency Response: 38Hz-20kHz
  • Power Handling: 150W
  • Sensitivity: 90 dB
  • Impedance: 8 Ohms
  • Weather-resistant for High Moisture Situations
  • Perfect for Outdoor or Indoor Use
  • Spray Paintable Rust-Resistant Aluminum Grille Included
  • Inputs: Spring Loaded Binding Posts
  • Install-friendly Dog Ear Installation Brackets
  • See New Construction Brackets For Compatibility
  • Diameter & Depth: 10.25" x 4.25"
  • Cutout Diameter: 9"
  • Sold As: Pair
  • Warranty: 10 Years
46 Questions asked
Have a Questions?

What's on your mind?


DJ • 12/17/2019, 2:17:43 PM Does this model have a pivoting tweeter?
Customer Service • 12/17/2019, 2:17:43 PM
Hi DJ: Yes most of all of our in-ceiling speakers with a single Tweeter pivot roughly 5 degrees in all directions (360 degrees). Even our angled speakers features tweeters that pivot. All of our In-wall speakers feature Tweeters that swivel 5 degrees as well. TL/3956
Edward Barajas • 12/17/2019, 2:17:43 PM what is the rms rating for the ice800wrs ?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Edward 150 watts RMS, 200 Watts Peak Heavy duty magnet and 90 dB Sensitivity so they are also efficient. TL/3998
Nathaniel • 12/17/2019, 2:17:43 PM What is thr resistance (ohms) for this speaker?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Nathaniel: 8 ohm is the standard for all of our in-ceiling and in-wall speakers. TL/4030
Juan Reynoso • 12/17/2019, 2:17:43 PM I am looking at replacing my current 22 year old ceiling speakers mounted on stucco. I have an 8 1/2" cut out. Does this speaker fit?
Customer Service • 12/17/2019, 2:17:43 PM
Hi: Juan: They will be too big for your cutout hole. These speakers need a cut out hole of 9 5/16". Your cutout hole is 8 1/2". The 6.5" ICE-600 WRS are 7 5/8" and would not work. Do you have the ability to make your cutout hole bigger? There is a cut-out hole template included with each speaker. TL/4044
Edward • 12/17/2019, 2:17:43 PM Hi how many day iT take for dilever iT in a week or more ? Thx
Customer Service • 12/17/2019, 2:17:43 PM
HI Edward: Where do you want the unit sent to? It takes less than a week to ship anywhere in the US. We ship from Brea CA. LA is a major shipping home. TL/4066 tim@osdaudio.com