SKU: KIT-SMP100-IWS8 8" 150W Pro Series In-Wall Home Theater Subwoofer + 100W Mono-Channel Class D Subwoofer Amplifier
Compact Yet Powerful.
This new kit includes the 100W Mono-Channel Subwoofer Amplifier and the 8" 150W Pro-Series In-Wall Subwoofer.
Both may be on the smaller end, but piece them together and they'll make any home theater feel you're actually at the movie theater.
100W Mono-Channel Class D Subwoofer Amplifier
Our SMP100 Class D Digital Subwoofer Amplifier is a compact 100W amp designed to power passive subwoofers used in home theaters or whole house audio systems. We call this our 'tiny but mighty' powered sub because it comes in at a whopping 5.6 inches wide but it will supply an in-wall or stand-alone subwoofer the power it needs so you can experience wide spread low frequency impact (bass) on movie and music soundtracks. The advanced crossover circuit can be set at different frequency ranges (35Hz to 160Hz) and can be adjusted with the front-panel control knob. Additional features include front-panel adjustable phase and volume controls to dial in just the right amount of low frequency effects (LFE).
8" 150W Pro Series In-Wall Home Theater Subwoofer
In-wall subs are an amazing way to experience low frequency effects without taking up floor space. A great in-wall subwoofer at a great price, the IWS8 is an 8" passive sub with power handling up to 150 Watts. Installation is easy with our dog-ear bracket system that mounts to the sheet-rock after the cut-out hole has been made. The grille is also paintable to match your room decor and we include a cutout template that doubles as a paint shield.
OSD SMP100 100W Subwoofer Amplifier Mono, Class D, Auto Sensing, 4-8 Ohm, ETL CE Certified
- Design Type: Class D
- Power Output: 80W RMS @ 8 ohm w/ 160W Peak
- Power Output: 100W RMS @ 4 ohm w/ 200W Peak
- Frequency Response: 20Hz ~ 160Hz, +/-1dB
- Impedance: 8 ohm to 4 ohm stable
- Input Sensitivity: 200mV
- Crossover: 40-160Hz
- Phase: 0-180'
- Signal to Noise Ratio: 95dB
- Signal Sensing: Power On and Trigger Mode
- Automatic source switching
- Input and Output Terminals: RCA input, speaker level in/out, trigger, sub out
- Rack Mountable: No
- Dimensions (W x H x D): 5.6" x 1.8" x 4.75"
- Weight: 1.75 Lbs
- Warranty: 2 years
IWS8 8" 150W Pro Series In-Wall Home Theater Subwoofer, Easy Intall & Paintable Grille, Single
- Speaker Type: 8" In-Wall Subwoofer
- Woofer: 8" Polypropylene
- Frequency Response: 40Hz - 200Hz +/-3dB
- Power Handling: 150 Watts
- Sensitivity: 2.83V/1m: 87 dB
- Impedance: 8 Ohms
- Inputs: Spring Binding Posts
- Install-friendly Dog Ear Installation Brackets
- Cut-Out Template for Easy Installation
- Paintable Grille & Frame Included
- Integrated Rear Dust Shield
- Sold As: Single
- Mounting Depth (Assuming .5" Drywall): 3.63"
- Unit Dimensions: (L x H x D) 10" x 10" x 3.6"
- Cutout Dimensions: (L x H) 8.75" x 8.75"
- Weight: 6.5 lbs
- Warranty: 10 Years
- *Note: Requires Additional Subwoofer Amplifier
No Questions asked yet!