SKU: KIT-IWS88-SMP200 IWS88 Dual 8" Woofers In Wall Subwoofer + SMP200 200W Mono-Channel Class D Subwoofer Amplifier
The IWS-88 in-wall subwoofer performs excellently for home theater surround sound applications as well as for listening to music with dual 8" Injected polypropylene woofers, bigger magnets and 350 Watts of power handling. Like all OSD Audio speakers, the IWS-88 includes a dog-ear bracket system that mounts securely to the sheet-rock after the cut-out hole has been made and the speaker has been dropped into the hole.
Our SMP200 Class D Digital Subwoofer Amplifier may be compact, but with 200W of power, this little amp packs a powerful punch. Designed to power passive subwoofers used in home theaters or whole house audio systems, the SMP200 measures less than nine inches wide and 10 inches deep but supplies an in-wall or stand-alone subwoofer with the power it needs so you can experience that gut wrenching, heart pounding low frequency impact (bass) on movie and music soundtracks.
IWS88 Dual 8" In Wall Subwoofer
- Speaker Type: Dual 8" In-Wall Subwoofer
- Woofer: Dual 8" Injected Polypropylene w/ Reinforced Back Plate
- Frequency Response: 38Hz-500Hz
- Power Handling: 350 Watts
- Sensitivity: 90 dB @ 1W/1M
- Impedance: 4 Ohms
- Inputs: Spring Binding Posts
- Install-friendly Dog Ear Installation Brackets
- Cut-Out Template for Easy Installation
- Paintable Grille Included
- Sold As: Single
- Mounting Depth (Assuming .5" Drywall): 3.56"
- Unit Dimensions: (L x H x D) 11.43" x 18.43" x 4"
- Cutout Dimensions: (L x H) 10.25" x 17.75"
- Weight: 11 lbs
- Warranty: 10 Years
- *Note: Requires Additional Subwoofer Amplifier
SMP200 200W Subwoofer Amplifier
- Amplifier Type: Subwoofer
- Amplifier Class: Digital Class D
- Channels: 1
- Power Output: 200 Watts @ 4 Ohm
- Power Output: 120W RMS @ 8 ohm w/ 240W Peak
- Power Output: 200W RMS @ 4 ohm w/ 400W Peak
- Frequency Response: 20Hz-160Hz +/-1dB THD: 1%
- Variable Crossover: 35Hz-160Hz
- Variable Phase Switch: 0 to 180 Degrees
- Impedance: 8 Ohm and 4 Ohm Stable
- Signal to Noise Ratio: 95dB
- 12V Trigger Mode
- Inputs: Speaker (High) Level / Signal (Low) Level RCA
- Dimensions (L x H x D): 8.5" x 1.75" x 9.8"
- Weight: 6.7 Lbs
- Warranty: 2 Years
No Questions asked yet!