Skip to main content
Free shipping over $50 | 60-day returns
Since 2003

Account 0 Cart
Purchase OSD Audio ICE1080HD 10" 3 Way In Ceiling Speaker, 150W, Pivoting Tweeter, Single
  • 10inch-ceiling-speakers1
  • In-Ceiling Speaker

  • ICE1080HD 10" 3 Way In Ceiling Speaker, 150W, Pivoting Tweeter, Single

  • $272.49
    10" 3-Way 150W
    • Dedicated 2.5" mid-range for high-definition detail
    • Retrofit install, no construction bracket needed
    • Dog-ear brackets, paintable snap-in grille
  • In Stock
    Countdown Truck
    FREE Delivery by ,
    Order within hours and minutes
    Change Shipping Zip ? $50+ Free Shipping (Exceptions Apply)
    More Delivery Options

  • Free shipping over $50
  • 60-day money-back guarantee
  • Lifetime tech support

Lifetime Tech Support

Guarantee

Lifetime Tech Support

Specifications

SKU
OSD-ICE1080HD
  • Speaker Type: 10" 3-Way Flush-Mount Ceiling Speaker
  • Woofer: 10" Injected Composite Paper Cone
  • Tweeter: 1" Ferrofluid Cooled Silk Dome
  • Midrange: 2.5" Treated Paper Cone
  • Frequency Response: 30Hz - 20kHz
  • Power Handling: 150W
  • Sensitivity: 89 dB @ 1W/1M
  • Impedance: 8 Ohms
  • Spray Paintable Snap-In Grille Included
  • Inputs: Gold-plated 5-way Binding Posts
  • Install-friendly Dog Ear Installation Brackets
  • Diameter & Depth: 13.58" x 6.30"
  • Cutout Diameter: 12.17"
  • Sold As: Single
  • Warranty: 10 Years

Description

The OSD Audio ICE1080HD is a 10 inch 3 way in-ceiling speaker built for serious home theaters, media rooms and dedicated listening spaces. Instead of asking one woofer and one tweeter to cover everything, it splits the work across three drivers, so every part of the sound stays clear at higher volumes.

A 10 inch injected composite paper cone woofer delivers deep, room-filling bass down to 30Hz. A 2.5 inch treated paper cone midrange handles vocals and dialogue, and a 1 inch ferrofluid cooled silk dome tweeter adds smooth, detailed highs. The midrange and tweeter both pivot, so you can aim them toward the listening area for a focused sound stage.

With 150 watts of power handling, 89 dB sensitivity and an 8 ohm load, the ICE1080HD works with most AV receivers and amplifiers. Gold-plated 5-way binding posts make wiring simple.

Installation uses built-in dog ear clamps that grip the drywall as you tighten the screws, so no mounting brackets are needed for retrofit installs. The snap-in grille can be spray painted to match your ceiling. For best results, use CL3 or FT4 rated in-wall speaker wire, 16 gauge up to 100 feet and 14 gauge for longer runs. This is a passive speaker and requires an amplifier or receiver.

Check the Fit

Needs a 12.17 inch cutout and 6.3 inches of clearance above the ceiling; slightly domed paintable grille is 13.58 inches across. Replacing speakers? Measure the old hole first. Dog ear clamps, no brackets needed. Sold as single

Key Features

  • True 3 Way Sound: 10 inch injected composite paper cone woofer, 2.5 inch treated paper cone midrange and 1 inch ferrofluid cooled silk dome tweeter each handle their own range for clean highs, clear vocals and full bass
  • Deep Bass From The Ceiling: The large 10 inch woofer reaches down to 30Hz, so movies and music keep their weight and impact even in larger rooms or systems without a dedicated subwoofer
  • Aim The Sound: Pivoting midrange and tweeter can be pointed toward your seating area for sharper dialogue and better imaging, ideal for home theater surrounds and off-center ceiling placement
  • 150W Power Handling: 89 dB sensitivity and 8 ohm impedance work with most AV receivers and stereo amplifiers; gold-plated 5-way binding posts accept bare wire, pins or banana plugs

Warning: California's Proposition 65
Warning:  

This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Reviews

Reviews for Outdoor Speaker Depot are collected and verified by Shopper Approved. Read our verified customer reviews.

Bought this? Shopper Approved will email you a link to review it after your purchase.

Questions & Answers

20 Questions asked

What's on your mind?

Katra • 12/17/2019, 2:17:43 PM 1. What is the crossover frequency for each driver (woofer, midrange, tweeter) ?? 2. Is the midrange a sealed enclosure? 3. Can these be purchased in bull or large quantities in the future (buying one to test it out)?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Katra: We have two 10" 3-Way Speakers that might work for you. The ICE1080HD Standard Frame threeway In-Ceiling Speaker Speaker Crossover Points: 1000 Hz and 3000 Hz, and has closed back midrange. Then there is the R103 Black Series threeway which features a Trimless frame with magnetic grill. Its crossover points are 1700 Hz and 2300 Hz The R103 is part of our Black Series lineup a direct to dealer custom speaker line. I will send you additional information on the Black Series to your email. When we added the R103, we also created a New Construction Bracket that works for both Models. We do have better pricing available depending on quantity and wholesale status. Please let me know more about your project; [email protected]. TL/5650
Katra • 08/27/2021, 1:28:52 PM I would like to put these in an enclousure, do you know what demension I would need to achieve 30hz? Also, what port lenth and size ? I would do the calculations myself, but there are no specs for the LF driver. Looking forward to your response!
Customer Service • 03/21/2023, 6:11:07 PM
I would build a 1.5 to 2.0 cubic foot enclosure, including the speaker. Do a sealed enclosure, then experiment with fiber fill to tune it. The more fiber fill, the more the speaker will think it is a larger box. The fiber absorbs the low frequencies. If you plan on adding the fiber, make it a 1.5 cubic foot. TimL/3-23
Katra • 12/01/2022, 9:38:22 PM The speaker is rated to go as low as 30hz, what box volume do I need to have so the speaker can hit that frequency?
Customer Service • 03/15/2023, 5:59:08 PM
Hi: 1 to 1.5 cubic foot would work fine. TL/2023
Katra • 12/13/2022, 0:47:47 AM Is the speaker 150 watts peak or rms?
Customer Service • 03/15/2023, 6:31:11 PM
Hi Katra: The conservative rating is 75 Watts RMS with a Peak of 150 Watts. TimL/2023
William Andries • 05/18/2023, 9:25:07 AM My round hole in the ceiling is 10 inches. What is the diameter of the 10 inch speaker on finished side?
Customer Service • 06/05/2023, 4:30:42 PM
Hi William: Here are the specs: Diameter & Depth: 13.58" x 6.30", Cutout Diameter: 12.17". There is a cutout template that comes with each speaker. You will need to cut the hole from 10" to 12.17". Before you tape the template to the ceiling using blue painter's tape, you will determine if the current spot is centered on the two ceiling joists checking clearance around the inside of the top. This will help determine the placement of the Cutout hole template. A Jab Saw can be used for a tile, Sheetrock ceiling, or a jig saw if more substantial. You would like the speaker centered on ensuring that none of the dog ear clamps are restricted. TimL 6-5