Product Search

    Secure Checkout
    Your Shopping Cart Is Empty

    Secure Checkout


    OSD ICE600TTWRS6.5" Weather-Resistant Outdoor/ Indoor Dual Tweeter Stereo In-Ceiling Speaker, Single

    Purchase 6.5" Weather-Resistant Outdoor/ Indoor Dual Tweeter Stereo In-Ceiling Speaker, Single - ICE600TTWRS
    • Outdoor Speaker Depot SKU: OSD-ICE600TTWRS weather-resistant-in-ceiling-speakers
    • In Stock


      Compare at: $52.99
      You Save: $17.63

    • Countdown Truck
      FREE Delivery by ,
      Order within hours and minutes
      Change Shipping Zip ? Free Shipping Over $50
      More Delivery Options

    Lifetime Tech Support


    Lifetime Tech Support

    Relax in the tub and enjoy beautiful sound with this water-resistant 6.5" in-ceiling speaker! With 150W power handling, this in-ceiling speaker is the solution to bringing quality audio to high moisture areas, and is constructed of durable, moisture-resistant materials for use in high-humidity areas such as bathrooms, laundry rooms, kitchens, patios, under outdoor eaves or covered porches. Sold as a single speaker, the ICE600TTWRS offers excellent stereo sound and takes up half the space of a standard speaker pair, while still delivering smooth, 2-channel sound. The aluminum grill cover is rust-resistant for wet application. This weather-resistant speaker was created specifically for an application where you have a right (+/-) and left (+/-) stereo signal coming into a room/ space where you only have space for a single speaker. Just connect one pair of conductors to one set of inputs (+/-) and the second pair of conductors to the second set of inputs.

    What Is a Dual Voice Coil Ceiling Speaker?
    A Dual Voice Coil (DVC) Ceiling Speaker uses a special voice coil cone design that allows both channels of a stereo system to drive one cone. Sounds complicated but it's not. Basically, a DVC speaker plays both right and left channels through one speaker cone. You get both channels but without the acoustic separation that happens with two speakers. There are places like bathrooms, closets or hallways that just can’t accommodate multiple speakers, so a DVC speaker solves the problem and produces great sound.

    How Does this Speaker Mount in the Ceiling?
    Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.

    What Type of Speaker Wire and What Gauge?
    Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

    Testing the Sound Quality of In-Ceiling Speakers
    Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.

    For a retrofit installation, no construction bracket is needed. 

    Warning: California's Proposition 65


    This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to

    • Speaker Type: 6.5" Weather Resistant Indoor/Outdoor Dual Tweeter Trimless Ceiling Speaker
    • Woofer: 6.5" Polypropylene Cone with Santoprene Surround
    • Tweeter: Dual 1" Polycarbonate Dome
    • Frequency Response: 48Hz-20kHz
    • Power Handling: 150W
    • Sensitivity: 89 dB
    • Impedance: 8 Ohms
    • Weather-resistant for High Moisture Situations
    • Perfect for Outdoor or Indoor Use
    • Dual Voice Coil (DVC) Provides Stereo Sound Within One Speaker
    • Spray Paintable Rust-Resistant Aluminum Grille Included
    • Inputs: Spring Loaded Binding Posts
    • Install-friendly Dog Ear Installation Brackets
    • See New Construction Brackets For Compatibility
    • Diameter & Depth: 9.06" x 4.33"
    • Cutout Diameter: 7.95"
    • Sold As: Single
    • Warranty: 10 Years
    24 Questions asked
    Have a Questions?

    What's on your mind?

    Paja Alilovic • 12/17/2019, 2:17:43 PM I purchased 6 of this speakers and I daisy chain them with two wires, left and right from the first one to the second then to third and like that to the 6th. It is unfortunately all on 2 cables. The ceiling is already closed. How powerful amplifier need to be to have a normal sound. Thanks.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Paja: It is not just a question of how much power you use for your 6 dual voice coil speakers wired in parallel, there is an issue as to what impedance load you will have with this wiring configuration. Technically after the first three speakers are connected you have a 2.6-ohm load before you even load the last 3 speakers. You may need to place impedance matching Volume Control in between the Amp and the first pair of speakers. Something like our OSD OVC300, SVC300 or even an SSVC1. (speaker selector with built-in SVC300). So the OVC300 is an outdoor VC. The SVC300 is an in-wall VC and the SSVC1 is a Speaker Selector box with the SVC300 mounted internally. All three have the same impedance settings, 1/2X, 4X and 8X. Then I would recommend an AMP200 to power your six speakers. You would need to set the Impedance Matching to 8X in whichever Impedance matching device you selected. The AMP200 is a High Current Amplifier that is stable down to 2 ohms. Good luck TL/5062
    Travis • 12/17/2019, 2:17:43 PM I'm mounting these speakers in my cieling. Do I need a speaker enclosure to cover the back of the speaker to protect it from the attic environment? And if I do, can you recommend one?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Travis: The following link is for the protective cover we would recommend you use to keep out any debris from the back of the speaker; TL/5330
    Jennifer • 05/13/2023, 6:12:09 PM I only have one speaker wire going to where this is located. Can I still hook up the second set of connections. Daisy chain?
    Customer Service • 06/05/2023, 5:28:41 PM
    Hi Jennifer: If your speaker wire connection is two conductors (+/-), the first connection is 8 ohms. If you split the speaker wire and connect the same wire to the second input as well, you create a 4-ohm load for the amplifier. This is OK if that is all you connect to your Amp/receiver. Your connection will be limited to either a single right or left channel. Can you let me know more about the rest of your system so I can better respond to your question? Contact me at TimL
    Jennifer • 05/13/2023, 6:12:51 PM I only have one speaker wire going to where this is located. Can I still hook up the second set of connections. Daisy chain?
    Not yet Answered.