Filters

Secure Checkout
SAME DAY SHIPPING IF ORDERED BEFORE 2PM PST + Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-ICE610 6.5" Contract Series 120W Flush Mount 2-Way In-Ceiling Speaker Pair - ICE610


Purchase 6.5" Contract Series 120W Flush Mount 2-Way In-Ceiling Speaker Pair - ICE610
  • SKU: OSD-ICE610 htincesp1

    6.5" Contract Series 120W Flush Mount 2-Way In-Ceiling Speaker Pair - ICE610

  • $45.22

    Compare at: $67.99 You Save $22.77

    Sold Out Expected Back In Stock 11/15/2021
    Notify Me When Back In Stock!
    FREE Delivery by ,
    If ordered within hours and minutes
    Not Shipping to ?
    More Delivery Options

Calculate Shipping

Guarantee

Lifetime Tech Support

In our 6.5-inch category, the ICE610 contractor series speaker with polypropylene cone woofer is a cost effective way for the builder or homeowner to add speakers to every room with a fraction of the cost. In spite of the low price, however, customers continually review the ICE610s as exceptionally solid sounding speakers. Contributing to this is the larger 6.5-inch polypropylene cone woofer with butyl rubber surround and .5'' PEI dome tweeter. Surrounding the speaker cone, Butyl Rubber Surround is a tough, moisture-resistant rubber that helps reflect energy and provides excellent sound damping characteristics. The ICE610s are an excellent choice for price-conscious customers who appreciate a good value.

Pivoting Titanium Dome Tweeter
The job of the tweeter is to deliver the higher frequencies of music and soundtracks. The tweeter is also adjustable, meaning it can be aimed toward the listening area. This can make a big difference in sound quality especially for dialog and higher frequencies.

How Does this Speaker Mount in the Ceiling?
Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.

What Type of Speaker Wire and What Gauge?
Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire. 

What Is Butyl Rubber Surround?
With almost double the shelf life of foam, butyl rubber has been the choice of speaker designers looking to optimize the sound based upon materials that go together. The Surround is just one of the integral parts of the speaker's motor structure. Butyl Rubber gives the speaker more excursion capability featuring a deeper bass with a wider frequency response, and its shelf life is closer to 25 years compared to the foam at 12 to 15 years.

Testing the Sound Quality of In-Ceiling Speakers
Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.

For a retrofit installation, no construction bracket is needed.

Warning: California's Proposition 65

Warning:

This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Speaker Type: 6.5" Flush-Mount Ceiling Speakers
  • Woofer: 6.5" Polypropylene Cone with Rubber Surround
  • Tweeter: .5" Pivoting PEI Dome
  • Frequency Response: 50Hz - 22kHz
  • Power Handling: 120W
  • Sensitivity: 88 dB
  • Impedance: 8 Ohms
  • Infinite Baffle Design
  • Spray Paintable Snap-In Grille Included
  • Inputs: Spring Loaded Binding Posts
  • Install-friendly Dog Ear Installation Brackets
  • See New Construction Brackets For Compatibility
  • Diameter & Depth: 9" x 3.33"
  • Cutout Diameter: 8"
  • Sold As: Pair
  • Warranty: 10 Years
13 Questions asked
Have a Questions?

What's on your mind?


heath boutwell • 12/17/2019, 2:17:43 PM I bought a pair of these and intend to install with impedance matching volume controls. What is the impedance of these speakers? I don't see the Ohms listed anywhere. Thanks
Customer Service • 12/17/2019, 2:17:43 PM
Hi Heath: All of our In-Ceiling and In-Wall speakers are 8 ohm. How many speakers are you connecting besides the ICE610 that you are concerned with the Impedance of this single pair? tim@osdaudio.com TL/3978
Brett • 12/17/2019, 2:17:43 PM I am going to purchase 4 pairs of these and hook up to my Yamaha receiver. What else do I need to purchase for this set up to work. I ran 1 wire from the receiver to a speaker then branched off to the other speaker and did that for each pair.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Brett: Which Yamaha Amplifier (model #)? And how many zones and how many speakers per each? You ran a single two conductor cable to a single speaker then extended it to a second speaker. Where did you see a wiring diagram that showed you this concept? Why did you not run a 2 conductor to each speaker? in the zone. You are describing a 70V wiring diagram. Is this 70V Yamaha COMMERCIAL Amp/Receiver? tim@osdaudio.com TL/4572
Jim White • 12/17/2019, 2:17:43 PM These are going into an existing installation (backyard covered patio). The existing drywall holes are 8.5" in diameter. Will these speakers still work? I'm assuming they will, but want to make sure before ordering. Thanks in advance!
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jim:That will leave you a 1/4/.25" wiggle room around the speaker. It should work, but you should be looking at our WRS series, which is a weather Resistant speaker ideal for outdoor covered patio application like yours. But all of our choices are 7 3/4"/7.75 or a little less that would not work in an 8.5" hole. Too bad you can not make the cutout hole bigger so you could use our ICE840WRS which needs a cutout of 9.0 inches.TL/5627