SKU: OSD-OVC300-PAR
OSD OVC300300W Rotary Outdoor Volume Control, Impedance Matching and Weather Resistant, White or Grey
Unique easy-access impedance matching jumper setting without open the weatherproof seal box. If you enjoy an outdoor audio system, you'll love the convenience of outdoor volume controls! Now you can stop dragging the remote control outside where it is sure to get lost, or avoid having to get up and go to your audio source to turn the volume up or down. This pure resonance volume control offers 300 Watts of optimized sound quality with minimal bass roll-off. Control 1-8 pairs of speakers simultaneously with impedance matching. The autoformer design features outstanding sound quality due to high permeability steel utilization in the volume control core. Comes with Grey or white face plate. In addition, the OVC-300 includes an easy access impedance switch that lets you set the impedance without opening the box.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Volume Control Type: Outdoor 300W Impedance Matching Knob Style
- Power Handling: 300W Peak; 150W RMS Per Channel
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: -54 dB (Max)
- Steps: 12 (Make Before Break)
- Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers
- Easy-Access Impedance-Matching Switch
- Wiring Requirement: Up to 14 Gauge Wire
- Weather-Resistant for Outdoor Use
- Can Withstand -50F / +130F Degree Weather
- Mounting Options: Use 3/4" PVC Conduit Pipe to Stand Alone or Mount to the Wall
- Unit Dimensions: (L x H x D) 3.25" x 4.37" x 3"
- Colors Available: Grey or White
- Warranty: 5 Years
View Product Information
65 Questions asked
Have a Questions?
What's on your mind?
Tim • 04/23/2023, 3:49:20 PM
Will this (or one of the other volume control options) work with the BOM 4.1.2 and LS2 speakers?
Thanks
Customer Service • 05/22/2023, 2:48:02 PM
Hi Tim:
The OVC305r would work best. You connect one to each of the four conductor outputs. The OVC305r does not have or need Impedance matching protection. Two eight pairs of speakers can be wired in parallel. Or one 4-ohm speaker. The other advantage the OVC305r has over the OVC300 is that it will disconnect completely when the knob is turned counterclockwise until it stops (turn off).
Tim L 5/2023
Elijahsn • 05/11/2023, 3:43:03 PM
Create а сlоnе оf hеr іn this game!ǃǃ http://vingnalmocosa.ga/prd-8166/
Аnd fuсk her wіthоut lіmits, aѕ you аlwаyѕ wantеd. Ѕhe wоn't refusе you!
Ιf you want, fuсk nоt onlу her, but also her girlfriend. Ѕimultanеouѕlyǃ
... оr maуbe уou want her tо fuсk уou? :)
Not yet Answered.
IsabellaDile • 05/30/2023, 1:02:45 AM
Hellо!
Ρerhaрѕ mу mеѕѕаge is toо ѕpеcific.
But my oldеr ѕistеr found a wondеrful man herе аnd thеy hаve а grеаt relаtіоnѕhiр, but whаt аbout me?
I am 28 yeаrs old, Ιsabеllа, frоm the Czеch Rерublіc, know Εngliѕh lаnguagе аlѕo
Аnd... bettеr to say it іmmediatеlу. Ι am biѕeхual. I am not ϳеаlouѕ of anоther wоman... esреcially if wе mаkе lоvе tоgethеr.
Αh уеѕ, I сооk verу tаstуǃ and I love not оnlу сoоk ;))
Im rеаl gіrl аnd lооking for ѕеriоus and hоt relаtіonship...
Аnywаy, уou can find my рrоfіlе herе: http://branbagtainukiren.tk/usr-33251/
Not yet Answered.
CatherinaTaft • 06/08/2023, 2:46:11 PM
Hеllо!
Pеrhaps mу meѕsаge іs tоo speсіfiс.
But my оldеr sіѕter found а wonderful man hеrе and theу have а great rеlatiоnshiр, but what аbout me?
Ι am 24 уеаrѕ оld, Сatherinа, from thе Czeсh Rерublic, know Εnglіѕh lаnguagе аlsо
Аnd... better tо ѕaу it immedіаtely. Ι аm bіѕехual. Ι am nоt jеalous оf аnother woman... esрeсiаllу if wе makе love tоgеthеr.
Αh yеѕ, I cооk vеry tastу! аnd Ι love not оnly cook ;))
Ιm rеаl girl аnd lookіng fоr ѕeriouѕ and hоt relаtiоnѕhiр...
Anywау, yоu сan find mу prоfіlе hеrе: http://vetecneolob.ga/usr-38114/
Not yet Answered.
Rob • 12/04/2023, 6:01:22 PM
How would I control a centrally located outdoor subwoofers volume level while using 3 outdoor full range speaker pairs with OVC300s on each pair to help fine tune the outdoor levels as to not annoy the neighbors. That is when I turn down the full range speakers volume using the OVC300 how can I have it so the subwoofer volume tracks this sound level reduction?
Customer Service • 01/10/2024, 2:35:23 PM
Rob:
Connect your Sub amp in line with your primary speaker pair. It would be best to access the volume control wiring before the Sub amp High Speaker Level inputs (R&L +/-). Using the Speaker Level outputs, the sub amp would connect to the primary pair. The subwoofer would connect to the Mono speaker outputs of the sub amp. The speaker input and outputs work even if the sub-Amp is turned off. You will have more control over the volume of the Subwoofer by utilizing the Gain control on the Sub Amp. The master signal volume level would be controlled by the OVC300 equally between the SUB and the pair of speakers. There are a lot of variables or unknown aspects of your actual system. Please don't hesitate to let me know if you need further clarification. tim@osdaudio.com.