Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-PS10 10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10


Purchase 10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10
  • SKU: OSD-PS10 10-inch-premium-powered-subwoofer-ps10

    10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10

  • $169.99

    Compare at: $199.95 You Save $29.96

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

The PS10 subwoofer is a free-standing and fully powered 10-inch subwoofer and an excellent addition to any collection. This is an ideal subwoofer for a home theater or a small to medium size room where you wish to have full, powerful sound. Surround yourself with the most realistic sounds and put yourself in the center of the action during any movie, music experience or casual listening with the lower frequency range of this powerful subwoofer. This subwoofer, which covers a 30 Hz to 120 Hz range, features a front firing woofer in dual front firing ports, so you can build it into a custom cabinet. The OSD Audio PS10 high performance home theater subwoofer has speaker level inputs and delivers 200 watts of power. 

Warning: California's Proposition 65

Warning:

 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov


  • Woofer: 10" 
  • Frequency Response: 30Hz to 120Hz 
  • Power Handling: 200W
  • Impedance: 8 Ohms
  • Phase: 0-180°
  • Inputs: L&R / Low Level
  • Sold As: Single
  • Unit Dimensions: (L x H x D) 13.5" x 14" x 15"
  • Weight: 19.5 lbs
15 Questions asked on 10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10

Nick • 12/17/2019, 2:17:43 PM Q In the description of the PS10 you mention it has two front ports that allow you to tuck it into a cabinet. That appears to be for the older design. The images of the newer design show a single, rear port. Does this mean it's no longer suitable for placement in a cabinet? Also, what is the RMS power of the amplifier?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Nick: You are correct the dual front firing port was specifically designed for placing in a cabinet. The current PS-10 will work in a cabinet but will sound different with the rear firing port coupling inside the cabinet. You still have the active front firing driver doing the bulk of the work. We have a 30 day performance guarantee so you can buy it and try it. You can also make some adjustments like stuffing some fiber fill into the port. That will make it thinks it is working in a larger enclosure. And if it does not sound exactly as you want it you can return for full refund. Just remember to keep all the packing material in case you end up returning the sub. TL/4578
Reginald • 12/17/2019, 2:17:43 PM Q I have a Sony STR-DH550 Multi Channel AV Receiver. Will this PS10" be compatible to my unit?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Reginald: The PS10 would be perfect for your application. If connecting directly to the sub woofer use a stereo RCA patch cord (with R&L). We do have a a wireless option for your sub as well which features a single RCA input and output. You can connect a single output from your receiver and single input to either the R or L. Or we do sell Y adapters as well. Good luck TL/4797
Tony • 12/17/2019, 2:17:43 PM Q I am setting up a 7.2 setup with one subwoofer front left and one back right. What sort of room size will 2X PS10 cover and when should I move up to PS12s?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Tony: You can never have enough bass, the PS12 will go a little deeper, so if you have the room I step up to the 12. TL/4865
Tom • 12/17/2019, 2:17:43 PM Q I have an older ps 10 with the fins, trying to hookup the audio cable, Im in the las port and the other is hooked to the receiver, but no sound coming out, only a hum and crackle. Is that the right hookup? Tom
Customer Service • 12/17/2019, 2:17:43 PM
A HI Tom: There are two options to connect to the original PS10. The first option is signal (low) level using an RCA cable connected to the Subwoofer output of the Audio Video Reciever. This is a from a preamp output (before it is amplified). This being connected from an AVR that has a dedicated processed signal (usually mono single output) that can connect to either the right or left input or use a y adapter to connect to both. But if you are connecting to a receiver that has no preamp or Subwoofer signal level output but you A and B speaker out on your receiver. You can connect your full range speaker to Speaker A and then connect Speaker B to the Left and right speaker (High) level input on the PS10. This signal will be converted to line level pre-amplified signal then sent to the internal power amp to be amplified and sent to the low pass controls. It sounds like you are connected to the RCA signal level inputs. Make sure your receiver shows the subwoofer outputs are turned on. The receiver may send out test tones as part of the configuration. TL/5006
Jimmy Ton • 12/17/2019, 2:17:43 PM Q Was looking for a budget sub for an office/pc gaming room when i came across this site. Interesting 10" option sub option that appears to be good quality. I noticed there are 2 versions of the PS10 sub. One with a beefier looking amp with metal cooling fins, and the new one without. Any major differences with the amp internals or was it just all aesthetic? The fins seem to help cool the amp according to a review from 2012. Also, is the down firing S10 still available? My house has a raise foundation and wood floor/subfloor. Wouldn't a down firing sub sound better?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Jimmy: The only down-firing subwoofer we have left is the SS8 which is also low profile and can be placed either under a couch or Behind the furniture and wall. Note, our location; Brea California and you can visit our showroom and have them set up a demo. Try before you buy. They may be able to find a couple of B stock S10 or the original PS10 or PS12. The current PS10 and PS12 are at a reduced price already. Just call 562-697-2600 and ask for Sales/Customer Service. TL/5336