Filters
Product Search

    Secure Checkout
    Your Shopping Cart Is Empty

    Secure Checkout

    SKU: OSD-OVC300-PAR

    OSD OVC300300W Rotary Outdoor Volume Control, Impedance Matching and Weather Resistant, White or Grey

    Purchase 300W Rotary Outdoor Volume Control, Impedance Matching and Weather Resistant, White or Grey, OVC300
    • Outdoor Speaker Depot SKU: OSD-OVC300-PAR outdoor-volume-control
    • $39.99

      Compare at: $80.99
      You Save: $41

    • Color:  

    • Countdown Truck
      FREE Delivery by ,
      Order within hours and minutes
      Change Shipping Zip ? Free Shipping Over $50
      More Delivery Options

    Lifetime Tech Support

    Guarantee

    Lifetime Tech Support

    Unique easy-access impedance matching jumper setting without open the weatherproof seal box. If you enjoy an outdoor audio system, you'll love the convenience of outdoor volume controls! Now you can stop dragging the remote control outside where it is sure to get lost, or avoid having to get up and go to your audio source to turn the volume up or down. This pure resonance volume control offers 300 Watts of optimized sound quality with minimal bass roll-off. Control 1-8 pairs of speakers simultaneously with impedance matching. The autoformer design features outstanding sound quality due to high permeability steel utilization in the volume control core. Comes with Grey or white face plate. In addition, the OVC-300 includes an easy access impedance switch that lets you set the impedance without opening the box.

    Warning: California's Proposition 65

    Warning:

    This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

    • Volume Control Type: Outdoor 300W Impedance Matching Knob Style
    • Power Handling: 300W Peak; 150W RMS Per Channel
    • Frequency Response: 20Hz - 20kHz
    • Total Attenuation: -54 dB (Max)
    • Steps: 12 (Make Before Break)
    • Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers
    • Easy-Access Impedance-Matching Switch
    • Wiring Requirement: Up to 14 Gauge Wire
    • Weather-Resistant for Outdoor Use
    • Can Withstand -50F / +130F Degree Weather
    • Mounting Options: Use 3/4" PVC Conduit Pipe to Stand Alone or Mount to the Wall
    • Unit Dimensions: (L x H x D) 3.25" x 4.37" x 3"
    • Colors Available: Grey or White
    • Warranty: 5 Years
    65 Questions asked
    Have a Questions?

    What's on your mind?


    Jonathan Bailey • 12/17/2019, 2:17:43 PM I have a Denon AVR-1613 in my sunroom with two Klipsch Bookshelf speakers. I am wanting to add Two Klipsch AW-650's on my deck outside with the OVC-300 volume control. My question is what do I need to get this done. I have a niles single volume control to control volume in sunroom. What setting would I usefir the volume control.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Jonathan, Set both volume controls to 2x. You'll need CL3- rated speaker wire. We recommend our OSD 16-gauge four conductor cable from the receiver to the volume control then 16-gauge two conductor to each speaker. TL/MA 1 1533
    reggie • 12/17/2019, 2:17:43 PM I have a Onkyo TX-SR 806 I would like to run 4 pairs of speakers off it . Each one with haveing its on volume control. Can you tell me what i need to run this.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Reggie, Assuming you mean the ONKYO TX-SR608, your best setup is to go with an external high current power amplifier like our OSD AMP200 (connected directly to your second room pre-amplified outputs). Then add a ISS4 Speaker Selector (protection disabled, turned off) and four of the SVC300 impedance-matching volume controls (set to 4x) one in each zone. With this amplifier, you will also be able to power two pair of speakers per zone off the single volume control. For even more control in the room, select the SVC205 which features a true on/off switch on the front of the face plate. Let us know if you need help in picking out the proper speakers. Thank you for considering OSD branded products. TL /MA- 1554
    Matt • 12/17/2019, 2:17:43 PM Will 12 gauge wire work with this volume control? I am planning on hooking up my receiver to some outdoor rock speakers I just purchased. My receiver is in the basement on the opposite side of the house, so I imagine the run inside the house will be roughly 80 ft. The run from the house/volume control to the outside speakers will be about 10 feet. Everything I have wired to my receiver (inside surround sound and speakers running to my shop) is currently run off of 12AWG and I was planning on running 12AWG to the outdoor speakers as well.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Mac, Yes, you can use the powered speaker outputs into the speaker level input of the AMP300. This will become a signal level and allow any audio source that is playing through your receiver to be powered by the AMP300. CL/MA 1769
    jason • 12/17/2019, 2:17:43 PM I have a Onkyo TX 855 receiver and a Onkyo M 5010 amp and want to power 4 outdoor rock speakers. 2 rock speakers on each volume control. do I need a speaker selector also? Is this the correct volume control? How do I run the wiring?
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Jason, From your Onkyo-M 5010, wire two volume controls in parallel to each speaker pair. Then set the impedance to 2x on both. CL/MA 1803
    Rich • 12/17/2019, 2:17:43 PM I have a Yamaha VX-675 receiver with a Zone 2 single pair speaker terminal set. I also have a set of Insignia Outdoor rock speakers, 8 ohm-100watts and a set of Klipsch 8 ohm-75 watt speakers. What single volume control should be used and how would I wire it to the four speakers? The rocks will be around the pool while the Klipsch will be under the roofline.
    Customer Service • 12/17/2019, 2:17:43 PM
    Hi Rich, Sounds like you will need an amplifier to drive your extra pair. Consider our AMP200 if you plan on expanding or want more power than the receiver puts out for your outdoor speakers. If you only use one pair, the smaller AMP120 will suffice. We do not recommend doubling up on the Zone 2 with 4 speakers; rather add two OVC300 volume controls, one for each pair. Unlike with the receiver or AMP120, if you went with the high current AMP200, you can wire two pair to one OVC300 because the AMP200 can handle the load. CL/MA 1923