Filters
Product Search

    Secure Checkout
    Your Shopping Cart Is Empty

    Secure Checkout

    SKU: OSD-ATM-7

    OSD ATM77x Zone Automatic Speaker Selector w/ Remote Control IR Code

    Purchase 7x Zone Automatic Speaker Selector w/ Remote Control IR Code ATM7
    • Outdoor Speaker Depot SKU: OSD-ATM-7 7-pair-speaker-selector-with-remote-control
    • In Stock

      $199.99

      Compare at: $416.99
      You Save: $217

    • Countdown Truck
      FREE Delivery by ,
      Order within hours and minutes
      Change Shipping Zip ? Free Shipping Over $50
      More Delivery Options

    Lifetime Tech Support

    Guarantee

    Lifetime Tech Support

    New improved we dim the blue led indicator light so it is not too bright at night. Speaker selector switches allow you to connect multiple pairs of speakers to your stereo receiver or amplifier. The ATM 7-Zone Speaker Selector with Remote Control can control up to seven pairs of speakers so you can listen to music in multiple rooms simultaneously.

    ATM 7-Zone Speaker Selector includes an IR remote control. With a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to any of your favorite universal remote control with the factory code we provide.

    Warning: California's Proposition 65

    Warning:

    This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

    • Speaker Selector Type: 7 Zone Speaker Selector w/ IR Remote Control
    • # of Zones or Speaker Pairs: 7
    • Single Source
    • Impedance Protection: No
    • Maximum Operating Range: 400W
    • Input Source: 7 Inputs to Speaker A/B or 2 Sources to 7 Zones
    • Input/ Output Connector Type: Multi-way Binding Posts
    • Last Call Back-up Memory Function
    • Rack Mountable: Yes, 1.5RU
    • Remote Control: Yes
    • Dimensions (L x H x D): 16.5" x 3" x 7.87"
    • Weight: 7 lbs
    • Warranty: 2 Years
    • The ATM7 does not have any Internal Impedance Matching Protection
    • Note: We recommend adding Impedance Matching Volume Controls for each zone if you are planning to play more than two 8-ohm pairs of speakers at the same time.

    Infrared Emitter Information and Installation Guide:

    • With 5 meters cable length
    • With 3.5mm mono standard plug
    • With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface.
    113 Questions asked
    Have a Questions?

    What's on your mind?


    Dane • 12/17/2019, 2:17:43 PM I have a Denon AVR3803 that I use for 5.1 surround sound. I would like to connect Peavey Crest Audio CKS 800-2 amp to my Zone 2 to power whole house audio. The amp is rated for 400W per channel @ 8 Ohms. Will this selector handle that kind of power? Thanks
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Dane, Sounds like a nice setup. The ATM-7 can handle a total of 400 watts, so I believe it's 200 per channel. Your amp may advertise as 400wpc, but I wonder how you would have to have it set up in order to output that many watts. You may want to contact the manufacturer of that amp to inquire as to how many watts actually outputs at standard volume. Let us know what you come up with. -BM 2497
    Zack • 12/17/2019, 2:17:43 PM Hi Im planning to hook up a Front Pair of Speakers which is bi-wired(2 connection for +ve and 2 connection for -ve speaker terminal) for each speaker. I need to alternate the Inputs for the front pair from a Yamaha AV673 receiver for Home theatre and Marantz 7004 Integrated Amp for 2 channel stereo both of which are in a bi-wired configuration as described above. Please advise if this is possible with the ATM 7-Zone.. Thanks Best Regards Zack
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Zack, Thank you for contacting us. What are you using as your crossover network for your bi-wired configuration? CS 2536
    Ryan • 12/17/2019, 2:17:43 PM I am interested in your AMP-7 speaker selector. Currently have 5 pairs of speakers wired around my house. I currently use the 2 in the living room ceiling and a pair of outdoor sparkers the most. I currently have a Sony Muti Channel AV receiver (STR-DH540). Can I make this amp work to run 3 pairs of speakers with you selector?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Ryan, This is a great speaker selector, because you get remote control unlike our other speaker selectors. On the other hand, this selector doesn't have impedance protection as our other selectors do, so it's required to use impedance matching volume controls on each zone. I don't believe your receiver will work with this selector, because it's a surround sound 5.2 receiver, so its main purpose is for home theater. If it has a 2nd zone, that zone can probably only handle one pair of speakers. What you would need to run the ATM-7 is the AMP200 or AMP300 depending on the total amount of speakers you want to run eventually. AMP200 can handle up to 4-5 pairs while the AMP300 can handle as many as 10 pairs. Let us know if you have any questions. Thanks. -BM 2580
    Patrick • 12/17/2019, 2:17:43 PM Does the ATM-7 switch both positive and negative signals? That is, is this design implemented with a "common ground?" I'm interested in using bridged/BTL output amps and they cannot be used with a common ground designs. Thanks.
    Customer Service • 12/17/2019, 2:17:43 PM
    Patrick, Good question. Let me look into and get back to you. In the meantime, can you tell us what amp you are planning to use exactly? Thanks. -BM 2586
    Tommy • 12/17/2019, 2:17:43 PM My unit keeps turning off the speaker zone that I've selected after about a minute of play. Why would that be?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Tommy, What kind of amp are you powering it with? What speakers are you using and how many pairs? BM 2656