SKU: OSD-ATM-7
OSD ATM77x Zone Automatic Speaker Selector w/ Remote Control IR Code
New improved we dim the blue led indicator light so it is not too bright at night. Speaker selector switches allow you to connect multiple pairs of speakers to your stereo receiver or amplifier. The ATM 7-Zone Speaker Selector with Remote Control can control up to seven pairs of speakers so you can listen to music in multiple rooms simultaneously.
ATM 7-Zone Speaker Selector includes an IR remote control. With a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to any of your favorite universal remote control with the factory code we provide.
ATM 7-Zone Speaker Selector includes an IR remote control. With a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to any of your favorite universal remote control with the factory code we provide.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Selector Type: 7 Zone Speaker Selector w/ IR Remote Control
- # of Zones or Speaker Pairs: 7
- Single Source
- Impedance Protection: No
- Maximum Operating Range: 400W
- Input Source: 7 Inputs to Speaker A/B or 2 Sources to 7 Zones
- Input/ Output Connector Type: Multi-way Binding Posts
- Last Call Back-up Memory Function
- Rack Mountable: Yes, 1.5RU
- Remote Control: Yes
- Dimensions (L x H x D): 16.5" x 3" x 7.87"
- Weight: 7 lbs
- Warranty: 2 Years
- The ATM7 does not have any Internal Impedance Matching Protection
- Note: We recommend adding Impedance Matching Volume Controls for each zone if you are planning to play more than two 8-ohm pairs of speakers at the same time.
- With 5 meters cable length
- With 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface.
View Owner's Manual
113 Questions asked
Have a Questions?
What's on your mind?
Jeff • 12/17/2019, 2:17:43 PM
I am wondering if this unit allows the A/B channels to be used simultaneously. If so, I can use the unit to drive the fronts/rears of two different rooms with 5.1 systems. I would simply need to add a 1:2 splitter for the center channel and the amp I am using will drive two separate sub woofers.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jeff,
The ATM-7 speaker selector does A or B and is not designed to do both at the same time.
CL/MA 1999
Rodney Blanchard • 12/17/2019, 2:17:43 PM
Can anyone tell me what the THD (Total Harmonic Distortion) ratio is for this product?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Rodney,
There is no power supply in line with the signal path. Like our other speaker selectors, it is totally passive,
so whatever the source is rated is what is passed through. Thanks!
-BM
2121
Roger • 12/17/2019, 2:17:43 PM
I moved into the house that is pre-wired for speakers in the master bedroom, dining room, formal room and the patio. I have a Denon 7:2 amp in the family room. I am trying to hook up 5:2 in the family room for home theater and then take 2 speakers to a speaker selector switch and hook rest of the four rooms to switch and then play music alternately in each room. Would that work or I will need an amp? Also, is there a possibility of playing two rooms at same time with that set up.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Roger
Thanks for the question.
The 2 speaker output channel that you are going to try to use to power the speakers in your bedrooms is likely not powerful enough. Since the single output channel will be driving 4 pairs of speakers in the bedrooms, it will place a great strain on your receiver. For this situation, an amplifier would be best to power your whole house audio setup, while your receiver does your home theater. Consider the amp200 or amp300 to power the speakers in the bedrooms along with a speaker selector like the atm-7, iss4, or ssvc4. Using this method you could play music in any combination of rooms at the same time.
Please call us if you have any other questions
562.697.2600
DB
2129
Yanyong Latthiwan • 12/17/2019, 2:17:43 PM
How much the shipping cost to Bangkok, Thailand?
Customer Service • 12/17/2019, 2:17:43 PM
We would need an exact address to get you the quote. You can also use the shipping calculator on the ATM-7 product page. Thanks!
Tim • 12/17/2019, 2:17:43 PM
More of a comment than a question.... seems strange there would be a full-function remote with no power button. I would think that would be the #1 use of a remote - to turn a device off and on.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Tim,
Thank you. There isn't a master on/off button on the remote, but there is one for each of the 7 zones. The unit is technically passive. The power supply lights up the LEDs but when the LEDs goes off, the circuit is closed and no signal is passed through that zone. Hope that helps. Thanks!
-BM
2265