Secure Checkout
We are shipping today , Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: XA5180 5X Channel Hi Fidelity Home Theatre Amplifier, Class H 180W/channel Full Five Channel Driven XA5180

Purchase 5X Channel Hi Fidelity Home Theatre Amplifier, Class H 180W/channel Full Five Channel Driven XA5180
  • SKU: XA5180 5-channel-amp-180w-osd-audio-xa5180

    5X Channel Hi Fidelity Home Theatre Amplifier, Class H 180W/channel Full Five Channel Driven XA5180

  • $599.99

    Compare at: $899.95 You Save $299.96

    Sold Out Expected Back In Stock 10/25/2020
    Notify Me When Back In Stock!

Calculate Shipping


Lifetime Tech Support

Designing and building an amazing surround sound system begins with the right separates and paramount to the mix is the right multi-channel amplifier. This amplifier is a 5-channel Class H amp that supplies 180W per channel of clean power, and when paired with great speakers like ours, you'll hear music and movie soundtracks with exceptional detail, accuracy and warmth. The advanced circuitry, wide bandwidth, and low distortion capabilities of this amp allow listeners to hear spine-tingling sonic nuances, and this beefy amp can be matched with even power-hungry in-wall or freestanding loudspeakers. Designed with a high-output toroidal power supply and ample heat sinks to keep things cool, this amp has a clean, brushed metal finish and front panel status indicators that add a high-tech ambiance to any equipment rack.

Includes Balanced and Unbalanced Inputs
This high current home theater amplifier includes both balanced and unbalanced inputs for more flexible installation options and cable runs. XLR inputs (balanced) include a ground wire which make it a good choice for long (up to 2000 ft) cable runs, while unbalanced (RCA) provide a more reliable signal on shorter runs. 

Advanced Class H Hybrid Technology
Our amplifier is a Class H amplifier that combines the benefits of Class A/B in a more efficient package. Class H amplifiers are a variation of Class A/B amps but include high voltage and low voltage rails to modulate power consumption. When power is running high, the amp switches to the high voltage rails. When the amp is running low, it switches to the low voltage rails. The result is more efficiency, cooler temperatures, and a reduction in power consumption while maintaining the warmth and accuracy of a true A/B amp without the "digital" drawbacks (like interference) of Class D amps.

Warning: California's Proposition 65


 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to

  • Design Type: Class H
  • Power Handling: 120W(RMS)/ 240W(MAX) Per Channel @ 8 Ohm
  • Power Handling: 180W(RMS)/ 360W(MAX) Per Channel @ 4 Ohm
  • Power Bandwith: 5Hz - 54kHz +0/-3 dB
  • Crosstalk: Greater than -70dB from 20Hz ' 20kHz
  • Frequency Response: 20Hz to 20kHz +/-0.5dB
  • Impedance: 8 ohm to 4 ohm stable
  • Power: 120VAC, '3%, 50Hz - 60Hz
  • High quality gold XLR/ RCA inputs per channel
  • Turn on options: manual on, signal auto sensing, and 12V trigger
  • Input and Output Terminals: Audio inputs, remote trigger input, manual/trigger power switch, speaker outputs, balanced XLR, unbalanced RCA
  • Rack Mountable: Yes
  • Dual Source Switching: No
  • Dimensions (W x H x D): 17" x 6.0" x 16.75"
  • Weight: 50 Lbs
  • Warranty: 2 years
28 Questions asked on 5X Channel Hi Fidelity Home Theatre Amplifier, Class H 180W/channel Full Five Channel Driven XA5180

Von • 12/17/2019, 2:17:43 PM Q Leaning towards this amp over the outlaw 5000 mostly because of price does this amp have the same clean sound and power as its more expensive competitors and the inside of this amp looks amazingly similar to the outlaw 5000 was it made to rival that amp at a cheaper price point
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Von: I would say they are on par with each other except our five channel features Balanced as well as Unbalanced Inputs. The Balanced line gives you an extra 6 to 10dB increase with virtually no noise. In reality, we should be selling this amp for more than the Outlaw, but this is a sale price to help to move inventory. With the money, you save you can upgrade your AVR to a model with Balanced Line outputs. Good luck whichever way you go TL/5244
-K- • 12/17/2019, 2:17:43 PM Q Question about part of your answer(from before).. if I use RCA to XLR, do I still benefit from the Balanced XLR "signal is increased 6 to 10 dB"(and virtually no noise)" example, denon receiver pre-outs(RCA) RCA to XLR then to the amp. -Thanks in advance for answering this.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi K: There is no advantage when converting the Unbalanced output to the XLR balanced input. The signal will still be unbalanced. You need to connect to a Receiver that has a Balanced Line differential output to gain the higher output signal and also noise canceling (no matter what the distance) advantage. Your better off running a Good single RCA Unbalanced cable like our AURUM Single RCA Directional Subwoofer Cable. TL/5250
Davone • 12/17/2019, 2:17:43 PM Q how much does the amp weigh on amazon it says 25 pounds on this website it says 54 pounds which one is correct.
Customer Service • 12/17/2019, 2:17:43 PM
A HI Davonne: 54 pounds is the gross shipping weight including packaging. Actual weight is listed as 50 pounds. Custom-designed high current power supply driven by a .9 KVA Toroidal transformer. Class AB Four discrete output devices for each channel. 27,200 uF per channel filter capacitance protected by advanced protection circuitry. Custom-designed heatsinks on each amplifier module, enabling the amplifier to function at full power without the need for noisy fans. TL/5259
Mike • 12/17/2019, 2:17:43 PM Q Is a trigger cable included with the XA5180 amplifier? If so, how long is it? Thanks.
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Mike: We do not include a Trigger cable for any of our amplifiers that feature a 12V trigger option. It typically uses a mono Aux cable, but I believe any aux cable will do. TL/5271
Erick Martinez • 12/17/2019, 2:17:43 PM Q I have a Denon avr x4300 receiver and an Audiosource 2 channel amp in a 7.2.4 set up. The Denon outputs 125 watts per channel 2 channel driven. If I do the math, if I run 9 channels of the receiver ( which I am doing ), its probably sending 60 watts per channel, maybe a little more. My speakers being Klipsch which are very sensitive, act very well wit this amount of power. But I don't know if I am getting the best sound that can come from them. How much of a difference will this amp make as far as more volume and cleaner more clear sound ( if at all possible)?
Customer Service • 12/17/2019, 2:17:43 PM
A Hi Eric: I would recommend this amp for your front stage utilizing three channels. I would connect channels 1, 3 and 5. With only three channels connected the output (all three channels) would be 200 watts per channel at 8 ohms. That would leave six channels driven from your DENON and 2 channels driven from your AudioSource (I am assuming either the AMP110 or AMP210). You should have received a response to your initial question. I think this AMP would be an excellent value along with the performance you are looking to achieve. Good luck TL/5273