Filters

Secure Checkout
🚩Free Shipping On Orders Over $50
Your Shopping Cart Is Empty

Secure Checkout

SKU: OSD-AP840-PAR 8" 2-Way High Definition Outdoor Patio Speaker Pair 180W, IP54 Rated, Black or White AP840


Purchase 8" 2-Way High Definition Outdoor Patio Speaker Pair 180W, IP54 Rated, Black or White AP840
  • SKU: OSD-AP840-PAR aphipepa8pas

    8" 2-Way High Definition Outdoor Patio Speaker Pair 180W, IP54 Rated, Black or White AP840

  • $249.00

    Compare at: $373.99 You Save $124.99

    FREE Delivery by ,
    If ordered within hours and minutes
    Not Shipping to ?
    More Delivery Options
  • Color:  

Calculate Shipping

Guarantee

Lifetime Tech Support

Our OSD Audio AP840 outdoor patio speakers are great for large areas that require a high-end sound system for complete coverage outdoors. Featuring full sound and deep, rich bass, these weather-resistant patio speakers provide rich, true sound. The AP840 patio speaker pair has 8-inch polypropylene woofers to enhance even more bass than a 6.5-inch speaker, and a 1-inch Supernal tweeter to recreate the high notes. Whether you need full, rich sound for your own patio or deck, or you're looking for outdoor speakers for schools or other venues, you'll love these shining examples. Designed for outdoor conditions with weather-resistant components, the sturdy ABS polymer enclosure and rust-resistant aluminum grille is ideal for patios, decks and overhangs measuring between 500 and 800 square feet.They're available in black or white, and because they feature a sleek, unobtrusive design, they're a great choice for any outside space. 

Features
  • All-weather design withstands even harsh climates 
  • Mounting bracket is designed to mount either vertically or horizontally 
  • Gold-plated spring compression binding posts for optimum connectivity 
  • Sturdy ABS polymer frame 
  • Power-coated rust-resistant Aluminum grille
Do I need special cable to run outdoor speakers?
We strongly recommend our direct burial, CL3/FT4 waterproof cable and wire connectors that are designed for the outdoors. Our speaker wire uses a specially formulated UV-resistant, white polyethylene jacket that provides protection against water damage and allows the cables to withstand extreme weather conditions like rain, snow and high temperatures and incorporate twice the insulation of average cable. If you plan to bury the cable, OSD recommends you bury it 4-6" underground so that it's not visible nor pose a danger of somebody tripping over it. Our speaker cable is ideal to use in direct burial applications. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire.

Add Volume Controls
Volume controls can be a great addition to a system providing both proper impedance matching and more hands-on local control of the volume in the listening area. We offer a great selection of outdoor volume controls to choose from!

Warning: California's Proposition 65

Warning:

 This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • Speaker Type: 8" 2-Way Indoor/ Outdoor Patio Speakers
  • IP54 Rated
  • Woofer: 8" Polypropylene
  • Tweeter: 1" Fabric Dome
  • Frequency Response: 35Hz to 22kHz +/- dB
  • Power handling: 20-180W Peak
  • Sensitivity: 88 dB
  • Impedance: 8 Ohms
  • Gold-Plated Spring-Loaded Binding Posts
  • Powder-coated Rust-resistant Aluminum Grille
  • 'U' Bracket
  • Unit Dimensions: (L x H x D) 14.8" x 11" x 9.3"
  • Sold As: Pair
  • Colors Available: Black or White
  • Weight: 7.5 lbs Each Speaker
  • Warranty: 1 year
47 Questions asked
Have a Questions?

What's on your mind?


George • 12/17/2019, 2:17:43 PM I have a vintage Sansui 9090DB receiver, does it have adequate power to run 2,4 or 6 pairs of the AP840's?
Customer Service • 12/17/2019, 2:17:43 PM
Hi George, This patio speaker has 125W per channel. You may connect as many speakers as there are outputs; however, do not double up any channels. Rather, run a direct line back to the amp for each speaker. CL/MA 2036
Kevin • 12/17/2019, 2:17:43 PM I'm interested in a pair of these out to my patio. My concern is I may be buying too much capability for my amp. I am planning to put these on the AMP200 with another set of speakers in the house. Since the AMP200 pushes 250W, if all 4 speakers are being powered does that mean each gets 62.5RMS? or 125 if only two at a time? If so, would this set be overpowered for my application? Thanks!
Customer Service • 12/17/2019, 2:17:43 PM
Hi Kevin, The AMP200 is a high-current amplifier, so it's gonna push power out very efficiently. Running two pairs of speakers including the AP840 will not be a problem for this amp. There are two Master Level dials on the back of the amp that you can adjust the volume/gain with, so if you need a little more volume, just turn those up towards max. If you have any further questions, please call us here at 562-697-2600. Thanks! -BM 2118
thierry • 12/17/2019, 2:17:43 PM planing to install this speakers outside behind my yamaha amplifier R-S 300.Can they handle it??
Customer Service • 12/17/2019, 2:17:43 PM
Hi Thierry, It looks like your Yamaha receiver puts out about 50 watts per channel, meaning each of these speakers will be receiving approximately 50 watts. This should be fine, but that all depends on how you are planning on using them. If you want background music, this will work. If you are going to be having parties and want to turn them up, you would want a little more power running them. Thanks! -BM 2303
Moiss vargas • 12/17/2019, 2:17:43 PM How get this deal
Customer Service • 12/17/2019, 2:17:43 PM
Moises, You can place the order on the website or call in. Thanks!
Jessica • 12/17/2019, 2:17:43 PM Can you hook up an iPod or iPhone using an aux cord or USB with these speakers
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jessica, These are actually passive speaker, which means they need an amplifier or receiver to run power to them. An iPod or iPhone can be run to the amp/receiver which powers them, but not directly to the speakers. You may be interested in the BTP-650 Bluetooth patio speaker set. You can actually link your iPhone up directly to the speaker using Bluetooth. Let us know if that helps. Thanks. -BM 2400