Filters
Product Search

    Secure Checkout
    Your Shopping Cart Is Empty

    Secure Checkout

    SKU: OSD-ICE800TTWRS

    OSD ICE800TTWRS8" Weather-Resistant Outdoor/ Indoor Dual Tweeter Stereo In-Ceiling Speaker, Single

    Purchase 8" Weather-Resistant Outdoor/ Indoor Dual Tweeter Stereo In-Ceiling Speaker, Single - ICE800TTWRS
    • Outdoor Speaker Depot SKU: OSD-ICE800TTWRS outdoor-ceiling-speakers
    • In Stock

      $52.12

      Compare at: $77.99
      You Save: $25.87

    • Countdown Truck
      FREE Delivery by ,
      Order within hours and minutes
      Change Shipping Zip ? Free Shipping Over $50
      More Delivery Options

    Lifetime Tech Support

    Guarantee

    Lifetime Tech Support

    Relax in the tub and enjoy beautiful sound with this water-resistant 8" in-ceiling speaker! With 150W power handling, this in-ceiling speaker is the solution to bringing quality audio to high moisture areas, and is constructed of durable, moisture-resistant materials for use in high-humidity areas such as bathrooms, laundry rooms, kitchens, patios, under outdoor eaves or covered porches. Sold as a single speaker, the ICE800TTWRS offers excellent stereo sound and takes up half the space of a standard speaker pair, while still delivering smooth, 2-channel sound. The aluminum grill cover is rust-resistant for wet application. This weather-resistant speaker was created specifically for an application where you have a right (+/-) and left (+/-) stereo signal coming into a room/ space where you only have space for a single speaker. Just connect one pair of conductors to one set of inputs (+/-) and the second pair of conductors to the second set of inputs.

    What Is a Dual Voice Coil Ceiling Speaker?
    A Dual Voice Coil (DVC) Ceiling Speaker uses a special voice coil cone design that allows both channels of a stereo system to drive one cone. Sounds complicated but it's not. Basically, a DVC speaker plays both right and left channels through one speaker cone. You get both channels but without the acoustic separation that happens with two speakers. There are places like bathrooms, closets or hallways that just can’t accommodate multiple speakers, so a DVC speaker solves the problem and produces great sound.

    How Does this Speaker Mount in the Ceiling?
    Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.

    What Type of Speaker Wire and What Gauge?
    Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

    Testing the Sound Quality of In-Ceiling Speakers
    Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.

    For a retrofit installation, no construction bracket is needed. 

    Warning: California's Proposition 65

    Warning:

    This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

    • Speaker Type: 8" Weather Resistant Indoor/Outdoor Dual Tweeter Trimless Ceiling Speaker
    • Woofer: 8" Polypropylene Cone with Santoprene Surround
    • Tweeter: Dual 1" Polycarbonate Dome
    • Frequency Response: 38Hz-21kHz
    • Power Handling: 150W
    • Sensitivity: 89 dB
    • Impedance: 8 Ohms
    • Weather-resistant for High Moisture Situations
    • Perfect for Outdoor or Indoor Use
    • Dual Voice Coil (DVC) Provides Stereo Sound Within One Speaker
    • Spray Paintable Rust-Resistant Aluminum Grille Included
    • Inputs: Spring Loaded Binding Posts
    • Install-friendly Dog Ear Installation Brackets
    • See New Construction Brackets For Compatibility
    • Diameter & Depth: 10.24" x 4.13"
    • Cutout Diameter: 9.06"
    • Sold As: Single
    • Warranty: 10 Years
    42 Questions asked
    Have a Questions?

    What's on your mind?


    Brandon Vaughan • 12/17/2019, 2:17:43 PM I have an 8 ohm receiver and I purchased two speakers. Is this the correct wiring pattern? These are two on my rear porch in the ceiling.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Brandon: Thank you for the drawing. I am not sure if that is the proper way since you are crossing your right and left connections. I am assuming you have the two speakers far apart and are not worried about stereo separation. I am thinking; you have already installed the speakers and run a two conductor wire between the two speakers. What Receiver are you using? Will it do a 4-ohm load if we connect both speakers in parallel (this would take a four conductor or two two conductor cables to wire in parallel). Do you have a Mono stereo switch on your Receiver? If we were able to convert the output signal to Mono and switching the speakers to our step up 8-inch ICE840 WRS weatherproof outdoor speakers ($99.00 a pair). If you can not switch to mono on your receiver, I would suggest adding our Pre One Preamplifier with a stereo-mono switch. I will send you diagrams and additional email in a sperate email. My email is tim@osdaudio.com. Note there is 30-day performance guarantee on the ICE800TT WRS. Let me know about the Receiver/Source and how far apart are the speakers? TL/5368
    John • 03/25/2021, 8:42:55 PM The specifications need some clarifications for weather conditions, like storage temperature range and operating temperature range. I live in the hot/cold state of Indiana-20F to +100F For the: 8" Weather-Resistant Outdoor/ Indoor Dual Tweeter Stereo In-Ceiling Speaker, Single Model - ICE800TTWRS
    Customer Service • 04/21/2021, 11:58:00 AM
    Hi John: I believe the range is somewhere between -40F and 180F. We been selling these more than 15 years for all of North America. TimL