Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-PS10 10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10


Purchase 10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10
  • SKU: OSD-PS10 10-inch-premium-powered-subwoofer-ps10

    10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10

  • $169.99

    Compare at: $199.95 You Save $29.96

    In Stock

Calculate Shipping

Guarantee

Lifetime Tech Support

The PS10 subwoofer is a free-standing and fully powered 10-inch subwoofer and an excellent addition to any collection. This is an ideal subwoofer for a home theater or a small to medium size room where you wish to have full, powerful sound. Surround yourself with the most realistic sounds and put yourself in the center of the action during any movie, music experience or casual listening with the lower frequency range of this powerful subwoofer. This subwoofer, which covers a 30 Hz to 120 Hz range, features a front firing woofer in dual front firing ports, so you can build it into a custom cabinet. The OSD Audio PS10 high performance home theater subwoofer has speaker level inputs and delivers 200 watts of power. 

Warning: California's Proposition 65

Warning:

 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov


  • Woofer: 10" 
  • Frequency Response: 30Hz to 120Hz 
  • Power Handling: 200W
  • Impedance: 8 Ohms
  • Phase: 0-180°
  • Inputs: L&R / Low Level
  • Sold As: Single
  • Unit Dimensions: (L x H x D) 13.5" x 14" x 15"
  • Weight: 19.5 lbs
15 Questions asked on 10" High Definition Powered 200W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS10

Nino • 12/17/2019, 2:17:43 PM Q I have a Denon receiver with 2 RCA subwoofer outputs. My PS10 sub only has L and R line input. I am not getting any sound on either input that I plug into. I used a 50 ft. RCA cable.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Nino, What kind of cable are you running from your receiver to the subwoofer and from which output on the receiver?
chris jagielo • 12/17/2019, 2:17:43 PM Q can you pleas help me. I have a Denon receiver with 2 RCA subwoofer outputs. My PS10 sub only has L and R line input. I am not getting any sound on either input that I plug into. I used a 25 foot monster cable.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Chris Which Denon Receiver are you using? Is the PS10 brand new out of the box, or have you actually played muisc before this? You should be able to input either R or L form either output 1 or 2 from your Denon What does the power indicator show, Green for on, or red for stand by? Please let us know... TL/3674
xtian • 12/17/2019, 2:17:43 PM Q Why is this more expensive than your 12"? I am deciding between the two for a 5.1 system. I watch mostly movies and xbox.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Xtian: The PS12 listed on our site is a closeout, once they are gone there will be a new PS12 similar to the new PS-10 replacing it on line. The new PS12 features a rear port like the new PS-10. The original PS12 has a few more features. Note the Speaker level input/output not found on our new version. The PS12 at the price is a great deal. TL/4157
Ram • 12/17/2019, 2:17:43 PM Q I see photos of this sub without the sloping edges on Amazon and the amp has fins. Is that the older version of the sub? If I order now, what version will I get?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Ram: The model with the Fins has been discontinued for more than a year. Your best bet is to order directly from Outdoor Speaker depot which has only the newer version in stock. Make sure you speak with a salesperson who can verify the new PS10. TL/4184
Nathaniel • 12/17/2019, 2:17:43 PM Q I am interested in building a 2 zone indoor/outdoor audio system using the attached equipment. Do I need an Amp as well as an AV receiver to power the system? And.....If the AV Receiver ALONE will do the job....can you recommend one?
Customer Service • 12/17/2019, 2:17:43 PM
A HI Nathaniel: You have two options from us. First would be a combination AMP 200 and our Pre1 Pre amplifier which would basically duplicate a receiver less the AM/FM Tuner. The second choice a more affordable option but still quite good would be our new XMP-100 Digital Amplifier along with the Pre1 pre amplifier as well. In both cases the Amplifiers have speaker A and Speaker B. A could be outdoor and speaker B could be indoor. Also choose Input source #2 for the AMP200 and Main input on the XMP 100. Both inputs feature a dedicated output to connect to your Subwoofer. Then checkout adding either an external WiFi or Bluetooth Receiver or both. You have 4 inputs on the Pre One including a phono pre amp. Checkout the Logitech Bluetooth receiver on line. TL/4211 Note: I believe you submitted a request through our upload your plans feature. My contact info is tim@osdaudio.com if you need further clarification.