Filters

Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AP670-PAR 6.5" 2-Way Architectural Indoor/Outdoor Weather-Resistant Patio Speaker Pair, Black Or White - AP670


Purchase 6.5" 2-Way Architectural Indoor/Outdoor Weather-Resistant Patio Speaker Pair, Black Or White - AP670
  • SKU: OSD-AP670-PAR 6-5inch-visual-patio-speaker-ap670

    6.5" 2-Way Architectural Indoor/Outdoor Weather-Resistant Patio Speaker Pair, Black Or White - AP670

  • $149.99

    Compare at: $199.99 You Save $50.00

  • Color:  

Calculate Shipping

Guarantee

Lifetime Tech Support

The AP670 outdoor patio speakers have a sleek, modern appearance that many customers appreciate. These outdoor speakers perform quite well at high listening levels and have a larger cabinet. Sold in pairs, the AP670s offer up rich bass and handling power up to 120 Watts. OSD patio speakers are designed for full weather versatility and can take the hot and cold weather for years to come. With exceptional sound quality, flexible mounting possibilities, and a sleek unobtrusive look, the AP670s will fill your patio, deck, or pool area with the tunes you crave. The included swivel-brackets also let you mount them vertically or horizontally.

Features:

  • Swivel mounting bracket for placement flexibility
  • Gold-plated spring compression binding posts for optimum connectivity
  • Low resonance composite cabinetry
  • Aluminum grill for rustproof
  • Power-coated rust-resistant grille
Do I need special cable to run outdoor speakers?
We strongly recommend our direct burial, CL3/FT4 waterproof cable and wire connectors that are designed for the outdoors. Our speaker wire uses a specially formulated UV-resistant, white polyethylene jacket that provides protection against water damage and allows the cables to withstand extreme weather conditions like rain, snow and high temperatures and incorporate twice the insulation of average cable. If you plan to bury the cable, OSD recommends you bury it 4-6" underground so that it's not visible nor pose a danger of somebody tripping over it. Our speaker cable is ideal to use in direct burial applications. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

Add Volume Controls
Volume controls can be a great addition to a system providing both proper impedance matching and more hands-on local control of the volume in the listening area. We offer a great selection of outdoor volume controls to choose from!

Warning: California's Proposition 65

Warning:

 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Speaker Type: 6.5" 2-Way Indoor/ Outdoor Patio Speakers
  • Woofer: 6.5" Waterproof Paper Cone
  • Tweeter: 1" Silk Dome
  • Frequency Response: 44Hz to 22kHz
  • Power handling: 120W
  • Sensitivity: 90 dB
  • Impedance: 8 Ohms
  • Inputs: Gold-Plated Spring-Loaded Binding Posts
  • Weather Resistant: All-Weather Versatility
  • Powder-coated Rust-resistant Aluminum Grille
  • Low Resonance Composite Cabinetry
  • Handles Temperature Fluctuations From -20F to 200F
  • Install-friendly Mounting Brackets Included
  • Unit Dimensions: (L x H x D) 8.25" x 14.56" x 7.88"
  • Sold As: Pair
  • Wireless: No 
  • Colors Available: Black or White
  • Weight: 9 lbs Each Speaker
  • Warranty: 1 year
48 Questions asked on 6.5" 2-Way Architectural Indoor/Outdoor Weather-Resistant Patio Speaker Pair, Black Or White - AP670

Brian • 12/17/2019, 2:17:43 PM Q If I mount these out in the open will they have good base and overall sound. Some people recommend you put them against a wall for opt sound. Is that necessary? If I put them in the open on 4x4s will I have to mount a piece of plywood behind them? And if so, how big a piece will be necessary?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Brian: If you are placing speakers out in the open with full exposure to the elements you might want to look at the AP650 versus the AP670. The AP650 is a sealed design with a IP-6X weather resistant rating (our highest rated speakers). The AP670 has a dual port design which means if has to be shielded from direct exposure to the elements. The AP650 and AP525 are part of our newest series that features a unique Mounting bracket that swivels and tilts for more flexibility when mounting. The Cabinet is stronger and more durable as well. The AP670 has been a great speaker for us but based upon your application I would recommend the AP650. Higher Power rating (150 to 120), Slightly higher sensitivity (91dB vs 90dB) and lower Frequency Response (37Hz vs 44 Hz). Regarding adding a backboard there is typically more effective if you mount the speaker in a corner where it might have more bottom end from coupling from the adjacent wall. I would first place a 4 x 4 foot board on the back of the 4 x 4 post, then try it on the front of the 4 x 4 between the speaker and post. You might try reducing the board to a 2 x 2 and compare as well. Good luck TL/4424
Mike • 12/17/2019, 2:17:43 PM Q I am thinking about using this line of speakers for height speakers for dts-x and dolby atmos. Which speaker with the 6.5 inch woofer do you recommend?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Mike: We typically like to recommend our ACE670 6.5" iN CEILING ANGLED SPEAKERS IDEAL FOR SURROUND OR EFFECTS SPEAKERS (Dolby ATMOS OR DTS; X). The AP650 would be your best choice for a Patio Indoor/Outdoor speaker due to the unique two way mounting bracket that both tilts and swivels so you can aim it like the Angled speaker. TL/5332
Tom B. • 12/17/2019, 2:17:43 PM Q I currently own your AP840 Outdoor Patio Speaker 8" 200W High Performance 2-Way speakers and have installed on my rear covered deck that measures 24 x 26 ft and has vaulted trussed ceiling. I have these hung on one side pointing down and they sound great! I want to add 2 more speakers to get a more "Surround" sound when listening.  I am powering via my Denon AVR-X1100W receiver using the Multi Zone Amp feature. This provides enough power for the existing speakers however only offers 2 speaker outputs. I wanted to ask these questions: 1. Would these A670's be a good addition?  2. Would you recommend a add on Amplifier to accomodate the addtional speakers? If so which one?  The receiver does have a Zoen 2 Pre Out to connect an amp. Would I need a 4 channel due to 4 speakers?Look forward to hearing from you soon so I can take advantage of your sale going on. Please advise! Thx! Tom Badinghaus 
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Tom:Based upon the DENON Specs, I would suggest adding our AMP200 to the Zone 2 Preamp output to add the second pair of speakers for your application. The AMP200 has Speaker A and Speaker B output and can play separately or together. The DENON rated at 80 Watts at 8-ohm which is ok to drive a single 8-ohm pair of speakers like the AP840. But when adding a second pair of 8-ohm speakers in parallel (both speakers connected to the Surround Back Left and Right Speaker level Outputs), the load drops to 4-ohm. The AMP200 also creates a 4-ohm load when both Speaker A and Speaker B are played together (also considered a Parallel connection). The difference is the AMP200 is a High Current Amplifier stable down to 2 -ohm. When the AMP sees a 4-ohm load the current demand more than doubles, and more current produces a dramatic increase of Heat in the Audio Output section. The difference is the amp has ample internal heatsink (That is why it weighs 24 pounds) which the output devices are mounted directly to the metal. The amp is built to do 4-ohm. Running it at 8-ohm is like driving a Corvette on the highway at 35 miles an hour.TL/5657