Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-PS12 12" High Definition Powered 300W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS12

Purchase 12" High Definition Powered 300W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS12
  • SKU: OSD-PS12 12-inch-premium-powered-subwoofer-ps12

    12" High Definition Powered 300W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS12

  • $199.99

    Compare at: $249.95 You Save $49.96

    In Stock

Calculate Shipping


Lifetime Tech Support

The PS12 subwoofer is a free-standing and fully powered 12-inch subwoofer and an excellent addition to any collection. This is an ideal subwoofer for a home theater or a small to medium size room where you wish to have full, powerful sound. Surround yourself with the most realistic sounds and put yourself in the center of the action during any movie, music experience or casual listening with the lower frequency range of this powerful subwoofer. This subwoofer, which covers a 30 Hz to 120 Hz range, features a front firing woofer in dual front firing ports, so you can build it into a custom cabinet. The OSD Audio PS10 high performance home theater subwoofer has speaker level inputs and delivers 300 watts of power. 

Warning: California's Proposition 65


This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to

  • Woofer: 12" 
  • Frequency Response: 30 to 120Hz
  • Power Handling: 300W
  • Impedance: 8 Ohms
  • Phase: 0-180°
  • Inputs: L&R / Low Level
  • Sold As: Single
  • Unit Dimensions: (L x H x D) 15.5" x 15.5" x 15.5"
  • Weight: 27lbs
  • Warranty: 2 Years
10 Questions asked on 12" High Definition Powered 300W Home Theater Subwoofer Black Wood Veneer, Single Drive - PS12

Paul • 12/17/2019, 2:17:43 PM Q How do I connect my PS12 to the amplifier which does not have an output jack?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Paul: If you are talking about the new PS-12 or even the new PS-10 both of these do not have speaker level inputs so you are restricted to Pre amp or signal level connection. We do have the PS88 (180 Watts, 4 ohm) and both the S-10 and S-12 down firing woofers. These three have Speaker (High ) level inputs. Sorry about that TL/4676
-K- • 12/17/2019, 2:17:43 PM Q 1.. Does the PS12 have any 'chuffing' / Port Noise with medium to high volume with lower note / frequency? I notice with my BIC F12 certain songs WITH constant-consistent low bass there's Chuffing / port noise. I Don't think I'm pushing my BIC F12 over the limit or hard. It's(the sub knob/gain) set passed 12 o'clock around 1 or 2 oclock.. 2.. ALSO, do DUAL PORTS help to minimize port noise? 3.. I've been thinking about getting two of the PS12's to even the bass out in a room. I Notice a dead / low / uneven-spot somewhere near the center of the room. It's been said that dual subs helps with even-bass. and some extra total gain/output when they're combined. -Do you also recommend this?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi K: Good question, I have not heard a lot of feedback regarding Port noise from the PS12 or PS10. I did check out the Video Review of the BIC F12 where the reviewer claimed the output from the BIC was plenty at 2 or 3 (maybe 9:00 O'clock)? So maybe you are over driving it. Certainly there is a technology involved in selecting the port size and location for any bass reflex Subwoofer. So I am assuming that double port design had to do more with the specific box design. Regarding your dead or Null spot in your room may have to do with a combination of room layout and speaker location. A second woofer certainly help address this. Have you experimented with different locations for your single woofer? Have you done the Sub woofer crawl where you place the sub woofer at the optimum listening/viewing location? Then go around the room and stand in the potential locations for the Sub woofer. Find the one that sounds the best and then switch the sub woofer to that location and see if that makes a difference. I would try one PS12 and see how that works in your system. You can easily add a second sub woofer later. We do have a wireless kit that works pretty well eliminating the need to run wires between the Receiver and the Sub. Good luck TL/4678
Patrick Melone • 12/17/2019, 2:17:43 PM Q Can i pick this up in store some where? I need this for christmas!!
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Patrick: I am just reading this question the 24th of DEC. This unit is sold on line directly from us or through AMAZON but shipped from us. We are located in Southern California and this would have taken special shipping to get it to you by Christmas. It says you are in Pennsylvania. We might have been able to get a unit out if you had contacted us directly, hopefully you may have done that or at least found a better alternative locally. Sorry about that TL/4705
mike grandy • 12/17/2019, 2:17:43 PM Q I have a 50'x 40' shop that i was planning on puting your 8" (4) 3 ways in the ceiling and have two cables run for two subs the subs will be next to oposing wall. Front or down firing??
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Mike: Two Front Firing Subs (PS12) would be ideal for your application. Before you permanently run your wires play around with different locations. Typically there will be dead spots when just running one sub so adding a second sub will fill in will help but you will need to experiment. And with the external subs you can find the ideal location before running your wires in the wall. When you say three way speaker are you referring to our ICE1080HD a 10" 3 way? Are you planning wiring as two stereo pairs? What is your Source and Amplification? I can provide additional advice if needed. TL/4812
Greg • 12/17/2019, 2:17:43 PM Q Any idea when the 12? sub will be available?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Greg: Check out the Acoustic 12 from It has identical specs as the PS12 but features a little different cosmetics. We will match the PS12 price. You will need to contact OSD customer service. Tell them Tim Sent you. Other questions; Good luck TL/5374