Filters
Product Search

    Secure Checkout
    Your Shopping Cart Is Empty

    Secure Checkout

    SKU: OSD-AP650-PAR

    OSD AP6506.5" Outdoor Patio Speaker Pair w/ Optional 70V Tap, IP54 Rated, White or Black

    Purchase 6.5" 2-Way Outdoor Patio Speaker Pair w/ Optional 70V Tap, IP54 Rated, White or Black AP650
    • Outdoor Speaker Depot SKU: OSD-AP650-PAR apprspp
    • $194.99

      Compare at: $291.99
      You Save: $97

    • Color:  

      Options:  

    • Countdown Truck
      FREE Delivery by ,
      Order within hours and minutes
      Change Shipping Zip ? Free Shipping Over $50
      More Delivery Options

    Lifetime Tech Support

    Guarantee

    Lifetime Tech Support

    The OSD Audio AP650 outdoor patio speaker pair is the perfect choice for enhancing your outdoor audio experience. With an IP54 rating for protection against dust and water, these speakers feature a frequency response of 35Hz to 22kHz +/- 10dB, power handling of 150W, and sensitivity of 90 dB. The gold-plated spring-loaded binding posts ensure a secure connection. The powder-coated rust-resistant aluminum grille, ABS polymer enclosure and full motion bracket make these speakers durable for outdoor use and easy to install in any position. The 6.5-inch water resistant paper cone woofer provides full sound and deep, rich bass. These speakers are perfect for patios, decks and overhangs and are safe from pool chemicals. They are sold as a pair and available in black or white, and comes with a 1-year warranty.

    Features:
    • Mounting bracket is designed to mount either vertically or horizontally
    • Available with 70V switch for commercial installations
    • Gold-plated spring compression binding posts for optimum connectivity
    • Sturdy ABS polymer frame
    • Powder-coated rust-resistant aluminum grille

    Warning: California's Proposition 65

    Warning:

    This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

    • Speaker Type: 6.5" Indoor/ Outdoor Patio Speakers, 70V Optional
    • IP54 Rated
    • Woofer: 6.5" Water Resistant Paper Cone Woofer
    • Tweeter: 1" Silk Dome
    • Frequency Response: 35Hz to 22kHz +/- 10dB
    • Power handling: 150W
    • Sensitivity: 90 dB
    • Impedance: 8 Ohms w/ Optional 70V Transformer Built-In
    • 70V Taps: 32W, 16W, 8W and 4W
    • Gold-Plated Spring-Loaded Binding Posts
    • Powder-coated Rust-resistant Aluminum Grille
    • Full Motion Bracket
    • Unit Dimensions: (L x H x D) 11.9" x 7.8" x 7.6"
    • Sold As: Pair
    • Colors Available: Black / White
    • Weight: 9 lbs Each Speaker
    • Warranty: 1 year
    93 Questions asked
    Have a Questions?

    What's on your mind?


    Gary staples • 12/17/2019, 2:17:43 PM For marine use, have a fusion av755 stereo aboard with two Bose speakers in saloon. Interested in AP 650 speakers for helm station outside which is protected by a hardtop. Is this a good choice or would you recommend something else. Thanks, appreciate your expertise. I haven't used your product, but I see excellent reviews from satisfied customers.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Gary: The AP650 would be an excellent choice since it is a sealed design with an outdoor rating of IP:X6. Note, the AP650 stereo pairs is an 8-ohm speaker, and the Fusion AV755 has internal amplifiers rated at 2/4 ohms. What are your Bose speakers rated at (4 or 8 ohms)? If 8 ohm then wired in parallel with the AP650 should create an acceptable 4-ohm load. If you needed to add a second pair of AP650, the Fusion AV might handle that as well whether you are playing both inside and outside at the same time. Good luck TL/5294
    Alex S. • 12/17/2019, 2:17:43 PM Do the 70v version of the AP650's have an 8ohm setting also??  I would assume that they do as I have yet to see a 70v speaker that doesn't have an 8ohm tap in addition to the various 70v taps.   I am only asking because I need these for a project that will either get a 70v amp or a regular amp.   I am not sure yet about the amp so it would be ideal to have the option for both scenarios with the speakers. 
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Alex:The Models AP650T Black and AP650T White both feature an 8-ohm option as well as the four 70V tap settings; 4W, 8W, 16W, 32W. Both are currently in stock.TL/ 5532
    Rudy • 12/17/2019, 2:17:43 PM Can I connect ap650 speaker to my tv without using an amp?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Rudy:The AP650 are passive. They do need to connect to an Amplifier. Most Televisions have enough problems adding good sounding speakers, let alone adding a speaker level output for external speakers. Our best option for adding our AP650 would be our NERO XD Streamer Integrated Power Amplifier. If it is for outdoor television, you would need to have a weatherproof enclosure to mount the NERO. If it is for a bedroom or other wall mounted TV indoors it features a compact size with a wall mounting kit. Most of the new TV/Monitors feature either RCA Analog output or Fiber Optic. The NERO has a Fiber Optic input where the native signal sent from the TV to the D/A converter of the NERO XD Streamer with its Audiophile Grade 16/24 bit 192khz specs. It also has built-in Bluetooth and Wi-Fi complete with a Free OSD Audio Control App. So you have a total of five different inputs. Add to that you also have a dedicated Subwoofer output for adding a Powered Subwoofer that you control the volume with either the master volume control on the front panel or utilizing IR Wireless remote. The NERO is also 4-ohm stable able to connect two pair of 8-ohm speakers. You can add additional NERO XD Streamers in other rooms and link them together. Please check it out.Good luckTL/5571
    NotAPickle • 12/17/2019, 2:17:43 PM Amazon is selling AP650 70V with model # B007KZ9K2M.  Is this an older model? Is it IPX6 rated?  Are there any technical differences to what is being advertised here?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Anthony:All our CL3 Rated Speaker Wire, 16, 14 and 12 gauge are 100% pure Oxygen Free Copper. We do not use Copper Clad Aluminum for any of our Speaker Wire.TL/2825
    Jeffrey • 12/17/2019, 2:17:43 PM Hello my name is JEFF, I just bought the ap650's to replace my old Yamaha's. I'm only using 2 not 4 but my buddy says I need an amp to get the most out of these speakers. What amp do you recommend is suitable for these speakers. Thanks.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Jeff:What were you using to power your two pair of Yamaha speakers? Was it from a zone 2 output from an AVR Yamaha Receiver? What sources were you using? Please let me know the Brand and model numbers of any component you were using so I can best answer your question. And why not two pair of AP650?tim@osdaudio.comTL/5593