SKU: OSD-AP640-PAR
OSD AP6406.5" Outdoor Patio Speaker Pair w/ Optional 70V Tap, IP54 Rated, White or Black
The AP640 outdoor patio speaker pair is an ideal option for large outdoor spaces that require high-quality sound coverage. Rated IP54 for protection against dust and water, these speakers feature a frequency response of 37Hz to 20kHz +/- 10dB, power handling of 20-150W peak, sensitivity of 90dB. The gold-plated spring-loaded binding posts ensure a secure connection. The powder-coated rust-resistant aluminum grille, ABS polymer enclosure and 'U' bracket make these speakers durable for outdoor use. The speakers provide rich and true sound, and are perfect for patios, decks and overhangs measuring between 500 and 800 square feet. They are sold as a pair, available in black or white and come with a 1-year warranty.
Features:
- All-weather design withstands even harsh climates
- Mounting bracket is designed to mount either vertically or horizontally
- Gold-plated spring compression binding posts for optimum connectivity
- Sturdy ABS polymer frame
- Power-coated rust-resistant Aluminum grille
- 8ohm w/ 70V transformer built-in
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 6.5" 3-Way Indoor/ Outdoor Patio Speakers, 70V Optional
- IP54 Rated
- Woofer: 6.5" Polypropylene Cone
- Mid: 1" Fabric Dome
- Tweeter: 0.75" Piezo
- Frequency Response: 37Hz to 20kHz +/- 10dB
- Power handling: 20-150W Peak
- Sensitivity: 90dB
- Impedance: 8 Ohms w/ Optional 70V Transformer Built-In
- 70V Tap: 32W, 16W, 8W, 4W
- Gold-Plated Spring-Loaded Binding Posts
- Powder-coated Rust-resistant Aluminum Grille
- 'U' Bracket
- Unit Dimensions: (L x H x D) 11.4" x 8.5" x 7.6"
- Sold as: Pair
- Colors Available: Black / White
- Weight: 7.5" lbs each speaker
- Warranty: 1 year
View Owner's Manual
66 Questions asked
Have a Questions?
What's on your mind?
Brett • 12/17/2019, 2:17:43 PM
These will be used on a tennis court that will second as an ice rink in the winter. They will be pretty much exposed all the time. Do you sell covers for these ?? Michigan climate.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Brett,
We don't keep much of an inventory of the grills alone, but we do typically have a few on hand. I know we have quite a few black grills for the AP640 and they are paintable.
Kevin Hall • 12/17/2019, 2:17:43 PM
I have bought a pair of these almost 3 years ago. They are mounted under an eve, and are taken down mid-October through to May as I live in a northern climate. I noticed this year that the grills are rusting. I had thought that the grills were suppose to be rusted free. Can you tell me what can be done here? If I paint them I am afraid that it might close the holes some. Can new grills be purchased?
Thank you.
Customer Service • 12/17/2019, 2:17:43 PM
Hello Kevin,
Email our return department (rma@outdoorspeakerdepot.com) and inquire about these grills. Thank you.
Christopher Marty • 12/17/2019, 2:17:43 PM
What's the minimum suggested power to run these speakers? 150w MAX is listed, but that seems like a lot of power.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Christopher,
Usually with speakers, you would want to push 50-75% of what the speaker can handle. So in the case of this speaker, you want to push 75-112 watts.
Ed • 12/17/2019, 2:17:43 PM
Hi, connected 2 pair of these speakers to the AMP120. Depressed both buttons for simultaneous use. What is the optimum setting of the control knob on the speakers, when used like this? Why? Thx!!
Customer Service • 12/17/2019, 2:17:43 PM
Hello,
The knob on the back of the speaker is a 70v transformer. Keep this at "8ohm" when running off the AMP120. Note that this amp is intended to have only one zone playing at a time. Running both zones can sometimes cause the amp to overheat.
Austin Graves • 12/17/2019, 2:17:43 PM
What is the best sounding amp with these speakers?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Austin,
A pair of these would run great on our AMP120. If you're wanting to run multiple sets simultaneously, run them on our AMP200 or AMP300.