SKU: OSD-AP525-PAR
OSD AP5255.25" 2-Way Outdoor Patio Speaker Pair w/ Optional 70V Tap, IP54 Rated, White or Black
The OSD Audio AP525 outdoor patio speakers are a popular choice for those looking for exceptional sound and a sleek, modern design. Made of composite resin with a low resonator cabinet, these speakers offer a great value for their price. These outdoor speakers have a power handling of 150W, frequency response of 38Hz to 20kHz +/- 10dB, sensitivity of 90dB, and gold-plated spring-loaded binding posts. They also feature an IP54 rating, powder coated rust-resistant aluminum grille, and full motion bracket. These speakers are sold as a pair and come in black and white colors. The 70V switchable version is also available for professional installation. These weather-resistant speakers are perfect for mid-sized decks, patios and overhangs.
Features:
- Mounting bracket is designed to mount either vertically or horizontally
- Available with 70V switch for commercial installations
- Gold-plated spring compression binding posts for optimum connectivity
- Sturdy fiberglass reinforced plastic frame
- Powder-coated rust-resistant Aluminum grille
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 5.25" Indoor/ Outdoor Patio Speakers, 70V Optional
- IP54 Rated
- Woofer: 5.25" Water Resistant Treated Paper
- Tweeter: 1" PEI Dome
- Frequency Response: 38Hz to 20kHz +/- 10dB
- Power handling: 150W
- Sensitivity: 90 dB
- Impedance: 8 Ohm w/ Optional 70V Transformer Built-In
- 70V Tap: 32W, 16W, 8W and 4W
- Gold-Plated Spring-Loaded Binding Posts
- Powder Coated Rust Resistant Aluminum Grille
- Full Motion Bracket
- Unit Dimensions: (L x H x D) 10" x 6.5" x 6.5"
- Sold As: Pair
- Colors Available: Black / White
- Weight: 7 lbs Each Speaker
- Warranty: 1 year
View Owner's Manual
41 Questions asked
Have a Questions?
What's on your mind?
Nathan • 12/17/2019, 2:17:43 PM
Hello!
I have a pair of the AP525s but seem to have misplaced the bracket knobs that fix the speaker to the mounting brackets. Any idea what type of screw would work as a replacement (size, pitch, thread count)?
Thanks,
Nate
Customer Service • 12/17/2019, 2:17:43 PM
Hi Nate,
We have the replacement knobs. Simply call or email us at rma@outdoorspeakerdepot.com to inquire about ordering the knobs. Thanks!
-BM
2470
Steve Bachman • 12/17/2019, 2:17:43 PM
I am curious what the "70v" option is on the OSD 525. Thank you
Customer Service • 12/17/2019, 2:17:43 PM
Hi Steve,
This allows you to use the speaker with a 70v commercial system.
Steve Bachman • 12/17/2019, 2:17:43 PM
I am curious what the "70v" option is on the OSD 525. Thank you
Customer Service • 12/17/2019, 2:17:43 PM
it means that they already have the tap switch or that i new to buy a transformer tu use it ?
Zach • 12/17/2019, 2:17:43 PM
I am looking of speakers than I can add a bluetooth adaptor to. Would these be compatible with that? And if they are the adaptor would be plugged into the same place as an amplifier so how well would these speakers work without being connected to an amp?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Zach,
These are passive speakers and need a power source. The BTP-650's are Bluetooth patio speakers that could possibly work with what you're trying to go for.
CS
3039
Mark • 12/17/2019, 2:17:43 PM
will these work with sonus? Or what would I need to make them work?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Mark:
These speakers will work fine with the SONOS product. Either the SONOS Connect Amplifier or you could go with a SONOS connect Pre-amp and our AMP120. Either way you need an amplifier to drive these speakers whether its built in with the SONOS Connect Amplifier or adding our OSD AMP120 to the Connect Pre-Amp (no internal power).
Good luck:
TL/3790