Mobile Navigation
My Account

1.888.779.4968

Call for Support
Home / Product Category / SPEAKERS / Ceiling Speakers / Commercial 70V Ceiling Speakers / ICE800ST 8" 2-Way Ceiling Speaker 70V with Backcan Single White

ICE800ST 8" 2-Way Ceiling Speaker 70V with Backcan Single White

Product code: OSD-ICE800ST

In Stock
Free Shipping
OSD Price: $88.99
Compare at: $119.95 You Save: $30.96 (26%)
Sold in single 1 = 1 pc
Qty:
30-Day Money Back Guarantee
LIFETIME TECH SUPPORT

Features & Specifications

The ICE800ST is a high-end commercial speaker that will come through with excellent sound quality even in crowded, noisy environments. Not only does this speaker offer high power handling, the 8" polypropylene woofer and 1" pivoting tweeter configuration is similar to home theater speakers where sound clarity is fine tuned. If you want "beyond good" sound quality and a speaker that rises above the clamor and noise, the ICE800ST will be an excellent choice.

For a retrofit installation, no construction bracket is needed

Specifications

Other Product Info

Ceiling speaker with backcan is great for commercial application.

Accessories

OWNER'S MANUAL

  View Owner's Manual          

QUESTIONS & ANSWERS

7 Questions & 7 Answers
Ar
from Fullerton asked:
August 19, 2019
Hi

I'm planning to buy 12 of this speakers and use the amp PA150, How the sound will be at 5w @ 70v setting? Using the wire 16 G.

1 Answer
Hi Ar:


The PA150, rated at 120 watts, the rule of thumb is to calculate your setup using 80% of the rated power. So you would have 96 watts available. You could connect up to 19 speakers with the taps set to 5W. Or there may be higher traffic areas where you can set up to 6 of the ICE800ST to 10W and the other six speakers at 5W. All your speakers do not have to have the same Tap setting. 16 gauge will work correctly for this application.


TL/5653

Submitted by: Tim Leahy on August 21, 2019

John AVCam
from Shreveport, LA asked:
April 13, 2018
Is there an advantage in this speaker having its highest tap value at 10 watts when most others have higher tap values of 20 or 30 watt?
1 Answer
Hi John: The combination of 8" and transformer with 10 Watts as its highest setting allowed us to be very competitive with this speaker. It does have an 8 ohm setting which it will do 120 Watts and go down to 45Hz at 89 dB sensitivity. Plus featuring tuned back can with safety ring, win, win, win! TL/4907
Submitted by: Tim Leahy on April 17, 2018

John InView
from Shreveport, LA asked:
March 30, 2018
I purchased a PC640 to test out. I am impressed with its sound, however I feel that I need the lower frequencies. So, now I am considering the ICE800ST,.... however I really need a pendant type design. So, are there points on the backcan that can be drilled to add eyebolts with nuts to use as suspended speakers? Or, do you have a kit to do that?
1 Answer
Hi John: There is a safety ring which connects to a safety wire but this speaker is definitely meant for in-ceiling where the mounting brackets and back can are hidden in the ceiling. And yes with a Frequency response of 45 Hz it definitely will deliver more bass compared to the PC at 120. Do you have the space to add sub woofers to go along with the pendant speakers. Checkout our SL800 on-wall sub with an 8.0 and 10 inch woofer. We have a custom installer who runs four of these subs around the Boiling Crab Restaurants out in Southern California. He connects as series parallel so the four show a 8 ohm load to the Dedicated Sub woofer amplifier but has four times the power handling, much lower distortion and the sensitivity is closer to 100 Hz. They connect with a SAM300 sub amp (found on our OSD Audio.com website). On the good side the PC have much greater dispersion pattern and are complimented by the subs. TL/4878
Submitted by: Tim Leahy on April 17, 2018

Rick
from Hamden, CT asked:
March 14, 2016
Will I need a bracket to install in a drop tile ceiling
1 Answer
Hi Rick: The speaker will mount in a drop down ceiling as is but we do recommend cutting the hole and mounting the speaker in the tile after you have removed it from the ceiling. Another tip is to have you add small wooden strips (1 x 3 x 1/4") underneath each Dog Ear Mounting clamp. This increases the striking surface for the clamp and provides a wider more stable base to clamp down on the tile. With the Tile removed from the ceiling it is much easier to secure the speaker with these wooden strips while mounting the speaker to the tile. TL/3755
Submitted by: Customer Service - Q&A on March 14, 2016

Rick
from CT asked:
February 10, 2016
Do these come with a grill?
1 Answer
HI Rick: All of our in-ceiling and in-wall speakers include paint-able grills. Note these are priced as each. You can use as 8 ohm speaker or use in a 70 Volt system, Just connect the speaker and set tap to either 8 ohm of one of four tap settings; 1.2 W, 2.5 W, 5 W or 10 W. Good Luck TL/3700
Submitted by: Customer Service - Q&A on February 11, 2016

Martin Schultz
from Fond du Lac, Wisconsin asked:
October 9, 2012
I am looking at these for a patio area at a bar / restaurant. they would be mounted in the sofit to a 70 volt pa system. Will these handle the elements?
1 Answer
Hi Martin, This speaker should work fine. Assuming they will be down firing, the sealed baffle/enclosure should have no problem in your commercial setting. TL/MA 1325
Submitted by: Customer Service - Q&A on October 9, 2012

Somchat Stiwatthanah
from Alexandria, VA asked:
May 16, 2012
I want to but 6 of this speaker. Do you have in stock?
1 Answer
Somchat, This one as of today is currently do not have 6 in stock. I see you are interested in the ICE840st and those are in stock. CL
Submitted by: Customer Service - Q&A on May 17, 2012

Product Reviews